Search   
MSDS 
:
 Methyl 4-Formylbenzoate Dimethyl Acetal, 95.7+% (GC)
CAS 
:
 42228-16-0
SYNONYMS 
:
 None Listed.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 42228-16-0 |Methyl 4-Formylbenzoate Dimethyl Aceta| 95.7+% | 255-714-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas. Runoff
from fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use agent most
appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 42228-16-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 144 deg C @ 3.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 102 deg C ( 215.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: negligible
Specific Gravity/Density:
Molecular Formula: C11H14O4
Molecular Weight: 210.23

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 42228-16-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl 4-Formylbenzoate Dimethyl Acetal -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 42228-16-0: No information available.
Canada
CAS# 42228-16-0 is listed on Canada's NDSL List.
CAS# 42228-16-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 42228-16-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Butylbenzaldehyde, 98% (GC) 1200-14-2
Propionamide, 97% 79-05-0
4-Nitrobenzenesulfonamide, 97% 6325-93-5
1,1-Dichloroacetone, 98% 513-88-2
N,N-Dimethyltrimethylsilylamine, 97% 2083-91-2
3,6-Bis(2-Hydroxyethyl)-2,5-Diketopiperazine, 98% 50975-79-6
Hexacosanoic Acid, 98% (GC) 506-46-7
S-Benzyl-L-Cysteine, 99% 3054-01-1
Selenium, powder, 99.5+%, 200 mesh 7782-49-2
N-Ethyl-5-phenylisoxazolium-3'-sulfonate, 95% 4156-16-5
Zirconium(IV) chloride, anhydrous, 98% 10026-11-6
Ethyl Malonyl Chloride, Tech., 90+% (titr.) 36239-09-5
Saccharin, sodium salt hydrate, 99+% 82385-42-0
3,4-Dichloronitrobenzene, 95% 99-54-7
Aq 38s
Allyl isothiocyanate, 94% 57-06-7
Phenanthrenequinone 95% 84-11-7
5-Fluoro-2-methylaniline, 99% 367-29-3
Magnesium Methyl Carbonate (1.8 M in DMF) 68-12-2
2-Chloro-3(Trifluoromethyl)Pyridine, 98+% 65753-47-1
5-Aminoindan, 96% 24425-40-9
R-(-)-1-Octen-3-Ol, 99% 3687-48-7
Germanium, Pieces, Irregular, 99.999% 7440-56-4
Di-Tert-Butyl Malonate 541-16-2
Adonitol, 99+% 488-81-3
Potassium perrhenate(vii), 99% 10466-65-6
Dl-norphenylephrine hydrochloride, 98% 15308-34-6
4-(4-Chlorophenyl)-4-hydroxypiperidine, 99 +%, crystalline 39512-49-7
1,5-Dihydroxynaphthalene, 99% 83-56-7
2,2-Diethoxyacetamide, 99% 61189-99-9
2,5-Dimethylpyrrolidine, 98%, Cis/Trans Mixture 3378-71-0
(S)-(+)-1,2-Propanediol, 99% 57-55-6
Harmane,98% 486-84-0
4,6-Dimethylpyrimidine, Tech., 93+% 1558-17-4
Diethylaluminum ethoxide, 25 wt% solution in toluene 108-88-3
Ethyl L-Lactate, 97% (GC) 687-47-8
5-Nitroisatin, 97% 611-09-6
3,5-Dihydroxybenzoic Acid, 97% 99-10-5
2-Acetylaminothiazole 2719-23-5
L-Tyrosine Methyl Ester, 98% 1080-06-4
n-Butyl propionate, 99+% 590-01-2
4-Methyl-3-Nitrobenzyl Chloride, 99% 84540-59-0
Methyl 4-Formylbenzoate Dimethyl Acetal, 95.7+% (GC) 42228-16-0
Ethyl palmitate, 98% 628-97-7
Hesperidin,97% 520-26-3
N,N'-bis(p-methoxybenzylidene)-alpha, alpha'-bi-p-toluidine, 99% 55290-05-6
6,7-Dihydroxy-3,4-Dihydroisoquinoline, 98% 4602-83-9
Benzoaza-15-crown-5, 99% 0-01-0
M-Hydroxycinnamic Acid, 99%, Predominantly Trans 14755-02-3
2,5-Dimethoxy-2,5-Dihydrofuran,99%,Cis/Trans Mixture 332-77-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net