Search   
MSDS 
:
 (4-Hydroxyphenyl)-2-Propionic Acid
CAS 
:
 938-96-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 938-96-5 |(4-Hydroxyphenyl)-2-Propionic Acid | | 213-352-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation. Can produce delayed
pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Use with adequate ventilation. Wash clothing before
reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 938-96-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white to light beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C9H10O3
Molecular Weight: 166.0682

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 938-96-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(4-Hydroxyphenyl)-2-Propionic Acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 938-96-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 938-96-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 938-96-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/15/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lutetium, powder, ca. 40 mesh, 99.9% 7439-94-3
Platinum, foil, 0.025mm thick, 99.99% 7440-06-4
Platinum, powder, 0.8-2.2 micron, 99.9% 7440-06-4
Platinum, powder, 0.27-0.47 micron, 99.9% 7440-06-4
Scandium, Powder, -40 Mesh, 99.9+% 7440-20-2
Palladium foil, 99.9+% 7440-05-3
Bis(Pentamethylcyclopentadienyl)Ruthenium 84821-53-4
Phenylmagnesium bromide, 3m solution in diethyl ether 100-58-3
Isopropylmagnesium chloride, 2.0 m solutio n in diethyl ether 1068-55-9
Rhodium (III) Nitrate Solution, ca. 10% (wt/ wt) Rh in 20-25 wt% HNO3 7697-37-2
Allylmagnesium bromide, 1m solution in diethylether 60-29-7
Titanium diisopropoxide bis(2,4-pentanedionate), 75 wt% in 2-propanol 67-63-0
Osmium Tetroxide, 4 wt% Solution in Water 7732-18-5
Lithium Cyanide, 0.5M Solution in N,N-Dimethylformamide 2408-36-8
Methylmagnesium bromide, 3M solution in diethyl ether 75-16-1
8-Hydroxy-5-Nitroquinoline, 96% 4008-48-4
Ethylmagnesium bromide, 3m solution in diethyl ether 925-90-6
Polyepichlorohydrin, Average MW ca. 700.000 (GPC) 24969-06-0
(+/-)-2-Phenylcycloheptanone, 99% 14996-78-2
4'-Chloro-2,2':6',2''-Terpyridine, 99% 128143-89-5
(3,5-Dimethoxyphenyl)acetic acid, 98% 4670-10-4
2,4-Dimethylpyrrole, 97% 625-82-1
O-Eugenol, 98% 579-60-2
2-(Bromomethyl)-2-(Hydroxymethyl)-1,3-Propanediol, 99% 19184-65-7
4,4'-Dipyridyl N,N'-Dioxide Dihydrate, 98%
2,2'-Dipyridyl N,N'-Dioxide, 98% 7275-43-6
Ethyl Thiooxamate, 95% 16982-21-1
2',4'-Dihydroxy-3'-Methylpropiophenone, 98 % 63876-46-0
Oleylamine, 97% primary amine-value approx . c18-content 80-90% 112-90-3
2-Hydroxy-4-Methyl-3-Nitropyridine, 98% 21901-18-8
2-Hydroxy-4-Methyl-5-Nitropyridine, 98% 21901-41-7
2-Amino-4-Methyl-5-Nitropyridine, 98% 21901-40-6
2-Amino-4-Methyl-3-Nitropyridine, 98% 6635-86-5
Tetrabutylammonium difluorotriphenyl stannate 139353-88-1
Triphenyltin fluoride 379-52-2
(4-Hydroxyphenyl)-2-Propionic Acid 938-96-5
D,l-1-aminoindane-1-carboxylic acid
N-Boc-d,l-1-Aminoindane-1-Carboxylic Acid
N-fmoc-d,l-1-aminoindane-1-carboxylic acid
N-boc-d-1,2,3,4-tetrahydroisoquinoline-3-c arboxylic acid
N-fmoc-d-1,2,3,4-tetrahydroisoquinoline-3- carboxylic acid
N-boc-d-1,2,3,4-tetrahydro-beta-carboline- 3-carboxylic acid
N-Boc-2-Aminoindane-2-Carboxylic Acid
N-fmoc-d,l-2-aminotetralin-2-carboxylic acid
2-Chloro-4-Hydroxybenzoic Acid Hydrate, 98 % (On the Dried Substance) 56363-84-9
Methyl stearate, mixture of homologs 112-39-0
4-Bromophenol, 97% (GC) 106-41-2
1,1,1,5,5,5-Hexafluoroacetylacetone, 96% 1522-22-1
Methylurea, 97% 598-50-5
2-Methylbutyraldehyde, 95% 96-17-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net