Search   
MSDS 
:
 L(-)-Malic acid, 99%
CAS 
:
 97-67-6
SYNONYMS 
:
 L-Hydroxysuccinic acid; Hydroxybutanedioic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 97-67-6 |L-(-)-Malic acid | 99 | 202-601-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and
skin.

Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
Causes moderate skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid breathing dust.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 97-67-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 99-107 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 150 deg C
Solubility in water: Soluble.
Specific Gravity/Density: 1.6
Molecular Formula: C4H6O5
Molecular Weight: 134.09

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Metals, strong oxidizing agents, strong reducing agents, strong
bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 97-67-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
L-(-)-Malic acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
WGK (Water Danger/Protection)
CAS# 97-67-6: No information available.
Canada
CAS# 97-67-6 is listed on Canada's DSL List.
CAS# 97-67-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 97-67-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/23/1998 Revision #4 Date: 5/08/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Zinc, Granular, 20 Mesh, P.A. 7440-66-6
Zinc, Granular, 30 Mesh, P.A. 7440-66-6
Zinc, Dust (Pract) 7440-66-6
Beta-Ionone, Synthetic, 98% 14901-07-6
Beta-Ionone, 96% (Titr.) 14901-07-6
Allyl Alcohol, 99% 107-18-6
3,3'-Dimethoxybenzidine dihydrochloride, 99% 20325-40-0
Pyridoxine Hydrochloride, 99.0-101.0% (Dry Substance) 58-56-0
4-Nitrophenyl Chloroformate, 97% 7693-46-1
Methyl Oleate 112-62-9
Ethyl iodoacetate, 98% 623-48-3
2-Hydroxyisobutyric acid, 98% 594-61-6
Basic Fuchsin (Cert) 632-99-5
Ethylene/vinyl acetate copolymer 14% vinyl acetate 24937-78-8
Methacrolein, 90-95%(GC), stabilized with hydroquinone 78-85-3
Ethylene/vinyl acetate copolymer 25% vinyl acetate, average 24937-78-8
Ethylene/vinyl acetate copolymer 28% vinyl acetate, avge.m.w.285.000 24937-78-8
Ethylene/vinyl acetate copolymer, pellets, avr. m.w.110000, stab. 24937-78-8
Ammonium sulfobetaine - 1
2-Aminopyridine 504-29-0
D,L-Buthionine, 97% 3343-64-4
2-Chloroethanol, 99% 107-07-3
Resazurin, sodium salt, high purity biological stain 62758-13-8
Phenyl isocyanate, 99% 103-71-9
Triethanolamine hydrochloride, p.a. 637-39-8
Allyl Chloride, 98% 107-05-1
2-Hydroxyethyl methacrylate, 96%, stabilized with 200-400 ppm MEHQ 150-76-5
Poly(ethylene), low density, average m.w.50000 9002-88-4
Tributylborane, 1M solution in THF 109-99-9
Polysulfone Resin. Nominal M.W. 75000, (GPC) , Pellets 25135-51-7
4-Chlorophenol, 98% 106-48-9
4-Chlorophenol (Pract) 106-48-9
Trichloroacetonitrile, 98% 545-06-2
3-Diethylamino-1-propanol, 97% 622-93-5
1,6-Hexanediol, 99% -Total C6-Diols 629-11-8
Fullerene c60, 99.9+% (hplc) 99685-96-8
Fullerene c-60 99685-96-8
1H-Tetrazole, 98% 288-94-8
1,2,3,4-Tetrahydro-6,7-isoquinolinediol hy drobromide, 98% 52768-23-7
3,4-Dimethylphenylhydrazine Hydrochloride, 98% 60481-51-8
Ethyl p-toluenesulfonate, 98% 80-40-0
Dl-mandelic acid, 98+% 611-72-3
Phenanthrene, 98+% 85-01-8
Phenanthrene, fluorescent grade, 98% (uv-vis) 85-01-8
Dipropyl adipate 106-19-4
Aniline blue, water soluble, high purity biological stain 28631-66-5
L(-)-Malic acid, 99% 97-67-6
Bromothymol blue, water soluble indicator 34722-90-2
Bromocresol Green, Water Soluble, Indicator 67763-24-0
Bromophenol Blue Indicator 115-39-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net