**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 88-95-9 |2-Phthaloyl dichloride | 90 | 201-869-0 |
|----------------|--------------------------------------|----------|-----------|
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use of
water will produce irritating and toxic vapors of hydrogen chloride.
Hydrochloric acid solutions react with most metals, forming flammable
hydrogen gas.
Extinguishing Media:
Use carbon dioxide or dry chemical. DO NOT USE WATER OR FOAM.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation. Do not expose
spill to water. Do not get water inside containers. Approach spill
from upwind.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Use with adequate ventilation. Discard
contaminated shoes. Keep from contact with moist air and steam. Do
not breathe vapor or mist.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 88-95-9:
CAS# 88-99-3:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless to pale yellow
Odor: pungent odor
pH: Not available.
Vapor Pressure: 0.0162 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 269 - 271 deg C @ 760 mmHg
Freezing/Melting Point: 12 deg C
Autoignition Temperature: Not available.
Flash Point: > 230 deg F (> 110.00 deg C)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: decomposes in alcohol & water
Specific Gravity/Density: 1.400 g/cm3
Molecular Formula: C8H4Cl2O2
Molecular Weight: 203.02
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Moisture, metals, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, alcohols, water.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 88-95-9 unlisted.
CAS# 88-99-3: TH9625000
LD50/LC50:
Not available.
CAS# 88-99-3: Oral, mouse: LD50 = 2530 mg/kg.
Carcinogenicity:
2-Phthaloyl dichloride -
Not listed by ACGIH, IARC, or NTP.
Phthalic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 88-95-9: No information available.
CAS# 88-99-3: 0
Canada
CAS# 88-95-9 is listed on Canada's DSL List.
CAS# 88-99-3 is listed on Canada's DSL List.
CAS# 88-95-9 is not listed on Canada's Ingredient Disclosure List.
CAS# 88-99-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 88-95-9 is listed on the TSCA inventory.
CAS# 88-99-3 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
Text for R-phrases from Section 2
MSDS Creation Date: 1/21/1999 Revision #4 Date: 7/15/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Phenethyl alcohol, 99+%
| 60-12-8 |
|
1,8-Diaminonaphthalene, 99%
| 479-27-6 |
|
4,4'-Methylene-Bis-(2,6-Diethylaniline) 99+%
| 13680-35-8 |
|
Poly(styrene), average m.w. 250.000
| 9003-53-6 |
|
Poly(styrene), ultra high molecular weight
| 9003-53-6 |
|
Heptafluorobutyric Acid, 99%
| 375-22-4 |
|
3-Chloro-1,2-Propanediol, 98%
| 96-24-2 |
|
1,2-Dibromobenzene, 99%
| 583-53-9 |
|
2-Amino-2-Methyl-1,3-Propanediol, 99%
| 115-69-5 |
|
Aflatoxin G2, crystalline
| 7241-98-7 |
|
2-Imidazolidone hemihydrate, 99+%
| 120-93-4 |
|
4-Chloro-1-butanol, 90-95% (GC), balance THF and HCl
| 109-99-9 |
|
Dibromomethane, 99%
| 74-95-3 |
|
N,N,3,5-Tetramethylaniline, 99% (GC)
| 4913-13-7 |
|
7-Bromoheptanonitrile, 98%
| 20965-27-9 |
|
o-Phthaloyl dichloride, remainder mainly phthalic acid, 90%
| 88-95-9 |
|
Vanadium(V) oxide, 99.6+%
| 1314-62-1 |
|
2,6-Bis(Hydroxymethyl)-P-Cresol, 97%
| 91-04-3 |
|
Anthrone, 98%
| 90-44-8 |
|
4-tert-Butyltoluene, p.a.
| 98-51-1 |
|
Methyl 4-Nitrobenzenesulfonate, 99+%
| 6214-20-6 |
|
7-Amino-4-Methylcoumarin, 98%
| 26093-31-2 |
|
Ammonium Sulfamate P.A.
| 7773-06-0 |
|
Trans-Stilbene, 96%
| 103-30-0 |
|
tert-Butyl chloroacetate, 99%
| 107-59-5 |
|
Cinnamoyl chloride 98%, Predominantly Trans
| 102-92-1 |
|
Iodine Monochloride, 98%
| 7790-99-0 |
|
Allyl phenyl ether, 99%
| 1746-13-0 |
|
N,N-Diethylethanolamine
| 100-37-8 |
|
Lithium perchlorate
| 7791-03-9 |
|
(S)-(-)-Amino-2-(1'-methoxy-1'-methylethyl )pyrrolidine
| 118535-61-8 |
|
Dl-2,4-pentanediol, 97%
| 625-69-4 |
|
Sodium hexafluoroantimonate, tech.
| 16925-25-0 |
|
1,3-Diphenylguanidine, 97%
| 102-06-7 |
|
4-Butoxyaniline, 97% (gc)
| 4344-55-2 |
|
L(-)-Epinephrine, 99%
| 51-43-4 |
|
Lithium bis(trimethylsilyl)amide 1M solution in THF/cyclohexane
| 109-99-9 |
|
2-Chloro-5-Nitrobenzaldehyde, 97%
| 6361-21-3 |
|
Tetraethylammonium Perchlorate, 95% (Titr.)
| 2567-83-1 |
|
l-Tartaric acid, disodium salt dihydrate, p.a.
| 6106-24-7 |
|
Digoxin, 95% HPLC (on Dried Substance)
| 20830-75-5 |
|
n-Acetylneuraminic acid, from bovine milk, 98%
| 131-48-6 |
|
1,4-Naphthoquinone, 99% (GC), contains up to 6% moisture
| 130-15-4 |
|
Methyl disulfide, 99%
| 624-92-0 |
|
Dowex 1x8-100 ion-exchange resin
| 12627-85-9 |
|
Dowex 1x8-400 ion-exchange resin
| 12627-85-9 |
|
Ethyl red
| 76058-33-8 |
|
Glycylglycine, 99+%
| 556-50-3 |
|
Lithium aluminum hydride, 95+%
| 16853-85-3 |
|
Cerium(IV) Oxide, 99.999%, - 325 Mesh
| 1306-38-3 |
|
|