Search   
MSDS 
:
 Aniline blue, water soluble, high purity biological stain
CAS 
:
 28631-66-5
SYNONYMS 
:
 Calcoid Blue B; Acid Blue R; China Blue, Ink Blue A
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 28631-66-5 |C.I. Acid Blue 22 | 100 | 249-113-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation. This product contains an anionic dye.
Similar dyes have not caused injury to the cornea or conjunctiva in
documented exposure cases with human or rabbit eyes.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Prolonged or repeated skin contact may cause irritation. May cause
methemoglobinemia, which is characterized by chocolate-brown colored
blood, headache, weakness, dizziness, breath shortness, cyanosis
(bluish skin due to deficient oxygenation of blood), rapid heart
rate, unconsciousness and possible death.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 28631-66-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: dark purple
Odor: Odorless.
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C32H25N3O9S3Na2
Molecular Weight: 737.71

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide,
nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 28631-66-5: DB4958000
LD50/LC50:
Not available.
Carcinogenicity:
C.I. Acid Blue 22 -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 28631-66-5: No information available.
Canada
CAS# 28631-66-5 is listed on Canada's DSL List.
CAS# 28631-66-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 28631-66-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 8/06/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Zinc, Granular, 20 Mesh, P.A. 7440-66-6
Zinc, Granular, 30 Mesh, P.A. 7440-66-6
Zinc, Dust (Pract) 7440-66-6
Beta-Ionone, Synthetic, 98% 14901-07-6
Beta-Ionone, 96% (Titr.) 14901-07-6
Allyl Alcohol, 99% 107-18-6
3,3'-Dimethoxybenzidine dihydrochloride, 99% 20325-40-0
Pyridoxine Hydrochloride, 99.0-101.0% (Dry Substance) 58-56-0
4-Nitrophenyl Chloroformate, 97% 7693-46-1
Methyl Oleate 112-62-9
Ethyl iodoacetate, 98% 623-48-3
2-Hydroxyisobutyric acid, 98% 594-61-6
Basic Fuchsin (Cert) 632-99-5
Ethylene/vinyl acetate copolymer 14% vinyl acetate 24937-78-8
Methacrolein, 90-95%(GC), stabilized with hydroquinone 78-85-3
Ethylene/vinyl acetate copolymer 25% vinyl acetate, average 24937-78-8
Ethylene/vinyl acetate copolymer 28% vinyl acetate, avge.m.w.285.000 24937-78-8
Ethylene/vinyl acetate copolymer, pellets, avr. m.w.110000, stab. 24937-78-8
Ammonium sulfobetaine - 1
2-Aminopyridine 504-29-0
D,L-Buthionine, 97% 3343-64-4
2-Chloroethanol, 99% 107-07-3
Resazurin, sodium salt, high purity biological stain 62758-13-8
Phenyl isocyanate, 99% 103-71-9
Triethanolamine hydrochloride, p.a. 637-39-8
Allyl Chloride, 98% 107-05-1
2-Hydroxyethyl methacrylate, 96%, stabilized with 200-400 ppm MEHQ 150-76-5
Poly(ethylene), low density, average m.w.50000 9002-88-4
Tributylborane, 1M solution in THF 109-99-9
Polysulfone Resin. Nominal M.W. 75000, (GPC) , Pellets 25135-51-7
4-Chlorophenol, 98% 106-48-9
4-Chlorophenol (Pract) 106-48-9
Trichloroacetonitrile, 98% 545-06-2
3-Diethylamino-1-propanol, 97% 622-93-5
1,6-Hexanediol, 99% -Total C6-Diols 629-11-8
Fullerene c60, 99.9+% (hplc) 99685-96-8
Fullerene c-60 99685-96-8
1H-Tetrazole, 98% 288-94-8
1,2,3,4-Tetrahydro-6,7-isoquinolinediol hy drobromide, 98% 52768-23-7
3,4-Dimethylphenylhydrazine Hydrochloride, 98% 60481-51-8
Ethyl p-toluenesulfonate, 98% 80-40-0
Dl-mandelic acid, 98+% 611-72-3
Phenanthrene, 98+% 85-01-8
Phenanthrene, fluorescent grade, 98% (uv-vis) 85-01-8
Dipropyl adipate 106-19-4
Aniline blue, water soluble, high purity biological stain 28631-66-5
L(-)-Malic acid, 99% 97-67-6
Bromothymol blue, water soluble indicator 34722-90-2
Bromocresol Green, Water Soluble, Indicator 67763-24-0
Bromophenol Blue Indicator 115-39-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net