Search   
MSDS 
:
 Titanium diisopropoxide bis(2,4-pentanedionate), 75 wt% in 2-propanol
CAS 
:
 67-63-0
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 67-63-0 |Isopropyl alcohol | 25 | 200-661-7 |
|----------------|--------------------------------------|----------|-----------|
| 17927-72-9 |Titanium diisopropoxide bis(2,4-pentan| 75 | 241-866-1 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause kidney damage. The toxicological properties of
this substance have not been fully investigated. Ingestion of large
amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Aspiration may lead
to pulmonary edema. Vapors may cause dizziness or suffocation. Can
produce delayed pulmonary edema. May cause burning sensation in the
chest.
Chronic:
Effects may be delayed. May cause kidney damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT get water inside
containers. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers. A vapor suppressing foam may be
used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Keep away from heat,
sparks and flame. Avoid ingestion and inhalation. Use with adequate
ventilation. Do not allow contact with water. Wash clothing before
reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames. Keep from
contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 67-63-0:
United Kingdom, WEL - TWA: 400 ppm TWA; 999 mg/m3 TWA
United Kingdom, WEL - STEL: 500 ppm STEL; 1250 mg/m3 STEL
United States OSHA: 400 ppm TWA; 980 mg/m3 TWA
Belgium - TWA: 400 ppm VLE; 997 mg/m3 VLE
Belgium - STEL: 500 ppm VLE; 1248 mg/m3 VLE
France - VLE: 400 ppm VLE; 980 mg/m3 VLE
Germany: 200 ppm TWA; 500 mg/m3 TWA
Japan: 400 ppm Ceiling; 980 mg/m3 Ceiling
Malaysia: 400 ppm TWA; 983 mg/m3 TWA
Netherlands: 250 ppm MAC; 650 mg/m3 MAC
Russia: 10 mg/m3 TWA
Spain: 400 ppm VLA-ED; 998 mg/m3 VLA-ED
Spain: 500 ppm VLA-EC; 1250 mg/m3 VLA-EC
CAS# 17927-72-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 12 deg C ( 53.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9950g/cm3
Molecular Formula: C16H28O6Ti
Molecular Weight: 364.30

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 67-63-0: NT8050000
CAS# 17927-72-9 unlisted.
LD50/LC50:
CAS# 67-63-0: Draize test, rabbit, eye: 100 mg Severe; Draize test,
rabbit, eye: 10 mg Moderate; Draize test, rabbit, eye: 100 mg/24H
Moderate; Draize test, rabbit, skin: 500 mg Mild; Inhalation, mouse:
LC50 = 53000 mg/m3; Inhalation, rat: LC50 = 16000 ppm/8H; Inhalation,
rat: LC50 = 72600 mg/m3; Oral, mouse: LD50 = 3600 mg/kg; Oral, mouse:
LD50 = 3600 mg/kg; Oral, rabbit: LD50 = 6410 mg/kg; Oral, rat: LD50 =
5045 mg/kg; Oral, rat: LD50 = 5000 mg/kg; Skin, rabbit: LD50 = 12800
mg/kg.
CAS# 17927-72-9.
Carcinogenicity:
Isopropyl alcohol -
Not listed by ACGIH, IARC, or NTP.
Titanium diisopropoxide bis(2,4-pentanedionate) -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 7 Keep container tightly closed.
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 67-63-0: 1
CAS# 17927-72-9: No information available.
Canada
CAS# 67-63-0 is listed on Canada's DSL List.
CAS# 17927-72-9 is listed on Canada's DSL List.
CAS# 67-63-0 is listed on Canada's Ingredient Disclosure List.
CAS# 17927-72-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 67-63-0 is listed on the TSCA inventory.
CAS# 17927-72-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 11 Highly flammable.
R 36 Irritating to eyes.
R 67 Vapours may cause drowsiness and dizziness.
