Search   
MSDS 
:
 Methylurea, 97%
CAS 
:
 598-50-5
SYNONYMS 
:
 N-Methylurea; 1-Methylurea; Monomethylurea
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 598-50-5 |Methylurea | 97 | 209-935-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 598-50-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: Moist White Crystals
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: decomposition
Freezing/Melting Point: 101 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Freely Soluble.
Specific Gravity/Density: 1.205 @ 20/20 C
Molecular Formula: C2H6N2O
Molecular Weight: 74.08

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 598-50-5: YT7175000
LD50/LC50:
Not available.
Carcinogenicity:
Methylurea -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 598-50-5: 1
Canada
CAS# 598-50-5 is listed on Canada's NDSL List.
CAS# 598-50-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 598-50-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/23/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lutetium, powder, ca. 40 mesh, 99.9% 7439-94-3
Platinum, foil, 0.025mm thick, 99.99% 7440-06-4
Platinum, powder, 0.8-2.2 micron, 99.9% 7440-06-4
Platinum, powder, 0.27-0.47 micron, 99.9% 7440-06-4
Scandium, Powder, -40 Mesh, 99.9+% 7440-20-2
Palladium foil, 99.9+% 7440-05-3
Bis(Pentamethylcyclopentadienyl)Ruthenium 84821-53-4
Phenylmagnesium bromide, 3m solution in diethyl ether 100-58-3
Isopropylmagnesium chloride, 2.0 m solutio n in diethyl ether 1068-55-9
Rhodium (III) Nitrate Solution, ca. 10% (wt/ wt) Rh in 20-25 wt% HNO3 7697-37-2
Allylmagnesium bromide, 1m solution in diethylether 60-29-7
Titanium diisopropoxide bis(2,4-pentanedionate), 75 wt% in 2-propanol 67-63-0
Osmium Tetroxide, 4 wt% Solution in Water 7732-18-5
Lithium Cyanide, 0.5M Solution in N,N-Dimethylformamide 2408-36-8
Methylmagnesium bromide, 3M solution in diethyl ether 75-16-1
8-Hydroxy-5-Nitroquinoline, 96% 4008-48-4
Ethylmagnesium bromide, 3m solution in diethyl ether 925-90-6
Polyepichlorohydrin, Average MW ca. 700.000 (GPC) 24969-06-0
(+/-)-2-Phenylcycloheptanone, 99% 14996-78-2
4'-Chloro-2,2':6',2''-Terpyridine, 99% 128143-89-5
(3,5-Dimethoxyphenyl)acetic acid, 98% 4670-10-4
2,4-Dimethylpyrrole, 97% 625-82-1
O-Eugenol, 98% 579-60-2
2-(Bromomethyl)-2-(Hydroxymethyl)-1,3-Propanediol, 99% 19184-65-7
4,4'-Dipyridyl N,N'-Dioxide Dihydrate, 98%
2,2'-Dipyridyl N,N'-Dioxide, 98% 7275-43-6
Ethyl Thiooxamate, 95% 16982-21-1
2',4'-Dihydroxy-3'-Methylpropiophenone, 98 % 63876-46-0
Oleylamine, 97% primary amine-value approx . c18-content 80-90% 112-90-3
2-Hydroxy-4-Methyl-3-Nitropyridine, 98% 21901-18-8
2-Hydroxy-4-Methyl-5-Nitropyridine, 98% 21901-41-7
2-Amino-4-Methyl-5-Nitropyridine, 98% 21901-40-6
2-Amino-4-Methyl-3-Nitropyridine, 98% 6635-86-5
Tetrabutylammonium difluorotriphenyl stannate 139353-88-1
Triphenyltin fluoride 379-52-2
(4-Hydroxyphenyl)-2-Propionic Acid 938-96-5
D,l-1-aminoindane-1-carboxylic acid
N-Boc-d,l-1-Aminoindane-1-Carboxylic Acid
N-fmoc-d,l-1-aminoindane-1-carboxylic acid
N-boc-d-1,2,3,4-tetrahydroisoquinoline-3-c arboxylic acid
N-fmoc-d-1,2,3,4-tetrahydroisoquinoline-3- carboxylic acid
N-boc-d-1,2,3,4-tetrahydro-beta-carboline- 3-carboxylic acid
N-Boc-2-Aminoindane-2-Carboxylic Acid
N-fmoc-d,l-2-aminotetralin-2-carboxylic acid
2-Chloro-4-Hydroxybenzoic Acid Hydrate, 98 % (On the Dried Substance) 56363-84-9
Methyl stearate, mixture of homologs 112-39-0
4-Bromophenol, 97% (GC) 106-41-2
1,1,1,5,5,5-Hexafluoroacetylacetone, 96% 1522-22-1
Methylurea, 97% 598-50-5
2-Methylbutyraldehyde, 95% 96-17-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net