Search   
MSDS 
:
 4-Butoxyaniline, 97% (gc)
CAS 
:
 4344-55-2
SYNONYMS 
:
 4-Butyloxybenzenamine; Aminophenyl-n-butyl ether; Aniline, p-butoxy-;     Benzenamine, 4-butoxy-; p-Aminophenol n-butyl ether; p-Butoxyaniline
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4344-55-2 |4-Butoxyaniline | 97 | 224-402-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. Absorption into the body may cause cyanosis
(bluish discoloration of skin due to deficient oxygenation of the
blood).
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May form methemoglobin which in sufficient concentration
causes cyanosis (bluish discoloration of skin due to deficient
oxygenation of the blood).
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema. Inhalation of aniline causes anoxia due to the formation of
methemoglobin.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Cover with sand, dry lime or soda ash and place in a closed
container for disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Do not ingest or inhale. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4344-55-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear dark brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 148.0 - 149.0 deg C @ 13.00mm
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .9920g/cm3
Molecular Formula: C10H15NO
Molecular Weight: 165.24

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4344-55-2: BW9420000
LD50/LC50:
CAS# 4344-55-2: Oral, mouse: LD50 = 500 mg/kg; Oral, rabbit: LD50 =
500 mg/kg.
Carcinogenicity:
4-Butoxyaniline -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 4344-55-2: No information available.
Canada
CAS# 4344-55-2 is listed on Canada's NDSL List.
CAS# 4344-55-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4344-55-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Phenethyl alcohol, 99+% 60-12-8
1,8-Diaminonaphthalene, 99% 479-27-6
4,4'-Methylene-Bis-(2,6-Diethylaniline) 99+% 13680-35-8
Poly(styrene), average m.w. 250.000 9003-53-6
Poly(styrene), ultra high molecular weight 9003-53-6
Heptafluorobutyric Acid, 99% 375-22-4
3-Chloro-1,2-Propanediol, 98% 96-24-2
1,2-Dibromobenzene, 99% 583-53-9
2-Amino-2-Methyl-1,3-Propanediol, 99% 115-69-5
Aflatoxin G2, crystalline 7241-98-7
2-Imidazolidone hemihydrate, 99+% 120-93-4
4-Chloro-1-butanol, 90-95% (GC), balance THF and HCl 109-99-9
Dibromomethane, 99% 74-95-3
N,N,3,5-Tetramethylaniline, 99% (GC) 4913-13-7
7-Bromoheptanonitrile, 98% 20965-27-9
o-Phthaloyl dichloride, remainder mainly phthalic acid, 90% 88-95-9
Vanadium(V) oxide, 99.6+% 1314-62-1
2,6-Bis(Hydroxymethyl)-P-Cresol, 97% 91-04-3
Anthrone, 98% 90-44-8
4-tert-Butyltoluene, p.a. 98-51-1
Methyl 4-Nitrobenzenesulfonate, 99+% 6214-20-6
7-Amino-4-Methylcoumarin, 98% 26093-31-2
Ammonium Sulfamate P.A. 7773-06-0
Trans-Stilbene, 96% 103-30-0
tert-Butyl chloroacetate, 99% 107-59-5
Cinnamoyl chloride 98%, Predominantly Trans 102-92-1
Iodine Monochloride, 98% 7790-99-0
Allyl phenyl ether, 99% 1746-13-0
N,N-Diethylethanolamine 100-37-8
Lithium perchlorate 7791-03-9
(S)-(-)-Amino-2-(1'-methoxy-1'-methylethyl )pyrrolidine 118535-61-8
Dl-2,4-pentanediol, 97% 625-69-4
Sodium hexafluoroantimonate, tech. 16925-25-0
1,3-Diphenylguanidine, 97% 102-06-7
4-Butoxyaniline, 97% (gc) 4344-55-2
L(-)-Epinephrine, 99% 51-43-4
Lithium bis(trimethylsilyl)amide 1M solution in THF/cyclohexane 109-99-9
2-Chloro-5-Nitrobenzaldehyde, 97% 6361-21-3
Tetraethylammonium Perchlorate, 95% (Titr.) 2567-83-1
l-Tartaric acid, disodium salt dihydrate, p.a. 6106-24-7
Digoxin, 95% HPLC (on Dried Substance) 20830-75-5
n-Acetylneuraminic acid, from bovine milk, 98% 131-48-6
1,4-Naphthoquinone, 99% (GC), contains up to 6% moisture 130-15-4
Methyl disulfide, 99% 624-92-0
Dowex 1x8-100 ion-exchange resin 12627-85-9
Dowex 1x8-400 ion-exchange resin 12627-85-9
Ethyl red 76058-33-8
Glycylglycine, 99+% 556-50-3
Lithium aluminum hydride, 95+% 16853-85-3
Cerium(IV) Oxide, 99.999%, - 325 Mesh 1306-38-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net