Search   
MSDS  : DARINA GREASE AX, 70330
CAS  : 1302-78-9
68910-93-0
7632-00-0
64742-52-5
64742-57-0
NAME  : bentonite (inorganic clay)
fatty acid amides
sodium nitrite (sara iii)
other components
supp data:to fresh air & provide o*2 if brthg is difficult.
7:no treatment is nec unless lrg qtys of prod are
8:gen, emesis induction is unnecessary in high
supp data:normal use of this product should not result in
ing 10:of accidental ingestion,sodium nitrate may alter the
ing 11:cyanosis(bluish skin),shortness of
mineral oil, petroleum distillates, hydro treated heavy
residual oils, hydrotreated
===================== Product Identification =====================

MSDS NAME:DARINA GREASE AX, 70330
NIIN:00N017193
MSDS Number: BLCDF
=== Responsible Party ===
Company:SHELL OIL COMPANY
Box:4320
City:HOUSTON
State:TX
ZIP:77210
Country:US
Info Phone Num:713-241-4819
Emergency Phone Num:713-473-9461 800-424-9300(CHEMTREC)
CAGE:54572
=== Contractor Identification ===
Company:SHELL OIL COMPANY
Box:City:HOUSTON
State:TX
ZIP:77210
Country:US
Phone:713-241-4819
CAGE:54572

============= Composition/Information on Ingredients =============

Name:BENTONITE (INORGANIC CLAY)
CAS:1302-78-9
RTECS #:CT9450000
Fraction by Wt: 5%

Name:FATTY ACID AMIDES
CAS:68910-93-0
Fraction by Wt: 4%

Name:SODIUM NITRITE (SARA III)
CAS:7632-00-0
RTECS #:RA1225000
Fraction by Wt: <1%
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:OTHER COMPONENTS
Fraction by Wt: <0.1%

Name:SUPP DATA:TO FRESH AIR & PROVIDE O*2 IF BRTHG IS DIFFICULT.
GET MD ATTN. INGEST:DO NOT INDUCE VOMIT. IN GEN,(SEE ING 8)
RTECS #:9999999ZZ

Name:INGRED 7:NO TREATMENT IS NEC UNLESS LRG QTYS OF PROD ARE
INGESTED. HOWEVER, GET MED ADVICE. NOTE TO PHYS:IN (SEE ING 9)
RTECS #:9999999ZZ

Name:INGRED 8:GEN, EMESIS INDUCTION IS UNNECESSARY IN HIGH
VISCOSITY, LOW VOLATILITY PROD. I.E.. MOST OILS & GREASES.
RTECS #:9999999ZZ

Name:SUPP DATA:NORMAL USE OF THIS PRODUCT SHOULD NOT RESULT IN
OVEREXPOSURE TO ING 05,SODIUM NITRATE. HOWEVER,IN CASE(ING 11)
RTECS #:9999999ZZ
Other REC Limits:NONE SPECIFIED

Name:ING 10:OF ACCIDENTAL INGESTION,SODIUM NITRATE MAY ALTER THE
BLOOD(HEMOGLOBIN)TO REDUCE OXYGEN CARRYING CAPACITY:(ING 12)
RTECS #:9999999ZZ
Other REC Limits:NONE SPECIFIED

Name:ING 11:CYANOSIS(BLUISH SKIN),SHORTNESS OF
BREATH,PALPITATIONS,COMA AND/OR DEATH MAY OCCUR.
RTECS #:9999999ZZ
Other REC Limits:NONE SPECIFIED

Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDRO TREATED HEAVY
NAPHTHENIC; (HYDROTREATED HEAVY NAPHTHENIC DISTILLATE,PETROLEUM)
CAS:64742-52-5
RTECS #:PY8035000
Fraction by Wt: 65%
OSHA PEL:300 PPM;500 PPM STEL
ACGIH TLV:300 PPM;500 PPM STEL

Name:RESIDUAL OILS, HYDROTREATED
CAS:64742-57-0
Fraction by Wt: 25%
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (OIL MIST)

