AMERON INTERNATIONAL PROTECTIV -- PSX 892HS GRAY
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJHBR
MSDS NAME: PSX 892HS GRAY
Responsible Party
Name: AMERON INTERNATIONAL PROTECTIVE COATINGS GROUP
Address: 201 NORTH BERRY ST
City: BREA CA 92821
Info Phone: 714-529-1951
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Resp. Party Other MSDS No.: 892HSS20000
Preparer's Name: H. KLINE
Chemtrec IND/Phone: (800)424-9300
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: AMERON INTERNATIONAL PROTECTIVE COATINGS GROUP
Address: 201 NORTH BERRY ST.
City: BREA CA 92821
Phone: 714-529-1951
Name: AMERON PROTECTIVE COATINGS
Address: 201 NORTH BERRY STREET
Box: 1020
City: BREA CA 92622-1020
Phone: 714-529-1951
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: SEE INGREDIENTS.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: YES
IARC: YES
OSHA: NO
Effects of Exposure: VAP/SPRAY MIST OR SPATTERED MATL CAN BE HARMFUL.
IRRITATING TO EYES, SKIN, & IF INHALED, TO NOSE & THROAT.
EXCESS/PRLNG INHAL CAN CAUSE HDCH, NAUS/DIZZ. RPTD & PRLNG OCCUP OVEREXP
TO SOLVS IS ASSOC W/ PERM BRAIN & NERV SYS DMG. INTENTIONAL ABUSE,
MISUSE/OTHER MASSIVE EXPOS TO SOLVS MAY CAUSE MULTIPLE ORGAN DMG &/OR
DEATH. OVEREXP (PRLNG/RPTD USE) CAN AGGRAVATE/ACCENTUATE ANY OF THESE EFTS.
SKIN: SE V IRRITANT. BURNS. SENSIT/ALLERGIC RXN, SUCH AS RASH/HIVES. CAN BE
ABSORBED THRU SKIN. CAN CAUSE DEFAT & DRYING. INHAL: SEV IRRITANT.
DELAYED LUNG INJURY. RESP SENSIT & ALLERGIC RXN SUCH AS ASTHMA. CN S DMG.
(EFTS OF OVEREXP)
Explanation Of Carcinogenicity: SILICA, CRYSTALLINE-QUARTZ: IARC MONOGRAPHS,
VOLUME 68, 1998: GROUP 1. NTP 8TH ANNUAL REPORT ON CARCINOGENS, 1998:
REASONABLY ANTICIPATED TO BE HUMAN CARCINOGEN. HUMAN: LUNG.
Signs And Symptions Of Overexposure: HLTH HAZ: WELDING FUMES CAN CAUSE WELDING
FUME FEVER. CHEM PNEUM. HIGH VAP CONCS MAY CAUSE DROW. EYES: SEV IRRITANT.
CORNEAL INJURY. METHANOL, IF SWALLOWED, CAN CAUSE EYE DMG & BLINDNESS.
INGEST: CAN BE FATAL IF SWALLOWED. ASPIR INTO LUNGSCAN DMG LUNGS & CAUSE
CHEM PNEUM. TARGET ORGANS: KIDNEYS, LIVER, LUNGS, SKIN, EYES, STOM, SPLEEN,
CNS. TOLUENE APPEARS ON THE NAVY OCCUP CHEM REPRO HAZ LIST. SEE K
CONSULTATION FROM APPROP HLTH PROFESSIONALS CONCERNING LATEST HAZ LIST INFO
& SAFE HNDLG & EXPOS INFO (FP N).
Medical Cond Aggravated By Exposure: SKIN, RESPIRATORY, ALLERGIES.
First Aid: INHALATION: REMOVE TO FRESH AIR. RESTORE NORMAL BREATHING. TREAT
SYMPTOMATICALLY. SEE MD. SKIN: WASH THOROUGHLY WITH SOAP AND WATER. REMOVE
CONTAMINATED CLOTHING. CONSULT MD IF IRRITATION PERSISTS. EY ES: FLUSH
IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES AND GET MEDICAL
ATTENTION. INGESTION: DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. DO NOT INDUCE VOMITING (UNLESS
METHANOL, LISTED IN INGREDIENTS SECTION). CONSULT MD OR POISON CONTROL CENTER
IMMEDIATELY. TREAT SYMPTOMATICALLY. AFTER FLUSHING EYES FOR 15 MINUTES, GET
IMMEDIATE MEDI CAL ATTENTION FROM AN OPHTHALMOLOGIST.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNIT. AVOID BRTHG VAPS. VENT
AREA. USE ABSORB, INERT, CLEANUP MATLS (DO NOT USE SAWDUST). REMOVE ABSORB
MATL W/NON-SPKG TOOLS. PLACE IN SEPARATE CONTR. DO NOT PLACE UNREACTED, M
IXED MATL CONTAINING ALUMINUM/ZINC IN SEALED SCRAP RECEPTACLE CONTAINING
WATER/OTHER MIXED MATL AS GASSING MAY CAUSE CONTR TO BURST. KEEP OUT OF
SEWERS & WATERWAYS. (SUP DAT)
Waste Disposal Methods: EPA WASTE #: D001. PLACE IN SEPARATE, APPROPRIATE,
CLOSED CONTAINER I/A/W ALL APPLIC LOC, STATE, & FED REGS. THIS MATL HAS
NOT BEEN TESTED BY TOXICITY CHARACT LEACHING PROCEDURE (TCLP). DO NOT PLACE U
NREACTED, MIXED MATL CONTAINING ALUMINUM/ZINC IN SEALED SCRAP RECEPTACLE
CONTAINING WATER/OTHER MIXE D MATL AS GASSING MAY CAUSE CONTAINER TO BURST.
