Search   
MSDS 
:
 Bis(pentamethylcyclopentadienyl)chromium
CAS 
:
 74507-61-2
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 74507-61-2 |Bis(pentamethylcyclopentadienyl)chromi| ca. 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.Light
sensitive.Air sensitive.The toxicological properties of this material
have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
Harmful if inhaled. May cause respiratory tract irritation. The
toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Place under an inert atmosphere.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid
contact with eyes, skin, and clothing. Keep container tightly
closed. Avoid ingestion and inhalation. Store protected from light.
Store protected from air. Use and store under argon.
Storage:
Store in a tightly closed container. Deep freeze (below -20C). Do
not expose to air. Store protected from light. Store under argon.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 74507-61-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C20H30Cr
Molecular Weight: 322.206

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Air sensitive. Light sensitive.
Conditions to Avoid:
Light, dust generation, exposure to air.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 74507-61-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Bis(pentamethylcyclopentadienyl)chromium -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 74507-61-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 74507-61-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 74507-61-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/26/2000 Revision #3 Date: 2/14/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Cyanophenyl isothiocyanate, 98% 2719-32-6
Chloro(cyclopentadienyl)(triphenylphosphine)nickel(II) 0-01-1
Chitosan 9012-76-4
Calcium Chloride, Anhydrous Powder, 96% 10043-52-4
1,2-Bis(2-chloroethoxy)ethane, 97% 112-26-5
Bis(pentamethylcyclopentadienyl)chromium 74507-61-2
Bis(benzene)chromium 1271-54-1
1'-Acetonaphthone, 95% 941-98-0
(Ethylcyclopentadienyl)(triphenylphosphine) copper(I) 308847-89-4
1,2,4-Benzenetricarboxylic acid, 98% 528-44-9
[2.2]Paracyclophane, 98% 1633-22-3
Diphenylmethylbismuthine 74724-75-7
P-Tolylacetic Acid, 99% 622-47-9
Tris(2-methoxyphenyl)bismuthine 83724-41-8
Benzophenone 119-61-9
Tris(cyclopentadienyl)cerium 1298-53-9
Tris(cyclopentadienyl)erbium 39330-74-0
Sodium hydroxide, 0.2 N solution 1310-73-2
1-Naphthylacetic acid, 95% 86-87-3
Benzotriazole 95-14-7
Cinnamyl Acetate, 99% 103-54-8
alpha-Ionone, synthetic 127-41-3
4-Aminobenzyl alcohol, 99% 623-04-1
5-Bromo-6-chloro-3-indoxyl-N-acetyl-beta-D-glucosaminide 5609-91-6
5-Bromo-4-chloro-3-indoxyl-N-acetyl-beta-D-glucosaminide 4264-82-8
2,5-Dimethylphenylhydrazine hydrochloride 56737-78-1
2-Bromophenylacetonitrile, 98% 19472-74-3
Hydroethidine 38483-26-0
(R)-(-)-Epichlorohydrin, 99% 106-89-8
(S)-(+)-Epichlorohydrin, 98% 106-89-8
3-Chloro-2-nitrotoluene 5367-26-0
3-Chloro-4-nitrotoluene 38939-88-7
5-Chloro-2-nitrotoluene, 98% 5367-28-2
3,5-Dichlorophenylhydrazine hydrochloride, 93% 63352-99-8
Acriflavine hydrochloride 8063-24-9
Tributylbismuthine 3692-81-7
Dicarbonyl(pentamethylcyclopentadienyl)chromium dimer 37299-12-0
Dicarbonylcyclopentadienylcobalt 12078-25-0
N,N-Dimethyl-p-Phenylenediamine Monohydrochloride, 90-95% 2052-46-2
Merrifield polymer resin, 1% crosslinked with DVB, 1.4-1.7 mmolCl/g, 9036-15-1
Merrifield polymer resin, 1% crosslinked with DVB, 1.9-2.1 mmol Cl/g, 9036-15-1
Merrifield polymer resin, 1% crosslinked with DVB, 2.8-3.0 mmol Cl/g, 9036-15-1
Merrifield polymer resin, 1% crosslinked with DVB, 1.6-1.8 mmol Cl/g, 9036-15-1
Benzoyl chloride 98-88-4
Merrifield polymer resin, 1% crosslinked with DVB, 1.8-2.0 mmol Cl/g, 9036-15-1
Merrifield polymer resin, 1% crosslinked with DVB, 2.5-3.0 mmol Cl/g, 9036-15-1
Merrifield polymer resin, 2% crosslinked with DVB, 0.6-0.8 mmol Cl/g, 9036-15-1
Benzyl acetate, 99+% 140-11-4
Merrifield polymer resin, 2% crosslinked with DVB, 1.4-1.6 mmol Cl/g, 9036-15-1
Merrifield polymer resin, 2% crosslinked with DVB, 2.0-2.2 mmol Cl/g, 9036-15-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net