**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2547-61-7 |Methanesulfonyl Chloride, Trichloro- | ca 100 | 219-830-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 26/27/28
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Very toxic by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2547-61-7:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystals
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 138.00 - 140.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: CCl4O2S
Molecular Weight: 217.89
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 2547-61-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methanesulfonyl Chloride, Trichloro- -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 26/27/28 Very toxic by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 1 Keep locked up.
S 13 Keep away from food, drink and animal feeding
stuffs.
S 28 After contact with skin, wash immediately
with...
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2547-61-7: No information available.
Canada
CAS# 2547-61-7 is listed on Canada's NDSL List.
CAS# 2547-61-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2547-61-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/28/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Formaldehyde sodium bisulfite addition compound, 95%
| 870-72-4 |
|
1-(1'-Methylethyl)-4-piperidone, 99%
| 5355-68-0 |
|
1,4-Diaminobutane Dihydrochloride, 99+%
| 333-93-7 |
|
(+)-Diisopropyl l-tartrate, 99%
| 2217-15-4 |
|
Europium atomic absorption standard solution, 1 mg/ml Eu in 2% HNO3
| 7440-53-1 |
|
Silver (I) sulfide, 99.9%
| 21548-73-2 |
|
1-Benzyl-3-Methyl-4-Piperidone, 99%
| 34737-89-8 |
|
4-Nitrobenzyl chloride, 98% (hplc)
| 100-14-1 |
|
2,6-Dichlorotoluene, 99+%
| 118-69-4 |
|
N,N-Dimethylallylamine, 98% (GC)
| 2155-94-4 |
|
2-(2-Aminoethylamino)-5-Nitropyridine, 98%
| 29602-39-9 |
|
alpha,alpha'-Dichloro-p-xylene, 98%
| 623-25-6 |
|
3-Nitrobenzenesulfonic acid monohydrate, 95% (titr.)
| 5337-19-9 |
|
2-(Chloromethyl)-quinoline hydrochloride 97%
| 3747-74-8 |
|
4-Chloro-2-Fluorobenzylamine Hydrochloride 94% (Titr.)
| 0-00-1 |
|
3-Chlorobenzylbromide, 98+%
| 766-80-3 |
|
alpha-(Chloromethyl)-2,4-dichlorobenzyl alcohol, 98%
| 13692-14-3 |
|
4,4'-Bis(dimethylamino)benzil
| 17078-27-2 |
|
(S)-(+)-2-Aminobutane, 98%
| 513-49-5 |
|
Trioctanoin, 98% (gc)
| 538-23-8 |
|
(2R,3R)-1,4-Di-O-Tosyl-2,3-O-Isopropylidene-D-Threitol, 99+%
| 51064-65-4 |
|
Ethyl 2-Hydroxyisobutyrate, 99%
| 80-55-7 |
|
D-(-)-Leucinol, 97% (97+% e.e.)
| 53448-09-2 |
|
gamma-(4-Fluorophenyl)-gamma-butyrolactone 98%
| 51787-96-3 |
|
4-Aminobenzotrifluoride, 99%
| 455-14-1 |
|
2-Iodoanisole, 97%
| 529-28-2 |
|
3,5-Dibromosalicylaldehyde, 98%
| 90-59-5 |
|
Hydrocinnamonitrile, 99+%
| 645-59-0 |
|
Crotonylchloride, Tech., 90%
| 7732-18-5 |
|
N,n'-diphenyl-p-phenylenediamine (pract), 97% (titr.)
| 74-31-7 |
|
Methyl (z)-2-benzoylamino-3-dimethylaminopropenoate, 98%
| 56952-04-6 |
|
1,2-Phenylenediacetic acid, 99%
| 7500-53-0 |
|
6-Fluoro-1,2,3,4-Tetrahydro-2-Methyl-Quinoline, 98%
| 42835-89-2 |
|
4-Ethoxycarbonyloxy-3,5-dimethoxybenzoic acid, 96%
| 18780-67-1 |
|
Palmitic Acid
| 57-10-3 |
|
2-Methylbenzselenazole, 99%
| 2818-88-4 |
|
Octanophenone, 99+%
| 1674-37-9 |
|
Samarium(iii) oxide, 99.9%
| 12060-58-1 |
|
Cholesteryl benzoate, 98%
| 604-32-0 |
|
5-Thio-d-glucose, predominantly alpha-anomer
| 20408-97-3 |
|
Trichloromethanesulfonyl Chloride (Pract)
| 2547-61-7 |
|
4,4'-Bis(Heptyloxy)Azoxybenzene
| 2635-26-9 |
|
2-(P-Tolyl)Pyridine, 94% (GC)
| 4467-06-5 |
|
3,3'-Dithiodipropionic Acid, 99%
| 1119-62-6 |
|
n-Butyllithium, 2.5M solution in hexanes
| 109-72-8 |
|
2-Hydroxy-9-fluorenone, 97%
| 6949-73-1 |
|
(S)-Ethyl 2-Pyrrolidone-5-Carboxylate, 99%
| 7149-65-7 |
|
Copper chromite, catalyst
| 12018-10-9 |
|
1-Cyclopenteneacetonitrile, 95%
| 22734-04-9 |
|
Triisopropanolamine,98%
| 122-20-3 |
|
|