Search   
MSDS 
:
 N,N,3,5-Tetramethylaniline, 99% (GC)
CAS 
:
 4913-13-7
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4913-13-7 |Benzenamine, N,N,3,5-Tetramethyl- | 99 | 225-539-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 33 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Danger of cumulative effects. Irritating to eyes, respiratory system
and skin.The toxicological properties of this material have not been
fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Methemoglobinemia is characterized by
dizziness, drowsiness, headache, shortness of breath, cyanosis
(bluish discoloration of skin due to deficient oxygenation of the
blood), rapid heart rate and chocolate-brown colored blood.
Overexposure may cause methemoglobinemia.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Methemoglobinemia is
characterized by dizziness, drowsiness, headache, shortness of
breath, cyanosis (bluish discoloration of skin due to deficient
oxygenation of the blood), rapid heart rate and chocolate-brown
blood. Inhalation of aniline causes anoxia due to the formation of
methemoglobin.
Chronic:
May cause methemoglobinemia, which is characterized by
chocolate-brown colored blood, headache, weakness, dizziness, breath
shortness, cyanosis (bluish skin due to deficient oxygenation of
blood), rapid heart rate, unconsciousness and possible death.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively. For methemoglobinemia,
administer oxygen alone or with Methylene Blue depending on the
methemoglobin concentration in the blood.
Antidote:
Methylene blue, alone or in combination with oxygen is indicated as
a treatment in nitrite induced methemoglobinemia.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Wash clothing before reuse. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4913-13-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless - pale-yellow
Odor: aniline-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 226 - 228 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 90 deg C ( 194.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9130g/cm3
Molecular Formula: C10H15N
Molecular Weight: 149.24

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Acids, acid chlorides, acid anhydrides, carbon dioxide, strong
oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4913-13-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzenamine, N,N,3,5-Tetramethyl- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 33 Danger of cumulative effects.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4913-13-7: No information available.
Canada
CAS# 4913-13-7 is listed on Canada's NDSL List.
CAS# 4913-13-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4913-13-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/17/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Phenethyl alcohol, 99+% 60-12-8
1,8-Diaminonaphthalene, 99% 479-27-6
4,4'-Methylene-Bis-(2,6-Diethylaniline) 99+% 13680-35-8
Poly(styrene), average m.w. 250.000 9003-53-6
Poly(styrene), ultra high molecular weight 9003-53-6
Heptafluorobutyric Acid, 99% 375-22-4
3-Chloro-1,2-Propanediol, 98% 96-24-2
1,2-Dibromobenzene, 99% 583-53-9
2-Amino-2-Methyl-1,3-Propanediol, 99% 115-69-5
Aflatoxin G2, crystalline 7241-98-7
2-Imidazolidone hemihydrate, 99+% 120-93-4
4-Chloro-1-butanol, 90-95% (GC), balance THF and HCl 109-99-9
Dibromomethane, 99% 74-95-3
N,N,3,5-Tetramethylaniline, 99% (GC) 4913-13-7
7-Bromoheptanonitrile, 98% 20965-27-9
o-Phthaloyl dichloride, remainder mainly phthalic acid, 90% 88-95-9
Vanadium(V) oxide, 99.6+% 1314-62-1
2,6-Bis(Hydroxymethyl)-P-Cresol, 97% 91-04-3
Anthrone, 98% 90-44-8
4-tert-Butyltoluene, p.a. 98-51-1
Methyl 4-Nitrobenzenesulfonate, 99+% 6214-20-6
7-Amino-4-Methylcoumarin, 98% 26093-31-2
Ammonium Sulfamate P.A. 7773-06-0
Trans-Stilbene, 96% 103-30-0
tert-Butyl chloroacetate, 99% 107-59-5
Cinnamoyl chloride 98%, Predominantly Trans 102-92-1
Iodine Monochloride, 98% 7790-99-0
Allyl phenyl ether, 99% 1746-13-0
N,N-Diethylethanolamine 100-37-8
Lithium perchlorate 7791-03-9
(S)-(-)-Amino-2-(1'-methoxy-1'-methylethyl )pyrrolidine 118535-61-8
Dl-2,4-pentanediol, 97% 625-69-4
Sodium hexafluoroantimonate, tech. 16925-25-0
1,3-Diphenylguanidine, 97% 102-06-7
4-Butoxyaniline, 97% (gc) 4344-55-2
L(-)-Epinephrine, 99% 51-43-4
Lithium bis(trimethylsilyl)amide 1M solution in THF/cyclohexane 109-99-9
2-Chloro-5-Nitrobenzaldehyde, 97% 6361-21-3
Tetraethylammonium Perchlorate, 95% (Titr.) 2567-83-1
l-Tartaric acid, disodium salt dihydrate, p.a. 6106-24-7
Digoxin, 95% HPLC (on Dried Substance) 20830-75-5
n-Acetylneuraminic acid, from bovine milk, 98% 131-48-6
1,4-Naphthoquinone, 99% (GC), contains up to 6% moisture 130-15-4
Methyl disulfide, 99% 624-92-0
Dowex 1x8-100 ion-exchange resin 12627-85-9
Dowex 1x8-400 ion-exchange resin 12627-85-9
Ethyl red 76058-33-8
Glycylglycine, 99+% 556-50-3
Lithium aluminum hydride, 95+% 16853-85-3
Cerium(IV) Oxide, 99.999%, - 325 Mesh 1306-38-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net