Search   
MSDS 
:
 2-Methylbutyraldehyde, 95%
CAS 
:
 96-17-3
SYNONYMS 
:
 2-Methylbutanal
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 96-17-3 |2-Methylbutyraldehyde | 95% | 202-485-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and
skin.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation. Vapors may cause dizziness
or suffocation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Use agent most appropriate to
extinguish fire. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep away from heat,
sparks and flame. Avoid ingestion and inhalation. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 96-17-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: unpleasant odor
pH: Not available.
Vapor Pressure: 50 hPa @20 deg C
Viscosity: 0.6 mPas 20 deg C
Boiling Point: 90 - 92 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: 240 deg C ( 464.00 deg F)
Flash Point: -5 deg C ( 23.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: .8040g/cm3
Molecular Formula: C5H10O
Molecular Weight: 86.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to air, excess
heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, reducing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 96-17-3: ES3400000
LD50/LC50:
CAS# 96-17-3: Dermal, guinea pig: LD50 = >20 gm/kg; Draize test,
rabbit, eye: 500 mg/24H Severe; Draize test, rabbit, eye: 500 mg/24H
Mild; Inhalation, rat: LC50 = 14000 ppm/4H; Oral, rat: LD50 = 6400
mg/kg; Skin, rabbit: LD50 = 5730 uL/kg.
Carcinogenicity:
2-Methylbutyraldehyde -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: LC50=740 mg 1-1; 96 hour

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ALDEHYDES, N.O.S.*
Hazard Class: 3
UN Number: 1989
Packing Group: II
IMO
Shipping Name: ALDEHYDES, N.O.S.
Hazard Class: 3.2
UN Number: 1989
Packing Group: II
RID/ADR
Shipping Name: ALDEHYDES, FLAMMABLE, N.O.S.
Hazard Class: 3
UN Number: 1989
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 96-17-3: No information available.
Canada
CAS# 96-17-3 is listed on Canada's DSL List.
CAS# 96-17-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 96-17-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/04/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Lutetium, powder, ca. 40 mesh, 99.9% 7439-94-3
Platinum, foil, 0.025mm thick, 99.99% 7440-06-4
Platinum, powder, 0.8-2.2 micron, 99.9% 7440-06-4
Platinum, powder, 0.27-0.47 micron, 99.9% 7440-06-4
Scandium, Powder, -40 Mesh, 99.9+% 7440-20-2
Palladium foil, 99.9+% 7440-05-3
Bis(Pentamethylcyclopentadienyl)Ruthenium 84821-53-4
Phenylmagnesium bromide, 3m solution in diethyl ether 100-58-3
Isopropylmagnesium chloride, 2.0 m solutio n in diethyl ether 1068-55-9
Rhodium (III) Nitrate Solution, ca. 10% (wt/ wt) Rh in 20-25 wt% HNO3 7697-37-2
Allylmagnesium bromide, 1m solution in diethylether 60-29-7
Titanium diisopropoxide bis(2,4-pentanedionate), 75 wt% in 2-propanol 67-63-0
Osmium Tetroxide, 4 wt% Solution in Water 7732-18-5
Lithium Cyanide, 0.5M Solution in N,N-Dimethylformamide 2408-36-8
Methylmagnesium bromide, 3M solution in diethyl ether 75-16-1
8-Hydroxy-5-Nitroquinoline, 96% 4008-48-4
Ethylmagnesium bromide, 3m solution in diethyl ether 925-90-6
Polyepichlorohydrin, Average MW ca. 700.000 (GPC) 24969-06-0
(+/-)-2-Phenylcycloheptanone, 99% 14996-78-2
4'-Chloro-2,2':6',2''-Terpyridine, 99% 128143-89-5
(3,5-Dimethoxyphenyl)acetic acid, 98% 4670-10-4
2,4-Dimethylpyrrole, 97% 625-82-1
O-Eugenol, 98% 579-60-2
2-(Bromomethyl)-2-(Hydroxymethyl)-1,3-Propanediol, 99% 19184-65-7
4,4'-Dipyridyl N,N'-Dioxide Dihydrate, 98%
2,2'-Dipyridyl N,N'-Dioxide, 98% 7275-43-6
Ethyl Thiooxamate, 95% 16982-21-1
2',4'-Dihydroxy-3'-Methylpropiophenone, 98 % 63876-46-0
Oleylamine, 97% primary amine-value approx . c18-content 80-90% 112-90-3
2-Hydroxy-4-Methyl-3-Nitropyridine, 98% 21901-18-8
2-Hydroxy-4-Methyl-5-Nitropyridine, 98% 21901-41-7
2-Amino-4-Methyl-5-Nitropyridine, 98% 21901-40-6
2-Amino-4-Methyl-3-Nitropyridine, 98% 6635-86-5
Tetrabutylammonium difluorotriphenyl stannate 139353-88-1
Triphenyltin fluoride 379-52-2
(4-Hydroxyphenyl)-2-Propionic Acid 938-96-5
D,l-1-aminoindane-1-carboxylic acid
N-Boc-d,l-1-Aminoindane-1-Carboxylic Acid
N-fmoc-d,l-1-aminoindane-1-carboxylic acid
N-boc-d-1,2,3,4-tetrahydroisoquinoline-3-c arboxylic acid
N-fmoc-d-1,2,3,4-tetrahydroisoquinoline-3- carboxylic acid
N-boc-d-1,2,3,4-tetrahydro-beta-carboline- 3-carboxylic acid
N-Boc-2-Aminoindane-2-Carboxylic Acid
N-fmoc-d,l-2-aminotetralin-2-carboxylic acid
2-Chloro-4-Hydroxybenzoic Acid Hydrate, 98 % (On the Dried Substance) 56363-84-9
Methyl stearate, mixture of homologs 112-39-0
4-Bromophenol, 97% (GC) 106-41-2
1,1,1,5,5,5-Hexafluoroacetylacetone, 96% 1522-22-1
Methylurea, 97% 598-50-5
2-Methylbutyraldehyde, 95% 96-17-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net