Search   
MSDS  : ANTI-SEIZE HI-TEMP AEROSOL
CAS  :
NAME  : *** proprietary ***
HILL MANUFACTURING INC -- ANTI-SEIZE HI-TEMP AEROSOL
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSVVB
MSDS NAME: ANTI-SEIZE HI-TEMP AEROSOL
Responsible Party
Name: HILL MANUFACTURING CO INC
Address: 1500 JONESBORO ROAD
City: ATLANTA GA 30315
Info Phone: 404-522-8364;404-588-4400
Emergency Phone Number: 404-522-8364;404-588-4400
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HILL MANUFACTURING CO INC
Address: 1500 JONESBORO DR
City: ATLANTA GA 30315
Phone: 404-522-8364
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EXCESSIVE PROLONGED INHALATION MAY RESULT IN DROWSINESS,
HEADACHES, NAUSEA, EYE AND LUNG IRRITATION.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INHAL: REMOVE TO FRESH AIR. SKIN: FLUSH WITH WATER. EYE: FLUSH WITH
WATER FOR AT LEAST 15 MINUTES. INGEST: SEE PHYSICIAN IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SOAK UP ON APPROPRIATE ABSORBENT MATERIAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: I/A/W LOCAL, FEDERAL AND STATE REGULATIONS.
Handling And Storage Precautions: DO NOT STORE WHERE TEMPERATURE EXCEEDS 120F.
Other Precautions: SEE LABEL.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: SUPP DATA
Extinguishing Media: FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE REQUIRED AS LONG AS NOT USED IN SMALL CLOSED AREA.
USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN (FP
N).
Ventilation: LOCAL EXHAUST: GENERAL VENTILATION IS ADEQUATE.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APRV CHEM WORK GOGG (FP N).
Other Protective Equipment: NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: SPEC GRAV: 1.394@75F(H2O=1). FL PT:
CONCENTRATE-NONE-SPRAY EXTREMELY FLAMMABLE.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: V3
Vapor Pres: 45PSIG@75F
Spec Gravity: SUPP DATA
Solubility in Water: NEGLIGIBLE
Appearance and Odor: GRAY VISCOUS LIQUID-MILD SWEETISH ODOR
Percent Volatiles by Volume: 67
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: DO NOT EXPOSE CAN TO HEAT OR TEMPERATURE ABOVE
120F.
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: ABNORMALLY HIGH TEMPERATURES-POSSIBLE TRACE
AMOUNTS OF PHOSGENE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ANTI-SEIZE HI-TEMP AEROSOL
Company: HILL MANUFACTURING CO INC
Street: 1500 JONESBORO DR
City: ATLANTA GA
Zipcode: 30315
Health Emergency Phone: 404-522-8364;404-588-4400
Label Required IND: Y
Date Of Label Review: 05/03/1993
Status Code: C
Label Date: 05/03/1993
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: DO NOT STORE WHERE TEMPERATURE EXCEEDS 120F. ACUTE:
EXCESSIVE PROLONGED INHALATION MAY RESULT IN DROWSINESS, HEADACHES, NAUSEA,
EYE AND LUNG IRRITATION. CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
HR-200 EPOXY PASTE ADHESIVE HARDENER PART B
812B CPC (CIRCULATING PARTS CLNR)
ANTI-SEIZE HI-TEMP AEROSOL
POWER DRAIN OPENER 7664-93-9
NICKEL (BLACK) SOLUTION, SAS 5670
SEVIN 50% MANUFACTURING CONCENTRATE (SUPP DATA) 63-25-2
PLY 3 PROTECTIVE SKIN CREAM
EPOXYLITE #6203 PART A
EPOXYLITE #6203 PART B
PRESSURIZED DUSTER 16 OZ CANS 75-45-6
75-28-5
78-68-3
OPTI FLUID
OPTI PEN
POLYURETHANE MARINE ADHESIVE SEALANT (SUPP DATA)
1690 HIGH STRENGTH ADHESIVE (1PA)
SCOTCHLITE PROCESS COLOR RAPID DRY 883 BLUE
SCOTCHLITE PROCESS COLOR RAPID DRY 883T BLUE
CLAY STHRN FLOWTONE ST 50, 16-05839-00
MA 429, 4361000
NITRAVER 6 NITRATE REAGENT POWDER PILLOWS, 14120 7487-88-9
7790-62-7
36679-96-6
7778-77-0
7440-43-9
7757-82-6
NITRIVER 3 NITRITE REAGENT, 14078 7778-77-0
515-74-2
7790-62-7
129-96-4
36679-96-6
JET-MELT 3783-AE
1690 HIGH STRENGTH ADHESIVE (1PA)
PEEL-AWAY ST-1
PEEL-AWAY MASTIC REMOVER II
50ML HV, 7731 25852-47-5
18268-70-7
80-15-9
9004-36-8
102-82-9
ACTIVATED PINE TYPE DISINFECTANT 120-32-1
2429 NAPHTHA
XEA 9359.3 PART B
DRI-LOC ADHESIVE, 12402 7732-18-5
24448-20-2
25213-24-3
11138-66-2
50-00-0
9002-88-4
INDUSTRIAL PLASTER IG-100 68890-88-0
26499-65-0
1317-65-3
65997-15-1
1305-62-0
9004-62-0
9002-89-5
9005-25-8
9069-79-8
10043-01-3
994-36-5
87-69-4
69430-36-0
7558-80-7
9084-06-4
7778-80-5
9004-65-3
8061-52-7
304-59-6
126-73-8
PINE-QUAT DISINFECTANT CLEANER, 0237
100 PPM CARBON MONOXIDE 630-08-0
109-66-0
7782-44-7
7727-37-9
USCALRITE SPOT GUARD
MORTAR RESIN PRODUCT, 400
3127 HILCOTROL 64742-95-6
ARCTIC
37930 FORMULA 40 HERBICIDE (VERTAC)
ANTI-SEIZE, UNGAR 8001
GELLA 4441 REENTERABLE ENCAPSULATING COMPOUND 64742-18-3
68239-06-5
2082-79-3
69102-90-5
64742-18-3
CONDUCTIVE ADHESIVE CON RTV 1, 72-00002
CONDUCTIVE ADHESIVE CON RTV 1, 72-00002
HYSOL KS4008 PART A KA4008, KS4008 7440-22-4
25068-38-6
26447-14-3
HYSOL KS4008 PART B KB4008, KS4008 80-05-7
111-40-0
25068-38-6
PF-5060 3M BRAND PERFORMANCE FLUID 86508-42-1
PRONTO CA-5 INSTANT ADHESIVE 7085-85-0
80-62-6
123-31-9
SYNTA-LUBE, OL-216
SAVVYSOAP HEAVY DUTY SKIN CLEANSER
ALL DYMO DIAMOND COMPOUNDS 7782-40-3
9003-13-8
56-81-5
7631-86-9
ECO-STS SANDY BEIGE-STD TRAFFIC SYSTEM, 08556-15
6242 TONER 25767-47-9
1333-86-4
9003-07-4
84179-66-8
109125-50-0
109125-51-1
25869-00-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net