Search   
MSDS 
:
 2,3,6-Trichlorobenzaldehyde,98%
CAS 
:
 4659-47-6
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4659-47-6 |2,3,6-Trichlorobenzaldehyde | 98% | 225-104-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.The toxicological properties of this material have not
been fully investigated.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause cardiac disturbances. The toxicological properties
of this substance have not been fully investigated. May cause
central nervous system effects. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. May cause central
nervous system effects including vertigo, anxiety, depression,
muscle incoordination, and emotional instability. The toxicological
properties of this substance have not been fully investigated.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Aspiration may lead to pulmonary edema. May cause cardiac
abnormalities. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Containers may explode
when heated. Runoff from fire control or dilution water may cause
pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Do NOT get water
inside containers. For small fires, use dry chemical, carbon
dioxide, or water spray. For large fires, use dry chemical, carbon
dioxide, alcohol-resistant foam, or water spray.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Minimize dust generation and accumulation. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Use only in
a chemical fume hood. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Keep under a nitrogen blanket. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4659-47-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: light beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 86 - 88 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 209.45

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4659-47-6: CU8402000
LD50/LC50:
Not available.
Carcinogenicity:
2,3,6-Trichlorobenzaldehyde -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4659-47-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 4659-47-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4659-47-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Chlorobenzyl Alcohol, 99+% 873-63-2
N-(2-Hydroxyethyl)-1,3-propanediamine, 97+% 4461-39-6
Tetrabutylammonium tetrafluoroborate, 99% 429-42-5
Adamantane, 99+% 281-23-2
3-Carbomethoxy-2-Pyrone, 99% (GC) 25991-27-9
Aflatoxin B2, crystalline 7220-81-7
2,2,6,6-Tetramethyl-4-Piperidone, Monohydrate, 98% (GC) 826-35-7
4-Ethoxymethylene-2-Phenyl-2-Oxazolin- 5-One, 97% 15646-46-5
Drimarene Red Z 2B, 78% (HPLC) 15792-41-3
Carbol Fuchsin Solution 64-17-5
Fehling Solution, Part A 7732-18-5
Buffer Solution pH 10 584-08-7
Buffer Solution pH 7 1310-73-2
4-Normal-Butoxyphenol, 99% 122-94-1
Buffer Solution pH 10.0 (Color-Coded Blue) 584-08-7
9-Methylanthracene, 99% 779-02-2
Phenoxyacetic acid, 98+% 122-59-8
5-(4-Hydroxyphenyl)-5-(p-tolyl)hydantoin, 99% 71766-23-9
Barium Chloranilate Trihydrate 13435-46-6
N-(Trimethylsilyl)acetamide, 97% 13435-12-6
2,4,6-Trimethoxybenzaldehyde, 98% 830-79-5
(1R,2R,3S,5R)-(-)-2,3-Pinanediol, 98% 22422-34-0
Dimethyl Sulfate 77-78-1
6-Hydroxynicotinic Acid, 99% 5006-66-6
2-Chlorocyclohexanone, 95%, Stabilized with CaCO3/MgO 822-87-7
n-Nonylamine, 98% 112-20-9
Oxamic Acid, Sodium Salt, 98% 565-73-1
Alpha-Terthienyl,99+% 1081-34-1
4-Pyridinecarboxaldehyde, 98% 872-85-5
4-3-(Trifluoromethyl)Phenyl??-4-Piperidino L Hydrochloride, 99% (TLC) 1683-49-4
1,3-Diphenylisobenzofuran, 99+% 5471-63-6
(S)-2-??n'-(N-Benzylprolyl)Amino??Benzo-Phenone, 99.5+% 96293-17-3
Sebaconitrile, 98% (GC) 1871-96-1
Tricyclohexyl Phosphine 2622-14-2
3-Ethoxyacrylonitrile, 98+%, mixture of cis and trans 61310-53-0
2-Chloro-5-(trifluoromethyl)pyridine 98+% 52334-81-3
Diisopropyl fluorophosphate 55-91-4
2,3,6-Trichlorobenzaldehyde,98% 4659-47-6
2-Diethylaminoethyl Chloride Hydrochloride, 99.5% 869-24-9
Tetramethylene glutarimide,99% 1075-89-4
1,4-Diacetoxybenzene, 98% 1205-91-0
2-Chloropyrimidine, 98+% 1722-12-9
5(6)-Carboxyfluorescein, 99% (UV-VIS) 72088-94-9
Silver Cyclohexanebutyrate 62638-04-4
1,2-Benzenedimethanol, 97% 612-14-6
4-Nitrobenzamide, 98% 619-80-7
Potassium tri-sec-butylborohydride 1M solution in THF 109-99-9
D(-)-Lyxose, 99+%, Mixture of Anomers 1114-34-7
Neodymium atomic absorption standard solution, 1 mg/ml Nd in 2% HNO3 7440-00-8
1,3-Dihydroxynaphthalene,99+% 132-86-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net