Search   
MSDS  : HR-200 EPOXY PASTE ADHESIVE HARDENER PART B
CAS  :
NAME  : *** proprietary ***
ADHESIVES TECHNOLOGY CORP -- HR-200 EPOXY PASTE ADHESIVE HARDENER PART B
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSVTX
MSDS NAME: HR-200 EPOXY PASTE ADHESIVE HARDENER PART B
Kit Part: Y
Responsible Party
Name: ADHESIVES TECHNOLOGY CORP
Address: 8041 S 228TH ST SUITE 101
City: KENT WA 98032
Info Phone: 206-850-2400
Emergency Phone Number: 206-850-2400
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ADHESIVE TECHNOLOGY CORP
Address: 4210 B STREET N.W. SUITE D
City: AUBURN WA 98001
Phone: 206-850-2400
Name: ADHESIVES TECHNOLOGY CORP
Address: 8041 S 228TH ST SUITE 101
City: KENT WA 98032
Phone: 206-850-2400
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: CONTACT WITH SKIN WILL CAUSE SEVERE BURNS. AVOID
BREATHING VAPORS.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: SKIN: WASH WITH WATERLESS HAND CLEANER THEN WARM SOAP AND WATER FOR
15 MINUTES, THEN APPLY A PROTECTIVE CREAM. REMOVE CONTAMINATED CLOTHING
IMMED, AND WASH SKIN. INHAL: REMOVE TO FRESH AIR. EYES: CALL A PHYSICIAN.
FLUSH WITH WARM WATER FORAT LEAST 15 MINUTES. INGEST: CALL MD IMMED (FP N).
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CLEAN UP WITH ABSORBENT MATERIAL. WASH AREA WITH
WARM, SOAPY WATER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL REGULATIONS.
Handling And Storage Precautions: AVOID ALL CONTACT WITH SKIN AND EYES. USE
PROTECTIVE CLOTHING, GLOVES, GOGGLES AT ALL TIMES.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: 200F,93C
Extinguishing Media: FOAM, CARBON DIOXIDE, FOG. DO NOT MIX/STORE WITH STRONG
OXIDANTS.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: AVOID BREATHING VAPORS.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN (FP N).
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EMERGENCY EYE WASH AND DELUGE SHOWER (FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
Solubility in Water: VERY LOW
Appearance and Odor: DARK GREEN/BLACK PASTE
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: NONE SPECIFIED BY MANUFACTURER.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: HR-200 EPOXY PASTE ADHESIVE HARDENER PART B
Assigned IND: Y
Company: ADHESIVES TECHNOLOGY CORP
Street: 8041 S 228TH ST SUITE 101
City: KENT WA
Zipcode: 98032
Health Emergency Phone: 206-850-2400
Label Required IND: Y
Date Of Label Review: 04/28/1983
Status Code: C
Label Date: 04/28/1983
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. AVOID OXIDIZERS. ACUTE: CONTACT W/SKIN
WILL CAUSE SEVERE BURNS. AVOID BREATHING VAPORS. CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
HR-200 EPOXY PASTE ADHESIVE HARDENER PART B
812B CPC (CIRCULATING PARTS CLNR)
ANTI-SEIZE HI-TEMP AEROSOL
POWER DRAIN OPENER 7664-93-9
NICKEL (BLACK) SOLUTION, SAS 5670
SEVIN 50% MANUFACTURING CONCENTRATE (SUPP DATA) 63-25-2
PLY 3 PROTECTIVE SKIN CREAM
EPOXYLITE #6203 PART A
EPOXYLITE #6203 PART B
PRESSURIZED DUSTER 16 OZ CANS 75-45-6
75-28-5
78-68-3
OPTI FLUID
OPTI PEN
POLYURETHANE MARINE ADHESIVE SEALANT (SUPP DATA)
1690 HIGH STRENGTH ADHESIVE (1PA)
SCOTCHLITE PROCESS COLOR RAPID DRY 883 BLUE
SCOTCHLITE PROCESS COLOR RAPID DRY 883T BLUE
CLAY STHRN FLOWTONE ST 50, 16-05839-00
MA 429, 4361000
NITRAVER 6 NITRATE REAGENT POWDER PILLOWS, 14120 7487-88-9
7790-62-7
36679-96-6
7778-77-0
7440-43-9
7757-82-6
NITRIVER 3 NITRITE REAGENT, 14078 7778-77-0
515-74-2
7790-62-7
129-96-4
36679-96-6
JET-MELT 3783-AE
1690 HIGH STRENGTH ADHESIVE (1PA)
PEEL-AWAY ST-1
PEEL-AWAY MASTIC REMOVER II
50ML HV, 7731 25852-47-5
18268-70-7
80-15-9
9004-36-8
102-82-9
ACTIVATED PINE TYPE DISINFECTANT 120-32-1
2429 NAPHTHA
XEA 9359.3 PART B
DRI-LOC ADHESIVE, 12402 7732-18-5
24448-20-2
25213-24-3
11138-66-2
50-00-0
9002-88-4
INDUSTRIAL PLASTER IG-100 68890-88-0
26499-65-0
1317-65-3
65997-15-1
1305-62-0
9004-62-0
9002-89-5
9005-25-8
9069-79-8
10043-01-3
994-36-5
87-69-4
69430-36-0
7558-80-7
9084-06-4
7778-80-5
9004-65-3
8061-52-7
304-59-6
126-73-8
PINE-QUAT DISINFECTANT CLEANER, 0237
100 PPM CARBON MONOXIDE 630-08-0
109-66-0
7782-44-7
7727-37-9
USCALRITE SPOT GUARD
MORTAR RESIN PRODUCT, 400
3127 HILCOTROL 64742-95-6
ARCTIC
37930 FORMULA 40 HERBICIDE (VERTAC)
ANTI-SEIZE, UNGAR 8001
GELLA 4441 REENTERABLE ENCAPSULATING COMPOUND 64742-18-3
68239-06-5
2082-79-3
69102-90-5
64742-18-3
CONDUCTIVE ADHESIVE CON RTV 1, 72-00002
CONDUCTIVE ADHESIVE CON RTV 1, 72-00002
HYSOL KS4008 PART A KA4008, KS4008 7440-22-4
25068-38-6
26447-14-3
HYSOL KS4008 PART B KB4008, KS4008 80-05-7
111-40-0
25068-38-6
PF-5060 3M BRAND PERFORMANCE FLUID 86508-42-1
PRONTO CA-5 INSTANT ADHESIVE 7085-85-0
80-62-6
123-31-9
SYNTA-LUBE, OL-216
SAVVYSOAP HEAVY DUTY SKIN CLEANSER
ALL DYMO DIAMOND COMPOUNDS 7782-40-3
9003-13-8
56-81-5
7631-86-9
ECO-STS SANDY BEIGE-STD TRAFFIC SYSTEM, 08556-15
6242 TONER 25767-47-9
1333-86-4
9003-07-4
84179-66-8
109125-50-0
109125-51-1
25869-00-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net