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE: MAY BE MILDLY IRRIT TO EYES.
SKIN: PRLNGD/RPTD CONTACT MAY CAUSE VARIOUS SKIN DISORDERS SUCH AS
DERM, FOLLICULITIS/OIL ACNE. RELS DURING HIGH PRESS USAGE MAY RSLT
IN INJECTION OF OIL INTO SKIN CA USING LOCAL NECROSIS. INHAL: NO
SPECIFIC INFORMATION IDENTIFIED. INGEST: NO SPECIFIC INFORMATION
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:MINERAL OIL CAS # 64742-52-5 LISTED IN
RTECS ASIARC GROUP 1.
Effects of Overexposure:HLTH HAZ: IDENTIFIED. SIGNS AND SYMPTOMS: IRRIT
AS NOTED ABOVE. LOCAL NECROSIS IS EVIDENCED BY DELAYED ONSET OF
PAIN AND TISSUE DAMAGE. OTHER HLTH EFTS: THIS SPECIFIC PROD HAS NOT
BEEN TESTED IN LONG- TERM, CHRONIC EXPOS TESTS. LUBRICATING GREASES
ARE GEN CONSIDERED TO BE OF LOW ORDER OF ACUTE TOXICITY (SEE SUPP
DATA)
Medical Cond Aggravated by Exposure:PREEXISTING SKIN DISORDERS MAY BE
AGGRAVATED BY EXPOS TO PROD.

======================= First Aid Measures =======================

First Aid:EYE:FLUSH W/H*2O FOR AT LEAST 15 MIN WHILE HOLDING EYELIDS
OPEN. GET MD ATTN. SKIN:REMOVE CONTAM CLTHG & WIPE EXCESS OFF. WASH
W/SOAP & H*2O/WATERLESS HAND CLEANER FOLLOWED BY SOAP & H*2O. DO
NOT REUS E CLTHG UNTIL THORO CLEANED. IF IRRIT PERSISTS, GET MD
ATTN. IF MATL IS INJECTED UNDER SKIN, GET MD ATTN PROMPTLY TO PVNT
SERIOUS DAMAGE: DO NOT WAIT FOR SYMP DEVELOP. INHAL:REMOVE (SEE
SUPP DATA)

===================== Fire Fighting Measures =====================

Flash Point Method:PMCC
Flash Point:430F,221C
Extinguishing Media:USE H*2O FOG, DRY CHEMICAL/CO*2. DO NOT USE A
DIRECT STREAM OF H*2O. PROD WILL FLOAT & CAN BE REIGNITED ON SURF
OF H*2O.
Fire Fighting Procedures:DO NOT ENTER CONFINED FIRE SPACE W/OUT PROPER
PROT EQUIP INCLUDING A NIOSH/MSHA APPRVD SCBA. COOL FIRE EXPOSED
CNTNRS SURROUNDING EQUIPMENT & STRUCTURES W/H*2O.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

================== Accidental Release Measures ==================

Spill Release Procedures:SCOOP UP EXCESS GREASE. CLEAN AREA
W/APPROPRIATE CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH TEMPERATURES.
Other Precautions:MINIMIZE SKIN CONTACT. WASH WITH SOAP & WATER BEFORE
EATING, DRINKING, SMOKING OR USING TOILET FACILITIES. LAUNDER
CONTAM CLTHG BEFORE REUSE. PROPERLY DISPOSE OF CONTAM LEATHER
ARTICLES, INCLUDING SHO ES, THAT CANNOT BE DECONTAMINATED.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:OIL RESISTANT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:PARTICULATES & GASES WILL EVOLVE WHEN MATL UNDERGOES
PYROLYSIS/COMBUST.CO & UNIDENTIFIED ORG COMPOUNDS MAY BE FORMED
UPON COMBUST.EFTS OF OVEREXP:TO HUMANS & EXPTAL ANIMALS.HOWEVER,HND
LG PROC & SFTY PREC IN MSDS SHOULD BE FOLLOWED TO MINIMIZE
EMPLOYEE'S EXPOS(SEE ING 10).FIRST AID PROC:VICTIM(SEE ING 7)

================== Physical/Chemical Properties ==================

HCC:V6
Solubility in Water:INSOLUBLE
Appearance and Odor:BROWN, SMOOTH, SLIGHT ODOR.

