Search   
MSDS 
:
 1,1-Dichloroacetone, 98%
CAS 
:
 513-88-2
SYNONYMS 
:
 1,1-Dichloro-2-propanone; Alpha, alpha-dichloracetone; Dichloromethyl     methyl ketone; 2-Propanone, 1,1-dichloro-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 513-88-2 |1,1-Dichloroacetone | 98 | 208-175-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 10 20/21/22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful by inhalation, in contact with skin and if
swallowed. Irritating to eyes, respiratory system and
skin.Hygroscopic (absorbs moisture from the air).Lachrymator
(substance which increases the flow of tears).

Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears).
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal tract irritation.
Inhalation:
Causes respiratory tract irritation. Vapors may cause dizziness or
suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. If
breathing has ceased apply artificial respiration using oxygen and a
suitable mechanical device such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Water runoff can cause environmental damage. Dike
and collect water used to fight fire. Vapors may form an explosive
mixture with air. Vapors can travel to a source of ignition and
flash back. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Will burn if
involved in a fire. Use water spray to keep fire-exposed containers
cool. Containers may explode in the heat of a fire. Flammable liquid
and vapor. Vapors may be heavier than air. They can spread along
the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water. Cool containers with flooding quantities of water until well
after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors. Stop leak only
if you can do so without risk.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep away from heat,
sparks and flame. Avoid ingestion and inhalation. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers
to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 513-88-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Oily - Colorless Liquid
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 117.0 - 118.0 deg C @ 760.00m
Freezing/Melting Point: Not available.
Autoignition Temperature: 560 deg C ( 1,040.00 deg F)
Flash Point: 46 deg C ( 114.80 deg F)
Explosion Limits, lower: 4.40 vol %
Explosion Limits, upper: .00 vol %
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: 1.3070g/cm3
Molecular Formula: C3H4Cl2O
Molecular Weight: 126.97

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, contact with
water, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong reducing agents, strong bases,
moisture.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 513-88-2: UC1428000
LD50/LC50:
CAS# 513-88-2: Oral, mouse: LD50 = 250 mg/kg.
Oral, mouse: LD50 = 250 mg/kg.; Oral, rat: TDLo = 3600
Carcinogenicity:
1,1-Dichloroacetone -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 10 Flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 7 Keep container tightly closed.
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 513-88-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 513-88-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 513-88-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/02/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Butylbenzaldehyde, 98% (GC) 1200-14-2
Propionamide, 97% 79-05-0
4-Nitrobenzenesulfonamide, 97% 6325-93-5
1,1-Dichloroacetone, 98% 513-88-2
N,N-Dimethyltrimethylsilylamine, 97% 2083-91-2
3,6-Bis(2-Hydroxyethyl)-2,5-Diketopiperazine, 98% 50975-79-6
Hexacosanoic Acid, 98% (GC) 506-46-7
S-Benzyl-L-Cysteine, 99% 3054-01-1
Selenium, powder, 99.5+%, 200 mesh 7782-49-2
N-Ethyl-5-phenylisoxazolium-3'-sulfonate, 95% 4156-16-5
Zirconium(IV) chloride, anhydrous, 98% 10026-11-6
Ethyl Malonyl Chloride, Tech., 90+% (titr.) 36239-09-5
Saccharin, sodium salt hydrate, 99+% 82385-42-0
3,4-Dichloronitrobenzene, 95% 99-54-7
Aq 38s
Allyl isothiocyanate, 94% 57-06-7
Phenanthrenequinone 95% 84-11-7
5-Fluoro-2-methylaniline, 99% 367-29-3
Magnesium Methyl Carbonate (1.8 M in DMF) 68-12-2
2-Chloro-3(Trifluoromethyl)Pyridine, 98+% 65753-47-1
5-Aminoindan, 96% 24425-40-9
R-(-)-1-Octen-3-Ol, 99% 3687-48-7
Germanium, Pieces, Irregular, 99.999% 7440-56-4
Di-Tert-Butyl Malonate 541-16-2
Adonitol, 99+% 488-81-3
Potassium perrhenate(vii), 99% 10466-65-6
Dl-norphenylephrine hydrochloride, 98% 15308-34-6
4-(4-Chlorophenyl)-4-hydroxypiperidine, 99 +%, crystalline 39512-49-7
1,5-Dihydroxynaphthalene, 99% 83-56-7
2,2-Diethoxyacetamide, 99% 61189-99-9
2,5-Dimethylpyrrolidine, 98%, Cis/Trans Mixture 3378-71-0
(S)-(+)-1,2-Propanediol, 99% 57-55-6
Harmane,98% 486-84-0
4,6-Dimethylpyrimidine, Tech., 93+% 1558-17-4
Diethylaluminum ethoxide, 25 wt% solution in toluene 108-88-3
Ethyl L-Lactate, 97% (GC) 687-47-8
5-Nitroisatin, 97% 611-09-6
3,5-Dihydroxybenzoic Acid, 97% 99-10-5
2-Acetylaminothiazole 2719-23-5
L-Tyrosine Methyl Ester, 98% 1080-06-4
n-Butyl propionate, 99+% 590-01-2
4-Methyl-3-Nitrobenzyl Chloride, 99% 84540-59-0
Methyl 4-Formylbenzoate Dimethyl Acetal, 95.7+% (GC) 42228-16-0
Ethyl palmitate, 98% 628-97-7
Hesperidin,97% 520-26-3
N,N'-bis(p-methoxybenzylidene)-alpha, alpha'-bi-p-toluidine, 99% 55290-05-6
6,7-Dihydroxy-3,4-Dihydroisoquinoline, 98% 4602-83-9
Benzoaza-15-crown-5, 99% 0-01-0
M-Hydroxycinnamic Acid, 99%, Predominantly Trans 14755-02-3
2,5-Dimethoxy-2,5-Dihydrofuran,99%,Cis/Trans Mixture 332-77-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net