Search   
MSDS 
:
 beta-Methylphenethylamine, 99%
CAS 
:
 582-22-9
SYNONYMS 
:
 1-Amino-2-phenylpropane; 1-Phenyl-1-methyl-2-amino-aethan;     Phenyl-1-methyl-2-aminoethane; Phenethylamine, beta-methyl
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 582-22-9 |beta-Methylphenethylamine | 99 | 209-479-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation and possible burns. May cause chemical
conjunctivitis and corneal damage.
Skin:
Causes skin irritation and possible burns. May cause cyanosis of the
extremities.
Ingestion:
Causes digestive tract irritation with possible burns.
Inhalation:
Can produce delayed pulmonary edema. Causes respiratory tract
irritation with possible burns. Inhalation at high concentrations
may cause CNS depression and asphixiation.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Effects may
be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Combustible liquid. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Wash clothing before reuse. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 582-22-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 80 deg C @ 10.00 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 79 deg C ( 174.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.9300 g/cm3
Molecular Formula: C9H13N
Molecular Weight: 135.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Acid anhydrides, acid chlorides, acids, strong oxidizing agents,
carbon dioxide.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 582-22-9: SH9520000
LD50/LC50:
Not available.
Carcinogenicity:
beta-Methylphenethylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 582-22-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 582-22-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 582-22-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ammonia Solution (~0.88 specific gravity) 1336-21-6
Ammonia Solution (~0.91 specific gravity) 1336-21-6
Ammonia Buffer Solution 60-00-4
Ammonia Reagent 1 139-33-3
Ammonia Monitor First Reagent 139-33-3
Ammonium Benzoate 1863-63-4
Uracil 66-22-8
Ammonia Reagent 2 1310-73-2
Urease Tablets
Uric Acid 69-93-2
Isovaleric Acid 503-74-2
N-Valeric Acid 109-52-4
Ammonia Monitor Second Reagent 1310-73-2
Ammonia Monitor Reagent 637-39-8
Phenol Liquefied (80% Solution in water) 108-95-2
3-Chloro-1H-Indazole, 99% 29110-74-5
Phenolphthalein Solution 64-17-5
beta-Methylphenethylamine, 99% 582-22-9
Vanadium Pentoxide 1314-62-1
Vinyl Acetate Polymerised 9003-20-7
Beeswax 8012-89-3
Tris (Hydroxymethyl) Aminomethane Carbonate 68123-29-5
Triton Kaowool Ceramic Fibre 65997-17-3
Tungsten Metal Powder 7440-33-7
3Thermit 0-00-0
Thermit Ignition Powder 1304-29-6
Iso-Thiocyanato Benzene 103-72-0
Thioacetic Acid 507-09-5
2'-Hydroxypropiophenone, 97% 610-99-1
3,5-Dichlorophenylhydrazine Hydrochloride, 98.0% 63352-99-8
0.1M Trimethylanilinium hydroxide 67-56-1
Magnesium acetate 142-72-3
Mordant Blue 9 3624-68-8
Magnesium Carbonate 12125-28-9
Vanadyl Sulfate Solution 7664-93-9
Tri-n-hexylamine 102-86-3
Trifluoromethane Sulfonic Anhydride 358-23-6
Triethyl Orthoformate 122-51-0
N-Trifluoroacetylimidazole 1546-79-8
Trimethylanilinium hydroxide, 0.1M in methanol 67-56-1
3-Trimethoxysilyl-propyl-methacrylate 2530-85-0
Triethylammonium Chloride 554-68-7
Tridecafluoroheptanoic Acid 375-85-9
Tricaine Methane Sulfonate 886-86-2
Trichlorofluoromethane 75-69-4
o-Toluidine 95-53-4
p-Toluic Acid 99-94-5
o-Toluic Acid 118-90-1
Toluene-4-Sulfonyl Chloride 98-59-9
Tri-Aryl Phosphate Synthetic

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net