Search   
MSDS 
:
 N,N-Dimethylallylamine, 98% (GC)
CAS 
:
 2155-94-4
SYNONYMS 
:
 2-Propen-1-Amine, N,N-Dimethyl-.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2155-94-4 |2-Propen-1-Amine, N,N-Dimethyl- | 98 | 218-458-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN F
Risk Phrases: 11 20/21/22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation, in contact with skin and if
swallowed. Irritating to eyes, respiratory system and skin.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. Ingestion of large amounts may cause CNS depression. May
cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. Vapors may cause dizziness or suffocation. May
cause systemic effects. Can produce delayed pulmonary edema. May
cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Remove contaminated clothing and wash before reuse. Ground and bond
containers when transferring material. Use spark-proof tools and
explosion proof equipment. Do not breathe dust, vapor, mist, or gas.
Do not get in eyes, on skin, or on clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame. Do
not ingest or inhale. Use with adequate ventilation. Discard
contaminated shoes. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Refrigerator/flammables.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 2155-94-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear colorless to faint yellow
Odor: amine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 62 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 8 deg C ( 46.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .7410g/cm3
Molecular Formula: C5H11N
Molecular Weight: 85.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2155-94-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Propen-1-Amine, N,N-Dimethyl- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.*
Hazard Class: 3 (8)
UN Number: 2733
Packing Group: II
IMO
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3.2 (8)
UN Number: 2733
Packing Group: II
RID/ADR
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2733
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 11 Highly flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 2155-94-4: No information available.
Canada
CAS# 2155-94-4 is listed on Canada's NDSL List.
CAS# 2155-94-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2155-94-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Formaldehyde sodium bisulfite addition compound, 95% 870-72-4
1-(1'-Methylethyl)-4-piperidone, 99% 5355-68-0
1,4-Diaminobutane Dihydrochloride, 99+% 333-93-7
(+)-Diisopropyl l-tartrate, 99% 2217-15-4
Europium atomic absorption standard solution, 1 mg/ml Eu in 2% HNO3 7440-53-1
Silver (I) sulfide, 99.9% 21548-73-2
1-Benzyl-3-Methyl-4-Piperidone, 99% 34737-89-8
4-Nitrobenzyl chloride, 98% (hplc) 100-14-1
2,6-Dichlorotoluene, 99+% 118-69-4
N,N-Dimethylallylamine, 98% (GC) 2155-94-4
2-(2-Aminoethylamino)-5-Nitropyridine, 98% 29602-39-9
alpha,alpha'-Dichloro-p-xylene, 98% 623-25-6
3-Nitrobenzenesulfonic acid monohydrate, 95% (titr.) 5337-19-9
2-(Chloromethyl)-quinoline hydrochloride 97% 3747-74-8
4-Chloro-2-Fluorobenzylamine Hydrochloride 94% (Titr.) 0-00-1
3-Chlorobenzylbromide, 98+% 766-80-3
alpha-(Chloromethyl)-2,4-dichlorobenzyl alcohol, 98% 13692-14-3
4,4'-Bis(dimethylamino)benzil 17078-27-2
(S)-(+)-2-Aminobutane, 98% 513-49-5
Trioctanoin, 98% (gc) 538-23-8
(2R,3R)-1,4-Di-O-Tosyl-2,3-O-Isopropylidene-D-Threitol, 99+% 51064-65-4
Ethyl 2-Hydroxyisobutyrate, 99% 80-55-7
D-(-)-Leucinol, 97% (97+% e.e.) 53448-09-2
gamma-(4-Fluorophenyl)-gamma-butyrolactone 98% 51787-96-3
4-Aminobenzotrifluoride, 99% 455-14-1
2-Iodoanisole, 97% 529-28-2
3,5-Dibromosalicylaldehyde, 98% 90-59-5
Hydrocinnamonitrile, 99+% 645-59-0
Crotonylchloride, Tech., 90% 7732-18-5
N,n'-diphenyl-p-phenylenediamine (pract), 97% (titr.) 74-31-7
Methyl (z)-2-benzoylamino-3-dimethylaminopropenoate, 98% 56952-04-6
1,2-Phenylenediacetic acid, 99% 7500-53-0
6-Fluoro-1,2,3,4-Tetrahydro-2-Methyl-Quinoline, 98% 42835-89-2
4-Ethoxycarbonyloxy-3,5-dimethoxybenzoic acid, 96% 18780-67-1
Palmitic Acid 57-10-3
2-Methylbenzselenazole, 99% 2818-88-4
Octanophenone, 99+% 1674-37-9
Samarium(iii) oxide, 99.9% 12060-58-1
Cholesteryl benzoate, 98% 604-32-0
5-Thio-d-glucose, predominantly alpha-anomer 20408-97-3
Trichloromethanesulfonyl Chloride (Pract) 2547-61-7
4,4'-Bis(Heptyloxy)Azoxybenzene 2635-26-9
2-(P-Tolyl)Pyridine, 94% (GC) 4467-06-5
3,3'-Dithiodipropionic Acid, 99% 1119-62-6
n-Butyllithium, 2.5M solution in hexanes 109-72-8
2-Hydroxy-9-fluorenone, 97% 6949-73-1
(S)-Ethyl 2-Pyrrolidone-5-Carboxylate, 99% 7149-65-7
Copper chromite, catalyst 12018-10-9
1-Cyclopenteneacetonitrile, 95% 22734-04-9
Triisopropanolamine,98% 122-20-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net