Search   
MSDS 
:
 2-Chloro-2-methylpropane, 99%
CAS 
:
 507-20-0
SYNONYMS 
:
 tert-Butyl chloride; 2-Chloroisobutane; 2-Chloro-2-methylpropane;     Trimethylchloromethane.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 507-20-0 |2-Chloro-2-methylpropane | 99 | 208-066-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause central nervous system depression, characterized
by excitement, followed by headache, dizziness, drowsiness, and
nausea. Advanced stages may cause collapse, unconsciousness, coma
and possible death due to respiratory failure.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. Aspiration may lead to pulmonary edema. Vapors may cause
dizziness or suffocation. May cause burning sensation in the chest.
Chronic:
May cause liver and kidney damage. Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Wash clothing before reuse. Remove contaminated
clothing and shoes. Flush skin with plenty of soap and water.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Flammable Liquid. Can release vapors
that form explosive mixtures at temperatures above the flashpoint.
Use water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water. Cool containers with flooding quantities of water until well
after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation. A vapor suppressing foam
may be used to reduce vapors. Water spray may reduce vapor but may
not prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Keep away from heat,
sparks and flame. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames. Use
only with adequate ventilation.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 507-20-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: none reported
pH: Not available.
Vapor Pressure: 266 mbar @ 15 deg C
Viscosity: 0.51 mPas 20 deg C
Boiling Point: 51 deg C
Freezing/Melting Point: -25 deg C
Autoignition Temperature: 570 deg C ( 1,058.00 deg F)
Flash Point: < 0 deg C (< 32.00 deg F)
Explosion Limits, lower: 2.0%
Explosion Limits, upper: 8.8%
Decomposition Temperature: Not available.
Solubility in water: Sparingly soluble in water
Specific Gravity/Density: 0.87
Molecular Formula: C4H9Cl
Molecular Weight: 92.57

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources, excess
heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 507-20-0: TX5040000
LD50/LC50:
Not available.
Carcinogenicity:
2-Chloro-2-methylpropane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CHLOROBUTANES
Hazard Class: 3
UN Number: 1127
Packing Group: II
IMO
Shipping Name: CHLOROBUTANES
Hazard Class: 3.2
UN Number: 1127
Packing Group: II
RID/ADR
Shipping Name: CHLOROBUTANES
Hazard Class: 3
UN Number: 1127
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 507-20-0: 2
Canada
CAS# 507-20-0 is listed on Canada's DSL List.
CAS# 507-20-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 507-20-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/23/1997 Revision #5 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Nuclear Fast Red 6409-77-4
5-Sulfosalicylic acid dihydrate, p.a. 5965-83-3
5-Chloro-1-methyl-4-nitroimidazole 4897-25-0
Ethyl 2-ethylacetoacetate 607-97-6
tert-Butyl isothiocyanate, 99% (gc) 590-42-1
2-(4-Chlorosulfonylphenyl)ethyltrimethoxysilane 50% solution in 75-09-2
Methyl 2-Chloropropionate, 96% 17639-93-9
Sulfur, 99.5+%, Refined 7704-34-9
Sulfuric Acid, 95-98%, C.P. 7664-93-9
3-Octylthiophene, 90% 65016-62-8
7-Methoxycoumarin, 98+% 531-59-9
L-allo-Threonine, 99% 28954-12-3
1-(4-Chloromethylphenyl)-2-phenylethane, 98% 80676-35-3
L-Tartaric Acid, Reagent ACS, 99+% 87-69-4
3-Chloro-4-Fluorophenol, 99% 2612-57-9
2-Chloro-2-methylpropane, 99% 507-20-0
Testosterone, 99+% (tlc) 58-22-0
4-(4-Ethoxyphenylazo)-M-Phenylenediamine Monohydrochloride, 98% 2313-87-3
Tert-Amyl Alcohol, P.A. 75-85-4
Sodium amide 7782-92-5
4-(3-Phenylpropyl)pyridine, 97% 2057-49-0
Tetrachloroethylene 127-18-4
Tetradecane 629-59-4
Tetraethylammonium Bromide, 99+% 71-91-0
Tetrahydrofuran, 99+%, Stabilized with 0.025% BHT 109-99-9
Ethyl 3,5-dimethyl-1H-pyrrole-2-carboxylate, 98% 2199-44-2
Tetrahydroxy-P-Benzoquinone, 97% (Titr.) 319-89-1
1,2,3,4-Tetrahydronaphthalene, 95-98% 119-64-2
BOC-L-Phenylalanine, 99+% 13734-34-4
Antimony 7440-36-0
Tetramethylammonium hydroxide pentahydrate 75-59-2
Tetramethylammonium hydroxide, 25% in water 75-59-2
Thallous acetate, 99% (Titr.) 563-68-8
D-Leucine Methyl Ester Hydrochloride, 98% 5845-53-4
Thiamine hydrochloride 67-03-8
Ethyl 2-oxo-4-phenylbutyrate, 97% 64920-29-2
Mercaptoacetic acid, 80% in water 68-11-1
2-Chloromethyl-3,5-dimethyl-4-methoxypyridine hydrochloride 86604-75-3
Thiourea, P.A. 62-56-6
Sebacoyl Chloride, 99% (titr.) 111-19-3
Sodium Perchlorate Monohydrate, P.A. 7791-07-3
2'-Aminoacetophenone, 97% (GC) 551-93-9
1-Naphthoxyacetic acid, 97% 2976-75-2
2-Amino-4,6-dimethoxpyrimidine, 98% 36315-01-2
Carbamazepine, 99% 298-46-4
R-(+)-3-Pyrrolidnol, 98% 2799-21-5
Trimethylene sulfide, 97% 287-27-4
(S)-3-Pyrrolidinol, 99% 100243-39-8
D-(+)-Phenyllactic Acid, 98% 7326-19-4
Potassium trifluoromethanesulfonate, 99% 2926-27-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net