Search   
MSDS 
:
 Beeswax
CAS 
:
 8012-89-3
SYNONYMS 
:
 Beeswax White; Beeswax Yellow.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 8012-89-3 |White beeswax | 100.0 | 232-383-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Low hazard for usual industrial handling.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Expected to be a low ingestion hazard.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use with adequate ventilation. Avoid contact with skin and eyes.
Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep from contact with oxidizing
materials.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Good general ventilation should be sufficient to control airborne
levels.
Exposure Limits
CAS# 8012-89-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 145 deg F
Autoignition Temperature: Not applicable.
Flash Point: > 254 deg C (> 489.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 0.960-0.964@15C
Molecular Formula: mixute
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizers.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 8012-89-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
White beeswax -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 8012-89-3:
Canada
CAS# 8012-89-3 is listed on Canada's DSL List.
CAS# 8012-89-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 8012-89-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ammonia Solution (~0.88 specific gravity) 1336-21-6
Ammonia Solution (~0.91 specific gravity) 1336-21-6
Ammonia Buffer Solution 60-00-4
Ammonia Reagent 1 139-33-3
Ammonia Monitor First Reagent 139-33-3
Ammonium Benzoate 1863-63-4
Uracil 66-22-8
Ammonia Reagent 2 1310-73-2
Urease Tablets
Uric Acid 69-93-2
Isovaleric Acid 503-74-2
N-Valeric Acid 109-52-4
Ammonia Monitor Second Reagent 1310-73-2
Ammonia Monitor Reagent 637-39-8
Phenol Liquefied (80% Solution in water) 108-95-2
3-Chloro-1H-Indazole, 99% 29110-74-5
Phenolphthalein Solution 64-17-5
beta-Methylphenethylamine, 99% 582-22-9
Vanadium Pentoxide 1314-62-1
Vinyl Acetate Polymerised 9003-20-7
Beeswax 8012-89-3
Tris (Hydroxymethyl) Aminomethane Carbonate 68123-29-5
Triton Kaowool Ceramic Fibre 65997-17-3
Tungsten Metal Powder 7440-33-7
3Thermit 0-00-0
Thermit Ignition Powder 1304-29-6
Iso-Thiocyanato Benzene 103-72-0
Thioacetic Acid 507-09-5
2'-Hydroxypropiophenone, 97% 610-99-1
3,5-Dichlorophenylhydrazine Hydrochloride, 98.0% 63352-99-8
0.1M Trimethylanilinium hydroxide 67-56-1
Magnesium acetate 142-72-3
Mordant Blue 9 3624-68-8
Magnesium Carbonate 12125-28-9
Vanadyl Sulfate Solution 7664-93-9
Tri-n-hexylamine 102-86-3
Trifluoromethane Sulfonic Anhydride 358-23-6
Triethyl Orthoformate 122-51-0
N-Trifluoroacetylimidazole 1546-79-8
Trimethylanilinium hydroxide, 0.1M in methanol 67-56-1
3-Trimethoxysilyl-propyl-methacrylate 2530-85-0
Triethylammonium Chloride 554-68-7
Tridecafluoroheptanoic Acid 375-85-9
Tricaine Methane Sulfonate 886-86-2
Trichlorofluoromethane 75-69-4
o-Toluidine 95-53-4
p-Toluic Acid 99-94-5
o-Toluic Acid 118-90-1
Toluene-4-Sulfonyl Chloride 98-59-9
Tri-Aryl Phosphate Synthetic

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net