Handling And Storage Precautions: KEEP CONTAINER CLOSED, UPRIGHT WHEN NOT IN
USE. STORE IN COOL, DRY, WELL-VENTILATED AREA. AVOID PROLONGED STORAGE
TEMPERATURES ABOVE 100F. USE CAUTION WHEN POURING. AVOID BREATHING SANDING
DUST. DO NO T WELD OR FLAME CUT ON EMPTY CONTAINER.
Other Precautions: MATERIAL IS HYGROSCOPIC, KEEP CONTAINERS TIGHTLY SEALED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point: =32.8C, 91.F
Lower Limits: 0.9%
Upper Limits: 23.0%
Extinguishing Media: FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). WATER MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT
PRESSURE BUILD-UP OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard: OSHA: FLAMMABLE-CLASS IC. LOWEST FLASHING
SOLVENT: 64742-89-8. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME
HEAT AND PRESSURE BUILD-UP. MAY PRODUCE A FLOATING FIRE HAZARD. ISOLATE FROM
ELECTR ICAL EQUIPMENT, SPARKS, HEAT AND OPEN FLAME. VAPORS MAY SPREAD LONG
DISTANCES, CAUSE FLASH FIRE OR IGNITE EXPLOSIVELY.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WEAR NIOSH CERTIFIED RESP DESIGNED TO REMOVE
COMBINATION OF PARTICULATES (DUST/SPRAY MIST) & VAP. WHEN BRUSHING,
ROLLING/SPREADING, SELECT APPROP RESP PROT FOR CNDTNS. FOR SPECIFIC CNDTNS,
REFER TO CU RRENT "NIOSH POCKET GUIDE TO CHEM HAZS". IN CONFINED/RESTRICTED
VENT AREAS, USE NIOSH APPRVD AIR-LINE RESPS/HOODS. (SUP DAT)
Ventilation: IMPLEMENT ADMIN & ENGINEERING CTLS TO REDUCE EXPOS. PROVIDE
SUFFICIENT VENT IN VOL & PATTERN TO KEEP AIR CONTAMINANT CONCS BELOW TLV
LIMITS. (OTHER INFO)
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPRVD EMER EYEWASH & DELUGE SHOWER (FP N).
DEPENDENT UPON APPLICATION METH, WEAR RESIST COVERALLS & SHOE COVERINGS TO
PVNT SKIN CONT. CONSULT 29 CFR 1910.132, 133, 136, 138; (SUP DAT)
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING AND BEFORE EATING,
SMOKING OR USING TOILET. LAUNDER CONTAMINATED CLOTHING BEFORE USE. DESTROY
CONTAMINATED LEATHER AND ABSORBENT SHOES WHICH CANNOT BE DECONTAMINATED.
Supplemental Safety and Health: SPILL PROC: IF ENTRY IS THREATENED/OCCURS,
NOTIFY LOC AUTH. RESP PROT: REFER TO 29 CFR, OSHA PARTS 1910.134 & 1915
FOR COATING OPERATIONS; PART 1910.146 CONFINED SPACES; ANSI Z88.2, PRACTICES
FOR RESP PROT; 42 CFR, PART 84 PARTICULATE RESPS. OTHER PROT EQUIP: ANSI
Z87.1, Z41. USE EXPLO & SPARK-PROOF EQUIP.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: >85.C, 185.F
B.P. Text: 185F-346F
Vapor Pres: SEE INGREDIENTS
Vapor Density: HVR/AIR
Spec Gravity: 1.33 (FP N)
Evaporation Rate & Reference: FASTER THAN BUTYL ACETATE
Solubility in Water: NO
Appearance and Odor: LIQUID WITH SOLVENT ODOR.
Percent Volatiles by Volume: 36.93
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT, OPEN FLAME, ARC OR SPARKS. WATER OR
MOISTURE.
Materials To Avoid: STRONG OXIDIZERS, ACIDS AND ALKALIES. WATER.
Hazardous Decomposition Products: BY FIRE, BURNING/WELDING: CARBON MONOXIDE,
CARBON DIOXIDE, NO*X. IRON OXIDE FUMES. ALDEHYDES. ALUMINUM OXIDE FUMES.
