**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 429-42-5 |Tetrabutylammonium tetrafluoroborate, | 99% | 207-058-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled. Can
produce delayed pulmonary edema.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Call a poison control center. If swallowed, do not induce
vomiting unless directed to do so by medical personnel. Never give
anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation. Use
with adequate ventilation. Wash clothing before reuse.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 429-42-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 160 - 162 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble
Specific Gravity/Density:
Molecular Formula: C16H36BF4N
Molecular Weight: 329.26
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 429-42-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetrabutylammonium tetrafluoroborate, 99% -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 429-42-5: No information available.
Canada
CAS# 429-42-5 is listed on Canada's NDSL List.
CAS# 429-42-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 429-42-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #3 Date: 5/28/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Chlorobenzyl Alcohol, 99+%
| 873-63-2 |
|
N-(2-Hydroxyethyl)-1,3-propanediamine, 97+%
| 4461-39-6 |
|
Tetrabutylammonium tetrafluoroborate, 99%
| 429-42-5 |
|
Adamantane, 99+%
| 281-23-2 |
|
3-Carbomethoxy-2-Pyrone, 99% (GC)
| 25991-27-9 |
|
Aflatoxin B2, crystalline
| 7220-81-7 |
|
2,2,6,6-Tetramethyl-4-Piperidone, Monohydrate, 98% (GC)
| 826-35-7 |
|
4-Ethoxymethylene-2-Phenyl-2-Oxazolin- 5-One, 97%
| 15646-46-5 |
|
Drimarene Red Z 2B, 78% (HPLC)
| 15792-41-3 |
|
Carbol Fuchsin Solution
| 64-17-5 |
|
Fehling Solution, Part A
| 7732-18-5 |
|
Buffer Solution pH 10
| 584-08-7 |
|
Buffer Solution pH 7
| 1310-73-2 |
|
4-Normal-Butoxyphenol, 99%
| 122-94-1 |
|
Buffer Solution pH 10.0 (Color-Coded Blue)
| 584-08-7 |
|
9-Methylanthracene, 99%
| 779-02-2 |
|
Phenoxyacetic acid, 98+%
| 122-59-8 |
|
5-(4-Hydroxyphenyl)-5-(p-tolyl)hydantoin, 99%
| 71766-23-9 |
|
Barium Chloranilate Trihydrate
| 13435-46-6 |
|
N-(Trimethylsilyl)acetamide, 97%
| 13435-12-6 |
|
2,4,6-Trimethoxybenzaldehyde, 98%
| 830-79-5 |
|
(1R,2R,3S,5R)-(-)-2,3-Pinanediol, 98%
| 22422-34-0 |
|
Dimethyl Sulfate
| 77-78-1 |
|
6-Hydroxynicotinic Acid, 99%
| 5006-66-6 |
|
2-Chlorocyclohexanone, 95%, Stabilized with CaCO3/MgO
| 822-87-7 |
|
n-Nonylamine, 98%
| 112-20-9 |
|
Oxamic Acid, Sodium Salt, 98%
| 565-73-1 |
|
Alpha-Terthienyl,99+%
| 1081-34-1 |
|
4-Pyridinecarboxaldehyde, 98%
| 872-85-5 |
|
4-3-(Trifluoromethyl)Phenyl??-4-Piperidino L Hydrochloride, 99% (TLC)
| 1683-49-4 |
|
1,3-Diphenylisobenzofuran, 99+%
| 5471-63-6 |
|
(S)-2-??n'-(N-Benzylprolyl)Amino??Benzo-Phenone, 99.5+%
| 96293-17-3 |
|
Sebaconitrile, 98% (GC)
| 1871-96-1 |
|
Tricyclohexyl Phosphine
| 2622-14-2 |
|
3-Ethoxyacrylonitrile, 98+%, mixture of cis and trans
| 61310-53-0 |
|
2-Chloro-5-(trifluoromethyl)pyridine 98+%
| 52334-81-3 |
|
Diisopropyl fluorophosphate
| 55-91-4 |
|
2,3,6-Trichlorobenzaldehyde,98%
| 4659-47-6 |
|
2-Diethylaminoethyl Chloride Hydrochloride, 99.5%
| 869-24-9 |
|
Tetramethylene glutarimide,99%
| 1075-89-4 |
|
1,4-Diacetoxybenzene, 98%
| 1205-91-0 |
|
2-Chloropyrimidine, 98+%
| 1722-12-9 |
|
5(6)-Carboxyfluorescein, 99% (UV-VIS)
| 72088-94-9 |
|
Silver Cyclohexanebutyrate
| 62638-04-4 |
|
1,2-Benzenedimethanol, 97%
| 612-14-6 |
|
4-Nitrobenzamide, 98%
| 619-80-7 |
|
Potassium tri-sec-butylborohydride 1M solution in THF
| 109-99-9 |
|
D(-)-Lyxose, 99+%, Mixture of Anomers
| 1114-34-7 |
|
Neodymium atomic absorption standard solution, 1 mg/ml Nd in 2% HNO3
| 7440-00-8 |
|
1,3-Dihydroxynaphthalene,99+%
| 132-86-5 |
|
|