**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 401-95-6 |3,5-Bis(trifluoromethyl)benzaldehyde | 97 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated. Exposure to fluoride compounds can result in systemic
toxic effects on the heart, liver, and kidneys. It may also deplete
calcium levels in the body leading to hypocalcemia and death.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
Chronic inhalation and ingestion may cause chronic fluoride
poisoning (fluorosis) characterized by weight loss, weakness,
anemia, brittle bones, and stiff joints. Chronic exposure to
fluoride compounds may cause systemic toxicity.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back.
Combustible liquid and vapor.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 401-95-6:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 37 deg C @ 1.3 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 69 deg C ( 156.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.4600 g/cm3
Molecular Formula: C9H4F6O
Molecular Weight: 2242.12
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Not available.
Conditions to Avoid:
Ignition sources, electrical sparks, exposure to flame.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 401-95-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3,5-Bis(trifluoromethyl)benzaldehyde -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 401-95-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 401-95-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 401-95-6 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 1/09/1998 Revision #3 Date: 7/22/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1,3,5-Trichloro-2,4,6-Trifluorobenzene, 98%
| 319-88-0 |
|
Benzenesulfonyl fluoride, 99%
| 368-43-4 |
|
(S)-(+)-2-Phenylglycinol, 98%
| 20989-17-7 |
|
Ethyl Vinyl Sulfone, 98%
| 1889-59-4 |
|
Iodoacetic anhydride
| 54907-61-8 |
|
Ethyl phenyl sulfide, 97%
| 622-38-8 |
|
Indole-3-carboxylic acid, 99%
| 771-50-6 |
|
5-Acetyl-2,4-dimethylthiazole, 96%
| 38205-60-6 |
|
Ethyl Heptanoate, 99%
| 106-30-9 |
|
2-ETHYL-2-HEXENOIC ACID, 95%, PREDOMINANTLY TRANS
| 5309-52-4 |
|
Ethyl Isobutyrate, 99%
| 97-62-1 |
|
Furfuryl methyl sulfide, 97%
| 1438-91-1 |
|
trans-2-Hexenyl acetate, 98%
| 2497-18-9 |
|
2,5-Dimethyl-4-Hydroxy-3(2H)-Furanone, 95%
| 3658-77-3 |
|
Isobutyl Propionate, 98%
| 540-42-1 |
|
8-Mercaptomenthone, Mixture of Isomers, Tech., 80%
| 7732-18-5 |
|
Methyl propyl disulfide, 95%
| 2179-60-4 |
|
3-(Methylthio)-1-hexanol, 97%
| 51755-66-9 |
|
1,8-Octanedithiol, 99%
| 1191-62-4 |
|
Octyl acetate, 99+%
| 112-14-1 |
|
Poly(vinyl Stearate), Average MW ca. 90000 (GPC)
| 9003-95-6 |
|
Poly(2,6-Dimethyl-1,4-Phenylene Oxide)
| 25134-01-4 |
|
Polyacrylonitrile
| 25014-41-9 |
|
Poly(Ethylene Adipate), Average M.W. ca. 10.000 (GPC)
| 24937-78-8 |
|
Poly(methyl acrylate), solution in toluene, average MW ca. 40000
| 108-88-3 |
|
3-Chloropropyl acetate
| 628-09-1 |
|
Poly(Styrene-Co-Butadiene), 5% Styrene
| 9003-55-8 |
|
Poly(Vinyl Cinnamate), Average MW ca. 200000 (GPC)
| 9050-06-0 |
|
Poly(ethyl acrylate), approx. 20% solution in toluene, average M.W.
| 108-88-3 |
|
Poly(4-Methylstyrene), Average MW ca. 70000 (GPC)
| 24936-41-2 |
|
Poly(1-Butene), Isotactic, Average MW ca. 185000 (GPC)
| 9003-28-5 |
|
Polyethylene, Oxidized
| 68441-17-8 |
|
Poly(styrene-acrylonitrile), 25 wt.% acrylonitrile, average MW ca.
| 9003-54-7 |
|
Acenaphthylene, 99+%
| 208-96-8 |
|
Cyclohexyl Methacrylate, 97+%
| 101-43-9 |
|
4-Hydroxybutyl Acrylate, 96%
| 2478-10-6 |
|
Poly(acrylonitrile-co-butadiene-co-styrene)
| 9003-56-9 |
|
6-Methylnicotinic Acid, 99%
| 3222-47-7 |
|
Diphenyl Isophthalate, 99%
| 744-45-6 |
|
Diethyl Fluoromalonate, 97%
| 685-88-1 |
|
Phloretin, 98%
| 60-82-2 |
|
2,2,2-Trifluoroethyl Ether, 99%
| 333-36-8 |
|
Trifluoroacetic Acid Lithium Salt, 95%
| 2923-17-3 |
|
3,5-Bis(trifluoromethyl)benzaldehyde, 97%
| 401-95-6 |
|
3,5-Bis(Trifluoromethyl)Bromobenzene, 99%
| 328-70-1 |
|
3,5-Difluorobenzoic acid, 97%
| 455-40-3 |
|
3,5-Difluorobenzonitrile, 99%
| 64248-63-1 |
|
3,5-Difluorobenzoyl Chloride, 98%
| 129714-97-2 |
|
2,3-Difluorobenzyl Alcohol, 94%
| 75853-18-8 |
|
2,4-Difluorobenzyl alcohol, 99%
| 56456-47-4 |
|
|