Search   
MSDS 
:
 N,N-Dimethyltrimethylsilylamine, 97%
CAS 
:
 2083-91-2
SYNONYMS 
:
 N,N-Dimethylaminotrimethylsilane; N-Trimethylsilyldimethylamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2083-91-2 |N,N-Dimethyltrimethylsilylamine | 97 | 218-222-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F+ C
Risk Phrases: 12 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Extremely flammable. Causes burns.Moisture sensitive.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated. Amines can cause eye
irritation.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated. Amines have been known to
cause skin irritation and sensitization.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Vapors may cause
dizziness or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
During a fire, irritating and highly toxic gases may be generated by
thermal decomposition or combustion. Use water spray to keep
fire-exposed containers cool. Extremely flammable liquid and vapor.
Containers may explode in the heat of a fire. Will be easily ignited
by heat, sparks or flame.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Use agent most appropriate to extinguish fire. Do NOT
use straight streams of water. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2083-91-2:
United Kingdom, WEL - TWA: (listed as silica, amorphous): 6 mg/m3
(inhalable dust); 2.4 mg/m3 TWA (respirable dust)
United Kingdom, WEL - STEL: (listed as silica, amorphous): 18 mg/
STEL (inhalable dust); 7.2 mg/m3 STEL (respirable dust)

Russia: (listed as silica, amorphous): 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 30 hPa @ 0 C
Viscosity: Not available.
Boiling Point: 84 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: -19 deg C ( -2.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: decomposes
Specific Gravity/Density: .7320g/cm3
Molecular Formula: C5H15NSi
Molecular Weight: 117.27

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants, electrical sparks, exposure to flame.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, silicon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2083-91-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N,N-Dimethyltrimethylsilylamine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.*
Hazard Class: 3 (8)
UN Number: 2733
Packing Group: II
IMO
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3.1 (8)
UN Number: 2733
Packing Group: II
RID/ADR
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2733
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F+ C
Risk Phrases:
R 12 Extremely flammable.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2083-91-2: No information available.
Canada
CAS# 2083-91-2 is listed on Canada's NDSL List.
CAS# 2083-91-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2083-91-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/08/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Butylbenzaldehyde, 98% (GC) 1200-14-2
Propionamide, 97% 79-05-0
4-Nitrobenzenesulfonamide, 97% 6325-93-5
1,1-Dichloroacetone, 98% 513-88-2
N,N-Dimethyltrimethylsilylamine, 97% 2083-91-2
3,6-Bis(2-Hydroxyethyl)-2,5-Diketopiperazine, 98% 50975-79-6
Hexacosanoic Acid, 98% (GC) 506-46-7
S-Benzyl-L-Cysteine, 99% 3054-01-1
Selenium, powder, 99.5+%, 200 mesh 7782-49-2
N-Ethyl-5-phenylisoxazolium-3'-sulfonate, 95% 4156-16-5
Zirconium(IV) chloride, anhydrous, 98% 10026-11-6
Ethyl Malonyl Chloride, Tech., 90+% (titr.) 36239-09-5
Saccharin, sodium salt hydrate, 99+% 82385-42-0
3,4-Dichloronitrobenzene, 95% 99-54-7
Aq 38s
Allyl isothiocyanate, 94% 57-06-7
Phenanthrenequinone 95% 84-11-7
5-Fluoro-2-methylaniline, 99% 367-29-3
Magnesium Methyl Carbonate (1.8 M in DMF) 68-12-2
2-Chloro-3(Trifluoromethyl)Pyridine, 98+% 65753-47-1
5-Aminoindan, 96% 24425-40-9
R-(-)-1-Octen-3-Ol, 99% 3687-48-7
Germanium, Pieces, Irregular, 99.999% 7440-56-4
Di-Tert-Butyl Malonate 541-16-2
Adonitol, 99+% 488-81-3
Potassium perrhenate(vii), 99% 10466-65-6
Dl-norphenylephrine hydrochloride, 98% 15308-34-6
4-(4-Chlorophenyl)-4-hydroxypiperidine, 99 +%, crystalline 39512-49-7
1,5-Dihydroxynaphthalene, 99% 83-56-7
2,2-Diethoxyacetamide, 99% 61189-99-9
2,5-Dimethylpyrrolidine, 98%, Cis/Trans Mixture 3378-71-0
(S)-(+)-1,2-Propanediol, 99% 57-55-6
Harmane,98% 486-84-0
4,6-Dimethylpyrimidine, Tech., 93+% 1558-17-4
Diethylaluminum ethoxide, 25 wt% solution in toluene 108-88-3
Ethyl L-Lactate, 97% (GC) 687-47-8
5-Nitroisatin, 97% 611-09-6
3,5-Dihydroxybenzoic Acid, 97% 99-10-5
2-Acetylaminothiazole 2719-23-5
L-Tyrosine Methyl Ester, 98% 1080-06-4
n-Butyl propionate, 99+% 590-01-2
4-Methyl-3-Nitrobenzyl Chloride, 99% 84540-59-0
Methyl 4-Formylbenzoate Dimethyl Acetal, 95.7+% (GC) 42228-16-0
Ethyl palmitate, 98% 628-97-7
Hesperidin,97% 520-26-3
N,N'-bis(p-methoxybenzylidene)-alpha, alpha'-bi-p-toluidine, 99% 55290-05-6
6,7-Dihydroxy-3,4-Dihydroisoquinoline, 98% 4602-83-9
Benzoaza-15-crown-5, 99% 0-01-0
M-Hydroxycinnamic Acid, 99%, Predominantly Trans 14755-02-3
2,5-Dimethoxy-2,5-Dihydrofuran,99%,Cis/Trans Mixture 332-77-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net