Search   
MSDS 
:
 Trifluoromethane Sulfonic Anhydride
CAS 
:
 358-23-6
SYNONYMS 
:
 Triflic anhydride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 358-23-6 |Trifluoromethane Sulfonic Anhydride | 100.0 | 206-616-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 14 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Reacts violently with water. Causes burns.Corrosive.Water-reactive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Water Reactive. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined
areas. Containers may explode when heated.
Extinguishing Media:
Do NOT use water directly on fire. Use dry chemical, carbon dioxide,
or alcohol-resistant foam. Cool containers with flooding quantities
of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Do not get water inside
containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Do
not get on skin or in eyes. Do not ingest or inhale. Use only in a
chemical fume hood. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Keep under a nitrogen blanket.
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep away from water. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 358-23-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 8 mm Hg @ 20 C
Viscosity: Not available.
Boiling Point: 82 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: decomposes
Specific Gravity/Density: 1.6770
Molecular Formula: C2 F6 O5 S2
Molecular Weight: 282.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture.
Incompatibilities with Other Materials:
Strong bases, strong oxidizing agents, acids, alcohols, moist air, or
water.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 358-23-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Trifluoromethane Sulfonic Anhydride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 358-23-6: No information available.
Canada
CAS# 358-23-6 is listed on Canada's NDSL List.
CAS# 358-23-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 358-23-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ammonia Solution (~0.88 specific gravity) 1336-21-6
Ammonia Solution (~0.91 specific gravity) 1336-21-6
Ammonia Buffer Solution 60-00-4
Ammonia Reagent 1 139-33-3
Ammonia Monitor First Reagent 139-33-3
Ammonium Benzoate 1863-63-4
Uracil 66-22-8
Ammonia Reagent 2 1310-73-2
Urease Tablets
Uric Acid 69-93-2
Isovaleric Acid 503-74-2
N-Valeric Acid 109-52-4
Ammonia Monitor Second Reagent 1310-73-2
Ammonia Monitor Reagent 637-39-8
Phenol Liquefied (80% Solution in water) 108-95-2
3-Chloro-1H-Indazole, 99% 29110-74-5
Phenolphthalein Solution 64-17-5
beta-Methylphenethylamine, 99% 582-22-9
Vanadium Pentoxide 1314-62-1
Vinyl Acetate Polymerised 9003-20-7
Beeswax 8012-89-3
Tris (Hydroxymethyl) Aminomethane Carbonate 68123-29-5
Triton Kaowool Ceramic Fibre 65997-17-3
Tungsten Metal Powder 7440-33-7
3Thermit 0-00-0
Thermit Ignition Powder 1304-29-6
Iso-Thiocyanato Benzene 103-72-0
Thioacetic Acid 507-09-5
2'-Hydroxypropiophenone, 97% 610-99-1
3,5-Dichlorophenylhydrazine Hydrochloride, 98.0% 63352-99-8
0.1M Trimethylanilinium hydroxide 67-56-1
Magnesium acetate 142-72-3
Mordant Blue 9 3624-68-8
Magnesium Carbonate 12125-28-9
Vanadyl Sulfate Solution 7664-93-9
Tri-n-hexylamine 102-86-3
Trifluoromethane Sulfonic Anhydride 358-23-6
Triethyl Orthoformate 122-51-0
N-Trifluoroacetylimidazole 1546-79-8
Trimethylanilinium hydroxide, 0.1M in methanol 67-56-1
3-Trimethoxysilyl-propyl-methacrylate 2530-85-0
Triethylammonium Chloride 554-68-7
Tridecafluoroheptanoic Acid 375-85-9
Tricaine Methane Sulfonate 886-86-2
Trichlorofluoromethane 75-69-4
o-Toluidine 95-53-4
p-Toluic Acid 99-94-5
o-Toluic Acid 118-90-1
Toluene-4-Sulfonyl Chloride 98-59-9
Tri-Aryl Phosphate Synthetic

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net