Search   
MSDS 
:
 (S)-(+)-2-Aminobutane, 98%
CAS 
:
 513-49-5
SYNONYMS 
:
 Sec-Butylamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 513-49-5 |Sec-Butylamine | 98 | 208-164-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C N
Risk Phrases: 11 20/22 35 50

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation and if swallowed. Causes
severe burns. Very toxic to aquatic organisms.Light sensitive.Air
sensitive.Corrosive.Dangerous for the environment.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
Harmful if swallowed. May cause severe and permanent damage to the
digestive tract. May cause gastrointestinal irritation with nausea,
vomiting and diarrhea. Causes gastrointestinal tract burns. May cause
perforation of the digestive tract. Ingestion of large amounts may
cause CNS depression. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. Vapors may cause dizziness or suffocation. May
cause systemic effects. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Use agent most appropriate to
extinguish fire. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.
Place under an inert atmosphere. A vapor suppressing foam may be used
to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Store
protected from light. Handle under an inert atmosphere. Store
protected from air. Discard contaminated shoes. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers
to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a cool,
dry, well-ventilated area away from incompatible substances.
Flammables-area. Do not expose to air. Store protected from light.
Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 513-49-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: amine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 61 - 62 deg C @ 760.00mm Hg
Freezing/Melting Point: -104 deg C
Autoignition Temperature: 290 deg C ( 554.00 deg F)
Flash Point: -19 deg C ( -2.20 deg F)
Explosion Limits, lower: 1.80 vol %
Explosion Limits, upper: 9.00 vol %
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .7240g/cm3
Molecular Formula: C4H11N
Molecular Weight: 73.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, ignition sources, exposure to air,
excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, carbon dioxide, acid anhydrides, acid
chlorides, air.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 513-49-5: EO3327000
LD50/LC50:
CAS# 513-49-5: Oral, rat: LD50 = 380 mg/kg; Skin, rabbit: LD50 =
2500 mg/kg.
Carcinogenicity:
Sec-Butylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.*
Hazard Class: 3
UN Number: 2733
Packing Group: II
IMO
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3.1
UN Number: 2733
Packing Group: II
RID/ADR
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2733
Packing group: II
USA RQ: CAS# 513-49-5: 1000 lb final RQ (Listed under Butylamine); 454 kg final

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C N
Risk Phrases:
R 11 Highly flammable.
R 20/22 Harmful by inhalation and if swallowed.
R 35 Causes severe burns.
R 50 Very toxic to aquatic organisms.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 513-49-5: No information available.
Canada
CAS# 513-49-5 is listed on Canada's NDSL List.
CAS# 513-49-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 513-49-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Formaldehyde sodium bisulfite addition compound, 95% 870-72-4
1-(1'-Methylethyl)-4-piperidone, 99% 5355-68-0
1,4-Diaminobutane Dihydrochloride, 99+% 333-93-7
(+)-Diisopropyl l-tartrate, 99% 2217-15-4
Europium atomic absorption standard solution, 1 mg/ml Eu in 2% HNO3 7440-53-1
Silver (I) sulfide, 99.9% 21548-73-2
1-Benzyl-3-Methyl-4-Piperidone, 99% 34737-89-8
4-Nitrobenzyl chloride, 98% (hplc) 100-14-1
2,6-Dichlorotoluene, 99+% 118-69-4
N,N-Dimethylallylamine, 98% (GC) 2155-94-4
2-(2-Aminoethylamino)-5-Nitropyridine, 98% 29602-39-9
alpha,alpha'-Dichloro-p-xylene, 98% 623-25-6
3-Nitrobenzenesulfonic acid monohydrate, 95% (titr.) 5337-19-9
2-(Chloromethyl)-quinoline hydrochloride 97% 3747-74-8
4-Chloro-2-Fluorobenzylamine Hydrochloride 94% (Titr.) 0-00-1
3-Chlorobenzylbromide, 98+% 766-80-3
alpha-(Chloromethyl)-2,4-dichlorobenzyl alcohol, 98% 13692-14-3
4,4'-Bis(dimethylamino)benzil 17078-27-2
(S)-(+)-2-Aminobutane, 98% 513-49-5
Trioctanoin, 98% (gc) 538-23-8
(2R,3R)-1,4-Di-O-Tosyl-2,3-O-Isopropylidene-D-Threitol, 99+% 51064-65-4
Ethyl 2-Hydroxyisobutyrate, 99% 80-55-7
D-(-)-Leucinol, 97% (97+% e.e.) 53448-09-2
gamma-(4-Fluorophenyl)-gamma-butyrolactone 98% 51787-96-3
4-Aminobenzotrifluoride, 99% 455-14-1
2-Iodoanisole, 97% 529-28-2
3,5-Dibromosalicylaldehyde, 98% 90-59-5
Hydrocinnamonitrile, 99+% 645-59-0
Crotonylchloride, Tech., 90% 7732-18-5
N,n'-diphenyl-p-phenylenediamine (pract), 97% (titr.) 74-31-7
Methyl (z)-2-benzoylamino-3-dimethylaminopropenoate, 98% 56952-04-6
1,2-Phenylenediacetic acid, 99% 7500-53-0
6-Fluoro-1,2,3,4-Tetrahydro-2-Methyl-Quinoline, 98% 42835-89-2
4-Ethoxycarbonyloxy-3,5-dimethoxybenzoic acid, 96% 18780-67-1
Palmitic Acid 57-10-3
2-Methylbenzselenazole, 99% 2818-88-4
Octanophenone, 99+% 1674-37-9
Samarium(iii) oxide, 99.9% 12060-58-1
Cholesteryl benzoate, 98% 604-32-0
5-Thio-d-glucose, predominantly alpha-anomer 20408-97-3
Trichloromethanesulfonyl Chloride (Pract) 2547-61-7
4,4'-Bis(Heptyloxy)Azoxybenzene 2635-26-9
2-(P-Tolyl)Pyridine, 94% (GC) 4467-06-5
3,3'-Dithiodipropionic Acid, 99% 1119-62-6
n-Butyllithium, 2.5M solution in hexanes 109-72-8
2-Hydroxy-9-fluorenone, 97% 6949-73-1
(S)-Ethyl 2-Pyrrolidone-5-Carboxylate, 99% 7149-65-7
Copper chromite, catalyst 12018-10-9
1-Cyclopenteneacetonitrile, 95% 22734-04-9
Triisopropanolamine,98% 122-20-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net