ADHESIVES TECHNOLOGY CORP -- MORTAR RESIN PRODUCT, 400
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSWTF
MSDS NAME: MORTAR RESIN PRODUCT, 400
Responsible Party
Name: ADHESIVES TECHNOLOGY CORP
City: KENT WA 98032
Info Phone: 800-255-3924
Emergency Phone Number: 800-255-3924
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ADHESIVE TECHNOLOGY CORP
Address: 4210 B STREET N.W. SUITE D
City: AUBURN WA 98001
Phone: 206-850-2400
Name: ADHESIVES TECHNOLOGY CORP
Address: 8041 S 228TH ST SUITE 101
City: KENT WA 98032
Phone: 206-850-2400
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INGEST:SINGLE DOSE ORAL TOXICITY. EYE:CAN CAUSE BURNS.
SKIN:CAN CAUSE BURNS. REPETITIVE PROLONGED EXPOSURE MAY RESULT IN ABSORPTION
OF POTENTIALLY TOXIC AMOUNTS. INHAL:SLIGHTLY TOXIC. CAN CAUSE IRRITA TION OF
RESPIRATORY TRACT. OVEREXPOSURETO FUMES OR VAPOR MAY CAUSE DELAYED LUNG
DAMAGE.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: RESPIRATORY TRACT IRRITATION, CENTRAL
NERVOUS SYSTEM DEPRESSION, LUNG INJURY.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES:FLUSH W/COOL FLOWING WATER FOR AT LST 30 MINS & GET MED
ATTN. SKIN:PROMPTLY WIPE CLEAN W/CLEAR PAPER/CLOTHS & WASH W/SOAP &
WATER. REMOVE & WASH GROSSLY CONTAM CLTHG BEFORE REUSE. DISCARD CONTAM
LEATHER ITEMS. INHAL:REMOVE PERS TO FRESH AIR, KEEP HIM WARM & QUIET
& GET MED ATTN PROMPTLY. INGEST:IF LG AMTS ARE SWALLOWED, PROMPTLY INDUCE
VOMIT UNTIL FLUID IS CLEAR & GET MED ATTN PROMPTLY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SOAK UP W/ABSORBENT MATERIAL - AVOID CONTACT W/SKIN
& BREATHING OF HEATED FUMES. RESIDUAL CAN BE REMOVED W/NON FLAMMABLE
METHYLENE CHLORIDE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N). BURN IN INCINERATOR OR BURY IN LANDFILL.
Handling And Storage Precautions: SKIN SENSITIZATION MAY OCCUR. AVOID CONTACT
W/SKIN & EYES. AVOID RUBBING FACE & EXPOSED SKIN.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: >200F,>93C
Extinguishing Media: FOAM, CO*2.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN
=======================================================
Control Measures
=======================================================
Respiratory Protection: SHOULD BE WORN TO AVOID BREATHING VAPORS WHEN TLV IS
EXCEEDED. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
(FP N).
Ventilation: LOCAL EXHAUST SUGGESTED.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORK GOGGS W/ (SUPDAT)
Other Protective Equipment: EMERGENCY EYE WASH & DELUGE SHOWER (FP N). USE
BARRIER CREAMS. BODY COVERING, DISPOSABLE PAPERS IN WORK AREAS.
Work Hygienic Practices: REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health: SPEC GRAV:1.15 +/- 0.05 (H*2O=1). EYE PROT:FULL
LENGTH FACESHIELD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
Spec Gravity: SUPP DATA
Evaporation Rate & Reference: 0
Solubility in Water: NEGLIGIBLE
Appearance and Odor: STRAW COLORED; MILD AROMATIC ODOR.
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: UNCONTROLLED REACTION WHEN 2 COMPONENTS MIXED.
Materials To Avoid: ACID BASE.
Hazardous Decomposition Products: NONE SPECIFIED BY MANUFACTURER.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: DO NOT MIX A & B COMPONENTS UNTIL USE.
IRREVERSIBLE REACTION OCCURS.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: MORTAR RESIN PRODUCT, 400
Assigned IND: Y
Company: ADHESIVES TECHNOLOGY CORP
Street: 8041 S 228TH ST SUITE 101
City: KENT WA
Zipcode: 98032
Health Emergency Phone: 800-255-3924
Label Required IND: Y
Date Of Label Review: 01/18/1994
Status Code: C
Label Date: 01/18/1994
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:INGEST:SINGLE DOSE ORAL TOXICITY.
EYE:CAN CAUSE BURNS. SKIN:CAN CAUSE BURNS. REPETITIVE PROLONGED EXPOSURE MAY
RESULT IN ABSORPTION OF POTENTIALLY TOXIC AMOUNTS. INHAL:SLIGHTLY TOXI C. CAN
CAUSE IRRITATION OF RESPIRATORY TRACT. CHRONIC:OVEREXPOSURE TO FUMES OR VAPOR
MAY CAUSE DELAYED LUNG DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.