Search   
MSDS 
:
 Acenaphthylene, 99+%
CAS 
:
 208-96-8
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 208-96-8 |Acenaphthylene | >99 | 205-917-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 208-96-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Yellow crystals and chunks
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 280 deg C
Freezing/Melting Point: 88 - 91 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 152.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 208-96-8: AB1254000 AB1254200
LD50/LC50:
CAS# 208-96-8: Oral, mouse: LD50 = 1760 mg/kg.
Carcinogenicity:
Acenaphthylene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
USA RQ: CAS# 208-96-8: 5000 lb final RQ; 2270 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 208-96-8: No information available.
Canada
CAS# 208-96-8 is listed on Canada's NDSL List.
CAS# 208-96-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 208-96-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/25/1999 Revision #3 Date: 10/08/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,3,5-Trichloro-2,4,6-Trifluorobenzene, 98% 319-88-0
Benzenesulfonyl fluoride, 99% 368-43-4
(S)-(+)-2-Phenylglycinol, 98% 20989-17-7
Ethyl Vinyl Sulfone, 98% 1889-59-4
Iodoacetic anhydride 54907-61-8
Ethyl phenyl sulfide, 97% 622-38-8
Indole-3-carboxylic acid, 99% 771-50-6
5-Acetyl-2,4-dimethylthiazole, 96% 38205-60-6
Ethyl Heptanoate, 99% 106-30-9
2-ETHYL-2-HEXENOIC ACID, 95%, PREDOMINANTLY TRANS 5309-52-4
Ethyl Isobutyrate, 99% 97-62-1
Furfuryl methyl sulfide, 97% 1438-91-1
trans-2-Hexenyl acetate, 98% 2497-18-9
2,5-Dimethyl-4-Hydroxy-3(2H)-Furanone, 95% 3658-77-3
Isobutyl Propionate, 98% 540-42-1
8-Mercaptomenthone, Mixture of Isomers, Tech., 80% 7732-18-5
Methyl propyl disulfide, 95% 2179-60-4
3-(Methylthio)-1-hexanol, 97% 51755-66-9
1,8-Octanedithiol, 99% 1191-62-4
Octyl acetate, 99+% 112-14-1
Poly(vinyl Stearate), Average MW ca. 90000 (GPC) 9003-95-6
Poly(2,6-Dimethyl-1,4-Phenylene Oxide) 25134-01-4
Polyacrylonitrile 25014-41-9
Poly(Ethylene Adipate), Average M.W. ca. 10.000 (GPC) 24937-78-8
Poly(methyl acrylate), solution in toluene, average MW ca. 40000 108-88-3
3-Chloropropyl acetate 628-09-1
Poly(Styrene-Co-Butadiene), 5% Styrene 9003-55-8
Poly(Vinyl Cinnamate), Average MW ca. 200000 (GPC) 9050-06-0
Poly(ethyl acrylate), approx. 20% solution in toluene, average M.W. 108-88-3
Poly(4-Methylstyrene), Average MW ca. 70000 (GPC) 24936-41-2
Poly(1-Butene), Isotactic, Average MW ca. 185000 (GPC) 9003-28-5
Polyethylene, Oxidized 68441-17-8
Poly(styrene-acrylonitrile), 25 wt.% acrylonitrile, average MW ca. 9003-54-7
Acenaphthylene, 99+% 208-96-8
Cyclohexyl Methacrylate, 97+% 101-43-9
4-Hydroxybutyl Acrylate, 96% 2478-10-6
Poly(acrylonitrile-co-butadiene-co-styrene) 9003-56-9
6-Methylnicotinic Acid, 99% 3222-47-7
Diphenyl Isophthalate, 99% 744-45-6
Diethyl Fluoromalonate, 97% 685-88-1
Phloretin, 98% 60-82-2
2,2,2-Trifluoroethyl Ether, 99% 333-36-8
Trifluoroacetic Acid Lithium Salt, 95% 2923-17-3
3,5-Bis(trifluoromethyl)benzaldehyde, 97% 401-95-6
3,5-Bis(Trifluoromethyl)Bromobenzene, 99% 328-70-1
3,5-Difluorobenzoic acid, 97% 455-40-3
3,5-Difluorobenzonitrile, 99% 64248-63-1
3,5-Difluorobenzoyl Chloride, 98% 129714-97-2
2,3-Difluorobenzyl Alcohol, 94% 75853-18-8
2,4-Difluorobenzyl alcohol, 99% 56456-47-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net