SILICON OXIDE FUMES. METHANOL. TOX GASES/FUMES. FORMALDEHYDE AT TEMPS > 300F
(150C).
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR UNDER NORMAL CONDITIONS.
=======================================================
Toxicological Information
=======================================================
Toxicological Information: SEE INGREDIENTS SECTION.
=======================================================
Ecological Information
=======================================================
Ecological: NO INFORMATION.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT PROPER SHIPPING NAME: PAINT. DOT HAZARD CLASS: 3.
HAZARD SUBCLASS: N/A. DOT UN/NA NUMBER: 1263. IMO: N/A. PACKING GROUP: III.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: THESE CHEMICALS ARE SUBJECT TO THE REPORTING
REQUIREMENTS OF SARA (40 CFR 355 AND 372): BLACK IRON MANGANESE OXIDE,
ALUMINUM FLAKE.
Federal Regulatory Information: THESE CHEMICALS ARE SUBJECT TO THE REPORTING
REQUIREMENTS OF HAPS (40 CFR 63): BLACK IRON MANGANESE OXIDE, TOLUENE. ALL
INGREDIENTS ARE ON TSCA INVENTORY OR ARE EXEMPT. U.S. FEDERAL REGULATIONS:
OSHA: HAZARDOUS BY DEFINITION OF HAZARD COMMUNICATION STANDARD (29 CFR
1910.1200). INTERNATIONAL REGULATIONS: CANADIAN W: THIS MSDS HAS BEEN
PREPARED IN COMPLIANCE WITH CONTROLLED PRODUCT REGULATIONS E XCEPT FOR USE OF
THE 16 HEADINGS. CANADIAN W CLASS: NO INFORMATION AVAILABLE.
State Regulatory Information: CALIFORNIA TITLE 26: 22-12000 (PROP 65). WARNING:
THIS PROD CONTAINS A CHEM KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER.
CALIFORNIA TITLE 26: 22-12000 (PROP 65). WARNING: THIS PROD CONTAINS A CHE M
KNOWN TO THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS/OTHER REPRO HARM. NEW
JERSEY RIGHT-TO-KNOW: THE FOLLOWING MATLS ARE NON-HAZ, BUT ARE AMONG TOP FIVE
COMPONENTS OF THIS PROD: NO NON-HAZ MATLS ARE AMONG TOP FIVE INGS.
PENNSYLVANIA RIGHT-TO-KNOW: THE FOLLOWING NON-HAZ INGS ARE PRESENT IN PROD
AT GREATER THAN 3%: NO NON-HAZ INGS ARE PRESENT AT GREATER THAN 3%.
=======================================================
Other Information
=======================================================
Other Information: VENTILATION: REMOVE WELDING OR FLAME CUTTING DECOMPOSITION
PRODUCTS; FOLLOW CURRENT ANSI Z49.1, "SAFETY IN WELDING AND CUTTING". REFER
TO 29 CFR PARTS 1910 & 1915, FOR COATING OPERATIONS; PART 1910.14 6,
CONFINED SPACES. MIXED VOC: 323.000 G/L. EPA MIXED VOC THIN VOC: 0.000 G/L.
THINNER: 65 @ 0.25 PINTS. WEIGHT PER GAL: 11.0836. PHOTOCHEMICALLY REACTIVE:
NO. /NFPA RATINGS: HEALTH: 2; FLAMMABILI TY: 3; REACTIVITY: 2. DATE PRINTED:
30 SEPTEMBER 1998.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PSX 892HS GRAY
Company: AMERON INTERNATIONAL PROTECTIVE COATINGS GROUP
Street: 201 NORTH BERRY ST.
City: BREA CA
Zipcode: 92821
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 06/30/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: FLAMMABLE. ACUTE: SKIN: SEVERE IRRITANT. BURNS. CAN BE
ABSORBED, CAUSE DEFATTING AND DRYING. INHALATION: SEVERE IRRITANT. DELAYED
LUNG INJURY. CNS DAMAGE. WELDING FUMES CAN CAUSE WELDING FUME FEVER. C
HEMICAL PNEUMONIA. HIGH VAPOR CONCENTRATIONS MAY CAUSE DROWSINESS. EYES:
SEVERE IRRITANT. CORNEAL INJURY. METHANOL, IF SWALLOWED, CAN CAUSE EYE DAMAGE
AND BLINDNESS. INGESTION: CAN BE FATAL IF SWALLOW ED. ASPIRATION INTO LUNGS
CAN DAMAGE LUNGS AND CAUSE CHEMICAL PNEUMONIA. CHRONIC: CANCER HAZARD.
CONTAINS MATERIAL LISTED AS A HUMAN LUNG CARCINOGEN (FP N). SKIN AND
RESPIRATORY SENSITIZATION, ALLERGI C REACTION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|