Search   
MSDS 
:
 4-Methyl-3-Nitrobenzyl Chloride, 99%
CAS 
:
 84540-59-0
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 84540-59-0 |4-Methyl-3-Nitrobenzyl Chloride | 99% | 283-154-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.The toxicological properties of this material have not
been fully investigated.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause cardiac disturbances. The toxicological properties
of this substance have not been fully investigated. May cause
central nervous system effects. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Aspiration may lead to pulmonary edema. May cause cardiac
abnormalities. May cause systemic effects. Central nervous system
effects, which appear to predominate in acute cases are characterized
by abnormal fatigue, memory difficulties and dizziness.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid. Get medical aid immediately. Do
NOT induce vomiting. If conscious and alert, rinse mouth and drink
2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire. Do NOT get
water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Do not breathe dust, vapor, mist, or
gas. Do not get in eyes, on skin, or on clothing. Keep container
tightly closed. Do not ingest or inhale. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 84540-59-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Chunks
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 87.0 - 88.0 deg C @ .05mm Hg
Freezing/Melting Point: 48.00 - 50.00 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H8ClNO2
Molecular Weight: 185.61

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, bases, alcohols, amines, steel.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 84540-59-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Methyl-3-Nitrobenzyl Chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 6.1
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 84540-59-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 84540-59-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 84540-59-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Butylbenzaldehyde, 98% (GC) 1200-14-2
Propionamide, 97% 79-05-0
4-Nitrobenzenesulfonamide, 97% 6325-93-5
1,1-Dichloroacetone, 98% 513-88-2
N,N-Dimethyltrimethylsilylamine, 97% 2083-91-2
3,6-Bis(2-Hydroxyethyl)-2,5-Diketopiperazine, 98% 50975-79-6
Hexacosanoic Acid, 98% (GC) 506-46-7
S-Benzyl-L-Cysteine, 99% 3054-01-1
Selenium, powder, 99.5+%, 200 mesh 7782-49-2
N-Ethyl-5-phenylisoxazolium-3'-sulfonate, 95% 4156-16-5
Zirconium(IV) chloride, anhydrous, 98% 10026-11-6
Ethyl Malonyl Chloride, Tech., 90+% (titr.) 36239-09-5
Saccharin, sodium salt hydrate, 99+% 82385-42-0
3,4-Dichloronitrobenzene, 95% 99-54-7
Aq 38s
Allyl isothiocyanate, 94% 57-06-7
Phenanthrenequinone 95% 84-11-7
5-Fluoro-2-methylaniline, 99% 367-29-3
Magnesium Methyl Carbonate (1.8 M in DMF) 68-12-2
2-Chloro-3(Trifluoromethyl)Pyridine, 98+% 65753-47-1
5-Aminoindan, 96% 24425-40-9
R-(-)-1-Octen-3-Ol, 99% 3687-48-7
Germanium, Pieces, Irregular, 99.999% 7440-56-4
Di-Tert-Butyl Malonate 541-16-2
Adonitol, 99+% 488-81-3
Potassium perrhenate(vii), 99% 10466-65-6
Dl-norphenylephrine hydrochloride, 98% 15308-34-6
4-(4-Chlorophenyl)-4-hydroxypiperidine, 99 +%, crystalline 39512-49-7
1,5-Dihydroxynaphthalene, 99% 83-56-7
2,2-Diethoxyacetamide, 99% 61189-99-9
2,5-Dimethylpyrrolidine, 98%, Cis/Trans Mixture 3378-71-0
(S)-(+)-1,2-Propanediol, 99% 57-55-6
Harmane,98% 486-84-0
4,6-Dimethylpyrimidine, Tech., 93+% 1558-17-4
Diethylaluminum ethoxide, 25 wt% solution in toluene 108-88-3
Ethyl L-Lactate, 97% (GC) 687-47-8
5-Nitroisatin, 97% 611-09-6
3,5-Dihydroxybenzoic Acid, 97% 99-10-5
2-Acetylaminothiazole 2719-23-5
L-Tyrosine Methyl Ester, 98% 1080-06-4
n-Butyl propionate, 99+% 590-01-2
4-Methyl-3-Nitrobenzyl Chloride, 99% 84540-59-0
Methyl 4-Formylbenzoate Dimethyl Acetal, 95.7+% (GC) 42228-16-0
Ethyl palmitate, 98% 628-97-7
Hesperidin,97% 520-26-3
N,N'-bis(p-methoxybenzylidene)-alpha, alpha'-bi-p-toluidine, 99% 55290-05-6
6,7-Dihydroxy-3,4-Dihydroisoquinoline, 98% 4602-83-9
Benzoaza-15-crown-5, 99% 0-01-0
M-Hydroxycinnamic Acid, 99%, Predominantly Trans 14755-02-3
2,5-Dimethoxy-2,5-Dihydrofuran,99%,Cis/Trans Mixture 332-77-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net