Search   
MSDS 
:
 1-(1'-Methylethyl)-4-piperidone, 99%
CAS 
:
 5355-68-0
SYNONYMS 
:
 1-Isopropyl-4-piperidone
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5355-68-0 |1-(1'-Methylethyl)-4-piperidone | 95% | 226-339-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Causes eye irritation. Vapors cause eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Vapor or mist is irritating to the mucous membranes and upper
respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5355-68-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow to brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 100.0 - 101.0 deg C @ 27.00mm
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9500g/cm3
Molecular Formula: C8H15NO
Molecular Weight: 141.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5355-68-0 unlisted.
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
1-(1'-Methylethyl)-4-piperidone -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 5355-68-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5355-68-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5355-68-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/26/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Formaldehyde sodium bisulfite addition compound, 95% 870-72-4
1-(1'-Methylethyl)-4-piperidone, 99% 5355-68-0
1,4-Diaminobutane Dihydrochloride, 99+% 333-93-7
(+)-Diisopropyl l-tartrate, 99% 2217-15-4
Europium atomic absorption standard solution, 1 mg/ml Eu in 2% HNO3 7440-53-1
Silver (I) sulfide, 99.9% 21548-73-2
1-Benzyl-3-Methyl-4-Piperidone, 99% 34737-89-8
4-Nitrobenzyl chloride, 98% (hplc) 100-14-1
2,6-Dichlorotoluene, 99+% 118-69-4
N,N-Dimethylallylamine, 98% (GC) 2155-94-4
2-(2-Aminoethylamino)-5-Nitropyridine, 98% 29602-39-9
alpha,alpha'-Dichloro-p-xylene, 98% 623-25-6
3-Nitrobenzenesulfonic acid monohydrate, 95% (titr.) 5337-19-9
2-(Chloromethyl)-quinoline hydrochloride 97% 3747-74-8
4-Chloro-2-Fluorobenzylamine Hydrochloride 94% (Titr.) 0-00-1
3-Chlorobenzylbromide, 98+% 766-80-3
alpha-(Chloromethyl)-2,4-dichlorobenzyl alcohol, 98% 13692-14-3
4,4'-Bis(dimethylamino)benzil 17078-27-2
(S)-(+)-2-Aminobutane, 98% 513-49-5
Trioctanoin, 98% (gc) 538-23-8
(2R,3R)-1,4-Di-O-Tosyl-2,3-O-Isopropylidene-D-Threitol, 99+% 51064-65-4
Ethyl 2-Hydroxyisobutyrate, 99% 80-55-7
D-(-)-Leucinol, 97% (97+% e.e.) 53448-09-2
gamma-(4-Fluorophenyl)-gamma-butyrolactone 98% 51787-96-3
4-Aminobenzotrifluoride, 99% 455-14-1
2-Iodoanisole, 97% 529-28-2
3,5-Dibromosalicylaldehyde, 98% 90-59-5
Hydrocinnamonitrile, 99+% 645-59-0
Crotonylchloride, Tech., 90% 7732-18-5
N,n'-diphenyl-p-phenylenediamine (pract), 97% (titr.) 74-31-7
Methyl (z)-2-benzoylamino-3-dimethylaminopropenoate, 98% 56952-04-6
1,2-Phenylenediacetic acid, 99% 7500-53-0
6-Fluoro-1,2,3,4-Tetrahydro-2-Methyl-Quinoline, 98% 42835-89-2
4-Ethoxycarbonyloxy-3,5-dimethoxybenzoic acid, 96% 18780-67-1
Palmitic Acid 57-10-3
2-Methylbenzselenazole, 99% 2818-88-4
Octanophenone, 99+% 1674-37-9
Samarium(iii) oxide, 99.9% 12060-58-1
Cholesteryl benzoate, 98% 604-32-0
5-Thio-d-glucose, predominantly alpha-anomer 20408-97-3
Trichloromethanesulfonyl Chloride (Pract) 2547-61-7
4,4'-Bis(Heptyloxy)Azoxybenzene 2635-26-9
2-(P-Tolyl)Pyridine, 94% (GC) 4467-06-5
3,3'-Dithiodipropionic Acid, 99% 1119-62-6
n-Butyllithium, 2.5M solution in hexanes 109-72-8
2-Hydroxy-9-fluorenone, 97% 6949-73-1
(S)-Ethyl 2-Pyrrolidone-5-Carboxylate, 99% 7149-65-7
Copper chromite, catalyst 12018-10-9
1-Cyclopenteneacetonitrile, 95% 22734-04-9
Triisopropanolamine,98% 122-20-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net