Search   
MSDS 
:
 Thioacetic Acid
CAS 
:
 507-09-5
SYNONYMS 
:
 Acetyl Mercaptan, Ethanethioic Acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 507-09-5 |Thioacetic acid | 100.0 | 208-063-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. Contact with liquid or vapor causes severe burns
and possible irreversible eye damage.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. Causes severe pain, nausea, vomiting,
diarrhea, and shock. Mercaptans may cause nausea and headache.
Exposure to high concentrations of mercaptans can produce
unconsciousness with cyanosis (bluish discoloration of skin due to
deficient oxygenation of the blood), cold extremities and rapid
pulse.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Vapors may cause dizziness
or suffocation. Exposure to high concentrations of mercaptans can
produce unconsciousness with cyanosis (bluish discoloration of skin
due to deficient oxygenation of the blood), cold extremities and
rapid pulse. Mercaptans may cause nausea and headache.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Repeated
inhalation may cause chronic bronchitis. Repeated exposure may cause
erosion of teeth.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
During a fire, irritating and highly toxic gases may be generated by
thermal decomposition or combustion. Use water spray to keep
fire-exposed containers cool. Wear appropriate protective clothing
to prevent contact with skin and eyes. Wear a self-contained
breathing apparatus (SCBA) to prevent contact with thermal
decomposition products. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Use water spray to dilute spill to
a non-flammable mixture. Avoid runoff into storm sewers and ditches
which lead to waterways. Clean up spills immediately, observing
precautions in the Protective Equipment section. Remove all sources
of ignition. Use a spark-proof tool. Provide ventilation. A vapor
suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Use spark-proof tools and
explosion proof equipment. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Do not get on skin or
in eyes. Do not ingest or inhale. Discard contaminated shoes. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Flammables-area. Do not store in metal
containers.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 507-09-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: pale-yellow
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 90 deg C
Freezing/Melting Point: <-17C
Autoignition Temperature: 427 deg C ( 800.60 deg F)
Flash Point: 39.4 deg C ( 102.92 deg F)
Explosion Limits, lower: 5.4
Explosion Limits, upper: 16
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: CH3COSH
Molecular Weight: 76.0874

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, metals, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen sulfide, sulfur oxides
(SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 507-09-5: AJ5600000
LD50/LC50:
Not available.
Carcinogenicity:
Thioacetic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 34 Causes burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
S 36/39 Wear suitable protective clothing and
eye/face protection.
WGK (Water Danger/Protection)
CAS# 507-09-5: 3
Canada
CAS# 507-09-5 is listed on Canada's DSL List.
CAS# 507-09-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 507-09-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/20/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ammonia Solution (~0.88 specific gravity) 1336-21-6
Ammonia Solution (~0.91 specific gravity) 1336-21-6
Ammonia Buffer Solution 60-00-4
Ammonia Reagent 1 139-33-3
Ammonia Monitor First Reagent 139-33-3
Ammonium Benzoate 1863-63-4
Uracil 66-22-8
Ammonia Reagent 2 1310-73-2
Urease Tablets
Uric Acid 69-93-2
Isovaleric Acid 503-74-2
N-Valeric Acid 109-52-4
Ammonia Monitor Second Reagent 1310-73-2
Ammonia Monitor Reagent 637-39-8
Phenol Liquefied (80% Solution in water) 108-95-2
3-Chloro-1H-Indazole, 99% 29110-74-5
Phenolphthalein Solution 64-17-5
beta-Methylphenethylamine, 99% 582-22-9
Vanadium Pentoxide 1314-62-1
Vinyl Acetate Polymerised 9003-20-7
Beeswax 8012-89-3
Tris (Hydroxymethyl) Aminomethane Carbonate 68123-29-5
Triton Kaowool Ceramic Fibre 65997-17-3
Tungsten Metal Powder 7440-33-7
3Thermit 0-00-0
Thermit Ignition Powder 1304-29-6
Iso-Thiocyanato Benzene 103-72-0
Thioacetic Acid 507-09-5
2'-Hydroxypropiophenone, 97% 610-99-1
3,5-Dichlorophenylhydrazine Hydrochloride, 98.0% 63352-99-8
0.1M Trimethylanilinium hydroxide 67-56-1
Magnesium acetate 142-72-3
Mordant Blue 9 3624-68-8
Magnesium Carbonate 12125-28-9
Vanadyl Sulfate Solution 7664-93-9
Tri-n-hexylamine 102-86-3
Trifluoromethane Sulfonic Anhydride 358-23-6
Triethyl Orthoformate 122-51-0
N-Trifluoroacetylimidazole 1546-79-8
Trimethylanilinium hydroxide, 0.1M in methanol 67-56-1
3-Trimethoxysilyl-propyl-methacrylate 2530-85-0
Triethylammonium Chloride 554-68-7
Tridecafluoroheptanoic Acid 375-85-9
Tricaine Methane Sulfonate 886-86-2
Trichlorofluoromethane 75-69-4
o-Toluidine 95-53-4
p-Toluic Acid 99-94-5
o-Toluic Acid 118-90-1
Toluene-4-Sulfonyl Chloride 98-59-9
Tri-Aryl Phosphate Synthetic

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net