Search   
MSDS 
:
 Bromocresol Green, Water Soluble, Indicator
CAS 
:
 67763-24-0
SYNONYMS 
:
 4,4'-(3H-1,2-Benzoxathiol-3-Yliden)Bis(2,6-Dibromo-3-Methylphenol     S,S-Dioxide Monodosium Salt.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 67763-24-0 |Bromocresol Green, Water Soluble, Indi| 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Dust may cause mechanical irritation. This product contains an
anionic dye. Similar dyes have not caused injury to the cornea or
conjunctiva in documented exposure cases with human or rabbit eyes.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Wash clothing
before reuse. Flush skin with plenty of soap and water.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use extinguishing media appropriate to the
surrounding fire. Substance is noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with skin
and eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 67763-24-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: brown
Odor: none reported
pH: Not available.
Vapor Pressure: Not applicable.
Viscosity: Not applicable.
Boiling Point: Not applicable.
Freezing/Melting Point: decomposes
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 230 deg C
Solubility in water: soluble in water
Specific Gravity/Density: Not available.
Molecular Formula: C21H13Br4O5SNa
Molecular Weight: 719.7538

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 67763-24-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Bromocresol Green, Water Soluble, Indicator -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 67763-24-0: No information available.
Canada
CAS# 67763-24-0 is listed on Canada's NDSL List.
CAS# 67763-24-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 67763-24-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Zinc, Granular, 20 Mesh, P.A. 7440-66-6
Zinc, Granular, 30 Mesh, P.A. 7440-66-6
Zinc, Dust (Pract) 7440-66-6
Beta-Ionone, Synthetic, 98% 14901-07-6
Beta-Ionone, 96% (Titr.) 14901-07-6
Allyl Alcohol, 99% 107-18-6
3,3'-Dimethoxybenzidine dihydrochloride, 99% 20325-40-0
Pyridoxine Hydrochloride, 99.0-101.0% (Dry Substance) 58-56-0
4-Nitrophenyl Chloroformate, 97% 7693-46-1
Methyl Oleate 112-62-9
Ethyl iodoacetate, 98% 623-48-3
2-Hydroxyisobutyric acid, 98% 594-61-6
Basic Fuchsin (Cert) 632-99-5
Ethylene/vinyl acetate copolymer 14% vinyl acetate 24937-78-8
Methacrolein, 90-95%(GC), stabilized with hydroquinone 78-85-3
Ethylene/vinyl acetate copolymer 25% vinyl acetate, average 24937-78-8
Ethylene/vinyl acetate copolymer 28% vinyl acetate, avge.m.w.285.000 24937-78-8
Ethylene/vinyl acetate copolymer, pellets, avr. m.w.110000, stab. 24937-78-8
Ammonium sulfobetaine - 1
2-Aminopyridine 504-29-0
D,L-Buthionine, 97% 3343-64-4
2-Chloroethanol, 99% 107-07-3
Resazurin, sodium salt, high purity biological stain 62758-13-8
Phenyl isocyanate, 99% 103-71-9
Triethanolamine hydrochloride, p.a. 637-39-8
Allyl Chloride, 98% 107-05-1
2-Hydroxyethyl methacrylate, 96%, stabilized with 200-400 ppm MEHQ 150-76-5
Poly(ethylene), low density, average m.w.50000 9002-88-4
Tributylborane, 1M solution in THF 109-99-9
Polysulfone Resin. Nominal M.W. 75000, (GPC) , Pellets 25135-51-7
4-Chlorophenol, 98% 106-48-9
4-Chlorophenol (Pract) 106-48-9
Trichloroacetonitrile, 98% 545-06-2
3-Diethylamino-1-propanol, 97% 622-93-5
1,6-Hexanediol, 99% -Total C6-Diols 629-11-8
Fullerene c60, 99.9+% (hplc) 99685-96-8
Fullerene c-60 99685-96-8
1H-Tetrazole, 98% 288-94-8
1,2,3,4-Tetrahydro-6,7-isoquinolinediol hy drobromide, 98% 52768-23-7
3,4-Dimethylphenylhydrazine Hydrochloride, 98% 60481-51-8
Ethyl p-toluenesulfonate, 98% 80-40-0
Dl-mandelic acid, 98+% 611-72-3
Phenanthrene, 98+% 85-01-8
Phenanthrene, fluorescent grade, 98% (uv-vis) 85-01-8
Dipropyl adipate 106-19-4
Aniline blue, water soluble, high purity biological stain 28631-66-5
L(-)-Malic acid, 99% 97-67-6
Bromothymol blue, water soluble indicator 34722-90-2
Bromocresol Green, Water Soluble, Indicator 67763-24-0
Bromophenol Blue Indicator 115-39-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net