Search   
MSDS 
:
 DL-10-Camphorsulfonic Acid, 98%
CAS 
:
 5872-08-2
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5872-08-2 |DL-10-Camphorsulfonic Acid | 98% | 227-527-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause nausea and vomiting.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam. Do
NOT get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid runoff into storm sewers and ditches which lead to
waterways. Clean up spills immediately, observing precautions in the
Protective Equipment section. Provide ventilation. Do not get water
inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Minimize
dust generation and accumulation. Avoid breathing vapors from heated
material. Keep container tightly closed. Do not ingest or inhale.
Use with adequate ventilation. Do not allow contact with water.
Discard contaminated shoes. Keep from contact with moist air and
steam.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Corrosives area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5872-08-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: tan
Odor: Irritating odor.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Decomposes
Freezing/Melting Point: 199 deg C dec
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 199 deg C
Solubility in water: practically insoluble in ether
Specific Gravity/Density:
Molecular Formula: C10H16O4S
Molecular Weight: 232.29

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5872-08-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
DL-10-Camphorsulfonic Acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 5872-08-2: No information available.
Canada
CAS# 5872-08-2 is listed on Canada's DSL List.
CAS# 5872-08-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5872-08-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/22/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Melamine, P.A. 108-78-1
Chlorodifluoroacetic Acid, 98% 76-04-0
O-Anisic Acid, 99% 579-75-9
3,4'-Dichloropropiophenone, 95% 3946-29-0
cis-3-Hexen-1-ol, 98% 928-96-1
2,4,6-Tribromophenol, 98% 118-79-6
1-Ethyl-3-Piperidone Hydrochloride, 97% 41361-28-8
Propionyl chloride, 98% 79-03-8
n-Methylhippuric acid, 99% 2568-34-5
2-Hydroxybenzyl Alcohol, 97% 90-01-7
3-Acetamidophenol, 99+% 621-42-1
2-(4-Chlorobenzyl)pyridine 4350-41-8
2,5-Diaminopyridine dihydrochloride, 98% 26878-35-3
1-(4-Chlorophenyl)-1-Cyclopropanemethanol, 98% 80866-81-5
Ethyl dichlorophosphate, 97% 1498-51-7
Merocyanine 540, 99% (UV-Vis) 62796-23-0
Thallous Malonate, 98% (Titr.) 2757-18-8
Thiofluorescein, 99% (uv-vis) 25319-73-3
N,N-Diethyl-P-Toluidine, 99% (GC) 613-48-9
Hexyl isocyanate, 99% (GC) 2525-62-4
1-(4-Chlorophenyl)-1-Cyclopropane- Carbonitrile 98% 64399-27-5
(-)-2,3-o-isopropylidene-2,3-dihydroxy- 32305-98-9
1-(4-Methylphenyl)-1-Cyclopropane Carboxylic Acid, 98% 0-00-1
Palladium(ii) bromide 13444-93-4
2,5-Dimethoxytetrahydrofuran, 99%, mixture of cis- and trans- isomers 696-59-3
Ethyl formate, 98+% 109-94-4
Gallium(iii) nitrate hydrate, 99.9998%, 13494-90-1
4-Nitrophenyl trimethylacetate, 98+% 4195-17-9
DL-10-Camphorsulfonic Acid, 98% 5872-08-2
Anthracene, 98% 120-12-7
4-Cyanophenyl Isocyanate, 95% (HPLC) 40465-45-0
2-Furoyl chloride, 98+% (gc) 527-69-5
Nitron, 95% (UV-VIS) 2218-94-2
Benzyltriphenylphosphonium chloride, 98% 1100-88-5
4-Chloro-2-Fluorobenzonitrile, 99.5+% 57381-51-8
Trans-3-Chloroacrylic Acid, 99% 2345-61-1
2-Thiouracil, 99% (UV-Vis) 141-90-2
Dl-threonine, 99.5% 80-68-2
4-Phenyl-1,3-Dioxane, 99+% 772-00-9
N-Methylanilinium Trifluoroacetate, 99% 29885-95-8
Phloroglucinol anhydr., min. 99%(gc) 108-73-6
Pyrene, 98+%(gc) 129-00-0
2-Iodotoluene, 98% 615-37-2
4,4' -Azoxyanisole, 98+% 1562-94-3
2-Fluorobenzyl alcohol, 98% 446-51-5
Bbd 18378-20-6
Ethylene glycol monoethyl ether 110-80-5
4',5'-Dibromofluorescein 596-03-2
Ethylene Glycol Monoethyl Ether Acetate 111-15-9
1-[(3-Nitrobenzyloxy)methyl] pyridinium chloride, 99% (titr.) 3009-13-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net