Search   
MSDS 
:
 3-Chlorobenzyl Alcohol, 99+%
CAS 
:
 873-63-2
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 873-63-2 |3-Chlorobenzyl Alcohol | 99+% | 212-847-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Runoff from fire control or dilution water
may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 873-63-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 237 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.2110g/cm3
Molecular Formula: C7H7ClO
Molecular Weight: 142.58

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Acid anhydrides, acid chlorides, acids, oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 873-63-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Chlorobenzyl Alcohol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 873-63-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 873-63-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 873-63-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Chlorobenzyl Alcohol, 99+% 873-63-2
N-(2-Hydroxyethyl)-1,3-propanediamine, 97+% 4461-39-6
Tetrabutylammonium tetrafluoroborate, 99% 429-42-5
Adamantane, 99+% 281-23-2
3-Carbomethoxy-2-Pyrone, 99% (GC) 25991-27-9
Aflatoxin B2, crystalline 7220-81-7
2,2,6,6-Tetramethyl-4-Piperidone, Monohydrate, 98% (GC) 826-35-7
4-Ethoxymethylene-2-Phenyl-2-Oxazolin- 5-One, 97% 15646-46-5
Drimarene Red Z 2B, 78% (HPLC) 15792-41-3
Carbol Fuchsin Solution 64-17-5
Fehling Solution, Part A 7732-18-5
Buffer Solution pH 10 584-08-7
Buffer Solution pH 7 1310-73-2
4-Normal-Butoxyphenol, 99% 122-94-1
Buffer Solution pH 10.0 (Color-Coded Blue) 584-08-7
9-Methylanthracene, 99% 779-02-2
Phenoxyacetic acid, 98+% 122-59-8
5-(4-Hydroxyphenyl)-5-(p-tolyl)hydantoin, 99% 71766-23-9
Barium Chloranilate Trihydrate 13435-46-6
N-(Trimethylsilyl)acetamide, 97% 13435-12-6
2,4,6-Trimethoxybenzaldehyde, 98% 830-79-5
(1R,2R,3S,5R)-(-)-2,3-Pinanediol, 98% 22422-34-0
Dimethyl Sulfate 77-78-1
6-Hydroxynicotinic Acid, 99% 5006-66-6
2-Chlorocyclohexanone, 95%, Stabilized with CaCO3/MgO 822-87-7
n-Nonylamine, 98% 112-20-9
Oxamic Acid, Sodium Salt, 98% 565-73-1
Alpha-Terthienyl,99+% 1081-34-1
4-Pyridinecarboxaldehyde, 98% 872-85-5
4-3-(Trifluoromethyl)Phenyl??-4-Piperidino L Hydrochloride, 99% (TLC) 1683-49-4
1,3-Diphenylisobenzofuran, 99+% 5471-63-6
(S)-2-??n'-(N-Benzylprolyl)Amino??Benzo-Phenone, 99.5+% 96293-17-3
Sebaconitrile, 98% (GC) 1871-96-1
Tricyclohexyl Phosphine 2622-14-2
3-Ethoxyacrylonitrile, 98+%, mixture of cis and trans 61310-53-0
2-Chloro-5-(trifluoromethyl)pyridine 98+% 52334-81-3
Diisopropyl fluorophosphate 55-91-4
2,3,6-Trichlorobenzaldehyde,98% 4659-47-6
2-Diethylaminoethyl Chloride Hydrochloride, 99.5% 869-24-9
Tetramethylene glutarimide,99% 1075-89-4
1,4-Diacetoxybenzene, 98% 1205-91-0
2-Chloropyrimidine, 98+% 1722-12-9
5(6)-Carboxyfluorescein, 99% (UV-VIS) 72088-94-9
Silver Cyclohexanebutyrate 62638-04-4
1,2-Benzenedimethanol, 97% 612-14-6
4-Nitrobenzamide, 98% 619-80-7
Potassium tri-sec-butylborohydride 1M solution in THF 109-99-9
D(-)-Lyxose, 99+%, Mixture of Anomers 1114-34-7
Neodymium atomic absorption standard solution, 1 mg/ml Nd in 2% HNO3 7440-00-8
1,3-Dihydroxynaphthalene,99+% 132-86-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net