**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 623-04-1 |4-Aminobenzyl alcohol | 99 | 210-767-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
No data found on whether or not this chemical would be likely to
cause an allergic skin reaction.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
May cause methemoglobinemia, which is characterized by
chocolate-brown colored blood, headache, weakness, dizziness, breath
shortness, cyanosis (bluish skin due to deficient oxygenation of
blood), rapid heart rate, unconsciousness and possible death.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid breathing dust.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 623-04-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystalline powder
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 60 - 63 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H9NO
Molecular Weight: 123.15
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat, prolonged exposure to air.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 623-04-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Aminobenzyl alcohol -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 623-04-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 623-04-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 623-04-1 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/30/2000 Revision #1 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
4-Cyanophenyl isothiocyanate, 98%
| 2719-32-6 |
|
Chloro(cyclopentadienyl)(triphenylphosphine)nickel(II)
| 0-01-1 |
|
Chitosan
| 9012-76-4 |
|
Calcium Chloride, Anhydrous Powder, 96%
| 10043-52-4 |
|
1,2-Bis(2-chloroethoxy)ethane, 97%
| 112-26-5 |
|
Bis(pentamethylcyclopentadienyl)chromium
| 74507-61-2 |
|
Bis(benzene)chromium
| 1271-54-1 |
|
1'-Acetonaphthone, 95%
| 941-98-0 |
|
(Ethylcyclopentadienyl)(triphenylphosphine) copper(I)
| 308847-89-4 |
|
1,2,4-Benzenetricarboxylic acid, 98%
| 528-44-9 |
|
[2.2]Paracyclophane, 98%
| 1633-22-3 |
|
Diphenylmethylbismuthine
| 74724-75-7 |
|
P-Tolylacetic Acid, 99%
| 622-47-9 |
|
Tris(2-methoxyphenyl)bismuthine
| 83724-41-8 |
|
Benzophenone
| 119-61-9 |
|
Tris(cyclopentadienyl)cerium
| 1298-53-9 |
|
Tris(cyclopentadienyl)erbium
| 39330-74-0 |
|
Sodium hydroxide, 0.2 N solution
| 1310-73-2 |
|
1-Naphthylacetic acid, 95%
| 86-87-3 |
|
Benzotriazole
| 95-14-7 |
|
Cinnamyl Acetate, 99%
| 103-54-8 |
|
alpha-Ionone, synthetic
| 127-41-3 |
|
4-Aminobenzyl alcohol, 99%
| 623-04-1 |
|
5-Bromo-6-chloro-3-indoxyl-N-acetyl-beta-D-glucosaminide
| 5609-91-6 |
|
5-Bromo-4-chloro-3-indoxyl-N-acetyl-beta-D-glucosaminide
| 4264-82-8 |
|
2,5-Dimethylphenylhydrazine hydrochloride
| 56737-78-1 |
|
2-Bromophenylacetonitrile, 98%
| 19472-74-3 |
|
Hydroethidine
| 38483-26-0 |
|
(R)-(-)-Epichlorohydrin, 99%
| 106-89-8 |
|
(S)-(+)-Epichlorohydrin, 98%
| 106-89-8 |
|
3-Chloro-2-nitrotoluene
| 5367-26-0 |
|
3-Chloro-4-nitrotoluene
| 38939-88-7 |
|
5-Chloro-2-nitrotoluene, 98%
| 5367-28-2 |
|
3,5-Dichlorophenylhydrazine hydrochloride, 93%
| 63352-99-8 |
|
Acriflavine hydrochloride
| 8063-24-9 |
|
Tributylbismuthine
| 3692-81-7 |
|
Dicarbonyl(pentamethylcyclopentadienyl)chromium dimer
| 37299-12-0 |
|
Dicarbonylcyclopentadienylcobalt
| 12078-25-0 |
|
N,N-Dimethyl-p-Phenylenediamine Monohydrochloride, 90-95%
| 2052-46-2 |
|
Merrifield polymer resin, 1% crosslinked with DVB, 1.4-1.7 mmolCl/g,
| 9036-15-1 |
|
Merrifield polymer resin, 1% crosslinked with DVB, 1.9-2.1 mmol Cl/g,
| 9036-15-1 |
|
Merrifield polymer resin, 1% crosslinked with DVB, 2.8-3.0 mmol Cl/g,
| 9036-15-1 |
|
Merrifield polymer resin, 1% crosslinked with DVB, 1.6-1.8 mmol Cl/g,
| 9036-15-1 |
|
Benzoyl chloride
| 98-88-4 |
|
Merrifield polymer resin, 1% crosslinked with DVB, 1.8-2.0 mmol Cl/g,
| 9036-15-1 |
|
Merrifield polymer resin, 1% crosslinked with DVB, 2.5-3.0 mmol Cl/g,
| 9036-15-1 |
|
Merrifield polymer resin, 2% crosslinked with DVB, 0.6-0.8 mmol Cl/g,
| 9036-15-1 |
|
Benzyl acetate, 99+%
| 140-11-4 |
|
Merrifield polymer resin, 2% crosslinked with DVB, 1.4-1.6 mmol Cl/g,
| 9036-15-1 |
|
Merrifield polymer resin, 2% crosslinked with DVB, 2.0-2.2 mmol Cl/g,
| 9036-15-1 |
|
|