DEXTER AEROSPACE -- XEA 9359.3 PART B
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSWPT
MSDS NAME: XEA 9359.3 PART B
Kit Part: Y
Responsible Party
Name: DEXTER AEROSPACE
Address: 2850 WILLOW PASS RD
City: PITTSBURG CA 94565-3299
Info Phone: 510-458-8000
Emergency Phone Number: 202-483-7616;800-424-9300(CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address: 2850 WILLOW PASS ROAD
Box: 312
City: BAY POINT CA 94565-3299
Phone: 202-483-7616
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: THIS MATERIAL IS CORROSIVE TO EYES & SKIN.
BRIEF CONTACT MAY CAUSE CHEMICAL BURNS. VAPORS & MISTS WILL IRRITATE NOSE
& THROAT. SYMPTOMS OF EXPOSURE:SKIN OR EYE IRRITATION, CHEST DISCOMFORT.
CHR ONIC: REPEATED OR PROLONGED SKIN CONTACT MAY RESULT IN BURNS &
POSSIBLE ALLERGIC SENSITIZATION.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: SKIN SENSITIZATION.
First Aid: EYES: FLUSH WITH LOTS OF RUNNING WATER FOR AT LEAST 15 MINUTES. GET
MEDICAL ATTENTION IMMEDIATELY. SKIN: WASH THOROUGHLY WITH SOAP & WATER.
IF IRRITATION PERSISTS, GET MEDICAL ATTENTION. INHALATION: R EMOVE TO FRESH
AIR. IF SYMPTOMS PERSIST, GET MEDICAL ATTENTION. INGESTION: DRINK PLENTY OF
WATER. GET MEDICAL ATTENTION IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR PROTECTIVE CLOTHING, GLOVES & SAFETY
GLASSES. ABSORB SPILL WITH SORBENT MATERIAL SUCH AS VERMICULITE OR SAND.
SCRAPE UP OR SHOVEL INTO DOT-APPROVED WASTE CONTAINERS.
Waste Disposal Methods: MATL AS WASTE IS NOT CONSIDERED RCRA HAZ WASTE.
HOWEVER, INCIN IN EPA-APPRVD WASTE INCIN IS PREF DISP PRACT. CHEM ADDN,
PROCESSING/OTHERWISE ALTERING MATL MAY MAKE THIS WASTE MANAGEMENT INFO
INCOMPLET E/INACCURATE/INAPPROP. ALSO, STATE & (SUPDAT)
Handling And Storage Precautions: MAY BE STORED AT ROOM TEMPERATURE (77F) FOR
UP TO 12 MONTHS. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions: FOLLOW CURING SCHEDULE & MIXING RATIOS AS RECOM IN
PRODUCT LITERATURE & MSDS. EMPTY CONTAINERS RETAIN PRODUCT RESIDUE SO
OBEY HAZARD WARNINGS & HANDLE EMPTY CONTAINERS AS IF FULL. DO NOT CUT,
GRIND, W ELD OR DRILL ON OR NEAR THIS CONTAINER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: DRY CHEMICAL OR HALON FIRE EXTINGUISHER OR WATER SPRAY,
FOAM OR FOG.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). CARTRIDGE RESPIRATORS DO NOT PROVIDE ADEQUATE PROT FOR FIRE
FIGHTERS OR EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard: MAY LIBERATE LARGE QUANTITIES OF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF LOCAL EXHAUST VENTILATION IS INADEQUATE, A
NIOSH/MSHA APPROVED RESPIRATOR EQUIPPED WITH ORGANIC VAPOR CARTRIDGES MAY BE
APPROPRIATE.
Ventilation: LOCAL EXHAUST VENTILATION AT THE POINT OF USE.
Protective Gloves: BUTYL RUBBER/PVC/NITRILE RUBBER GLOVES.
Eye Protection: CHEM WORK GOGG W/FULL LNGTH FACESHLD.
Other Protective Equipment: LONG-SLEEVED SHIRT & TROUSERS. AN EYEWASH & SAFETY
SHOWER SHOULD BE NEARBY & READY FOR USE.
Work Hygienic Practices: AVOID CONTACT. AVOID BREATHING VAPORS. WASH AFTER
HANDLING.
Supplemental Safety and Health: CNDTNS (POLYM):TO OBSERVE THESE PREC MAY RSLT
IN EXCESSIVE HEAT BUILD-UP CAUSING AN EXOTHERM. THE EXOTHERM HAS THE
POTENTIAL FOR RELEASE OF TOXIC GASES. WASTE DISP METH:LOCAL REQ MAY BE MORE
RESTRICTI VE/OTHERWISE DIFFERENT FROM FED LAWS & REGS. CONSULT STATE
& LOCAL REGS REGARDING PROPER DISPOSAL OF THIS MATERIAL.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: C2
Spec Gravity: 1.11 (H*2O=1)
Appearance and Odor: BLUE PASTE WITH RUBBER ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products: CARBON MONOXIDE, NO*X, ALDEHYDES, ACIDS &
UNDETERMINED ORGANICS.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: AVOID MIXING IN BATCHES > 1 LB UNLESS YOU
PLAN TO USE IMMED. DO NOT HEAT MIXED ADHESIVE UNLESS CURING. FAILURE (SUPDAT)
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: XEA 9359.3 PART B
Company: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Street: 2850 WILLOW PASS ROAD
PO Box: 312
City: BAY POINT CA
Zipcode: 94565-3299
Health Emergency Phone: 202-483-7616;800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 01/19/1994
Status Code: C
Label Date: 01/19/1994
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Severe
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: THIS MATERIAL IS CORROSIVE TO EYES & SKIN.
BRIEF CONTACT MAY CAUSE CHEMICAL BURNS. VAPORS & MISTS WILL IRRITATE NOSE
& THROAT. SYMPTOMS OF EXPOSURE:SKIN OR EYE IRRITATION, CHEST DISCOMFORT.
CHR ONIC: REPEATED OR PROLONGED SKIN CONTACT MAY RESULT IN BURNS &
POSSIBLE ALLERGIC SENSITIZATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|