MSDS Creation Date: 6/24/1999 Revision #4 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lutetium, powder, ca. 40 mesh, 99.9% 7439-94-3
Platinum, foil, 0.025mm thick, 99.99% 7440-06-4
Platinum, powder, 0.8-2.2 micron, 99.9% 7440-06-4
Platinum, powder, 0.27-0.47 micron, 99.9% 7440-06-4
Scandium, Powder, -40 Mesh, 99.9+% 7440-20-2
Palladium foil, 99.9+% 7440-05-3
Bis(Pentamethylcyclopentadienyl)Ruthenium 84821-53-4
Phenylmagnesium bromide, 3m solution in diethyl ether 100-58-3
Isopropylmagnesium chloride, 2.0 m solutio n in diethyl ether 1068-55-9
Rhodium (III) Nitrate Solution, ca. 10% (wt/ wt) Rh in 20-25 wt% HNO3 7697-37-2
Allylmagnesium bromide, 1m solution in diethylether 60-29-7
Titanium diisopropoxide bis(2,4-pentanedionate), 75 wt% in 2-propanol 67-63-0
Osmium Tetroxide, 4 wt% Solution in Water 7732-18-5
Lithium Cyanide, 0.5M Solution in N,N-Dimethylformamide 2408-36-8
Methylmagnesium bromide, 3M solution in diethyl ether 75-16-1
8-Hydroxy-5-Nitroquinoline, 96% 4008-48-4
Ethylmagnesium bromide, 3m solution in diethyl ether 925-90-6
Polyepichlorohydrin, Average MW ca. 700.000 (GPC) 24969-06-0
(+/-)-2-Phenylcycloheptanone, 99% 14996-78-2
4'-Chloro-2,2':6',2''-Terpyridine, 99% 128143-89-5
(3,5-Dimethoxyphenyl)acetic acid, 98% 4670-10-4
2,4-Dimethylpyrrole, 97% 625-82-1
O-Eugenol, 98% 579-60-2
2-(Bromomethyl)-2-(Hydroxymethyl)-1,3-Propanediol, 99% 19184-65-7
4,4'-Dipyridyl N,N'-Dioxide Dihydrate, 98%
2,2'-Dipyridyl N,N'-Dioxide, 98% 7275-43-6
Ethyl Thiooxamate, 95% 16982-21-1
2',4'-Dihydroxy-3'-Methylpropiophenone, 98 % 63876-46-0
Oleylamine, 97% primary amine-value approx . c18-content 80-90% 112-90-3
2-Hydroxy-4-Methyl-3-Nitropyridine, 98% 21901-18-8
2-Hydroxy-4-Methyl-5-Nitropyridine, 98% 21901-41-7
2-Amino-4-Methyl-5-Nitropyridine, 98% 21901-40-6
2-Amino-4-Methyl-3-Nitropyridine, 98% 6635-86-5
Tetrabutylammonium difluorotriphenyl stannate 139353-88-1
Triphenyltin fluoride 379-52-2
(4-Hydroxyphenyl)-2-Propionic Acid 938-96-5
D,l-1-aminoindane-1-carboxylic acid
N-Boc-d,l-1-Aminoindane-1-Carboxylic Acid
N-fmoc-d,l-1-aminoindane-1-carboxylic acid
N-boc-d-1,2,3,4-tetrahydroisoquinoline-3-c arboxylic acid
N-fmoc-d-1,2,3,4-tetrahydroisoquinoline-3- carboxylic acid
N-boc-d-1,2,3,4-tetrahydro-beta-carboline- 3-carboxylic acid
N-Boc-2-Aminoindane-2-Carboxylic Acid
N-fmoc-d,l-2-aminotetralin-2-carboxylic acid
2-Chloro-4-Hydroxybenzoic Acid Hydrate, 98 % (On the Dried Substance) 56363-84-9
Methyl stearate, mixture of homologs 112-39-0
4-Bromophenol, 97% (GC) 106-41-2
1,1,1,5,5,5-Hexafluoroacetylacetone, 96% 1522-22-1
Methylurea, 97% 598-50-5
2-Methylbutyraldehyde, 95% 96-17-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net