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT, OPEN FLAME AND CONTACT WITH
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:THERMAL DECOMP PROD ARE HIGHLY
DEPENDENT ON COMBUST CONDITIONS. A COMPLEX MIXTURE OF AIRBORNE
SOLID, LIQ(SEE SUPP DATA)

==================== Disposal Considerations ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
OVEN & GRIDDLE CLEANER, 356 1310-58-3
112-34-5
OVEN & GRIDDLE AEROSOL R, 801 75-28-5
1310-73-2
PC70 THINNER 67-63-0
67-56-1
XM 27.324 THINNER FOR SOLDER CREAM
AQUEOUS AMINE SOLUTION 110-91-8
108-91-8
ELECTRODE CLEANING SOLUTION 67-56-1
7647-01-0
FUEL OIL, 008102 68334-30-5
ACRAGLAS GEL RESIN 1675-54-3
CARBON STEEL HR & CR, A36 7439-89-6
7439-96-5
7440-44-0
7429-90-5
7723-14-0
7704-34-9
7440-21-3
1314-62-1
7440-03-1
7440-69-9
7439-92-1
BRAYCO MICRONIC 883 RED 115-86-6
68037-01-4
118-82-1
29385-43-1
BRAYCO MICRONIC 883 UNDYED 115-86-6
68037-01-4
118-82-1
29385-43-1
OMC POWER TRIM FLUID, 60-375 64741-89-5
64741-88-4
OMC HI-VIS GEAR LUBE, 31-250 64741-88-4
64742-01-4
ULTRA STICK RP 8OZ BRUSH TOP, 45051 78-93-3
25014-31-7
9011-29-4
8050-31-5
112945-52-5
9003-55-8
108-88-3
110-54-3
142-82-5
DARINA GREASE AX, 70330 1302-78-9
68910-93-0
7632-00-0
64742-52-5
64742-57-0
ROTELLA OIL 30, 54003 64742-54-7
64742-18-3
N,N-DIMETHYLFORMAMIDE, 99.9+%,HPLC GRADE, 2 68-12-2
DEVCLAD 182 GRAY CONVERTER, 182C0210 14807-96-6
1344-95-2
SAVIN PRISM I CYAN COLOR DEVELOPER, 8231
SAVIN PRISM I DRY YELLOW INK/TONER, 8227
SAVIN PRISM I DRY CYAN INK/TONER, 8225
SAVIN PRISM I DRY BLACK INK/TONER 8221 1333-86-4
SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
SAVIN PRISM I BLACK COLOR DEVELOPER, 8229 1333-86-4
ARACAST XU AY 238 15336-82-0
TINUVIN 292 41556-26-7
82919-37-7
FLAME RETARDANT FLOOR COVERING 7783-20-2
7783-28-0
UNDERCOATER SOUND DEADNER 75-09-2
64742-89-8
8052-42-4
74-98-6
75-28-5
BOILER TRT, 2462 7681-57-4
SUNOCO MULTI-PURPOSE 2EP 7620-77-1
64742-65-0
15377-18-5
68511-50-2
8052-42-4
68457-79-4
EPOXY RESIN COMPONENT, 10-347-1R 25068-38-6
7631-86-9
EPOXY HARDNER, 10-347-2R 112-24-3
7631-86-9
STEPAN FOAM KB8820 188200
EASY-COTE (179559) 654
SAFETY-KLEEN GENERAL PURPOSE CLEANER 666 50 6834-92-0
497-19-8
7601-54-9
8002-09-3
518-47-8
COVENTRY S/G SUPER WHITE 0133517 57-55-6
13463-67-7
UNITED 695 586-62-9
7705-14-8
80-56-8
79-92-5
99-86-5
NAMALAC - WHITE 0003016 8052-41-3
13463-67-7
CPS 5000 SERIES COLOR #16515 GRAY 941 SP 64742-89-8
1288 CLEAR SEAL
TEMPLATE EMULSIONS 7783-96-2
7783-90-6
9009-70-8
10108-64-2
REFRIGERANT GAS R22 158 75-45-6
REFRIGERANT GAS R11 161 75-69-4
TOUCH-N FOAM INSTANT INSULATION 1367-48-5
75-71-8
115-10-6
26447-40-5
URETHANE PART A R4-026 110-43-0
108-88-3
1330-20-7
100-41-4
67-64-1
URETHANE PART B R0-090 28182-81-2
110-43-0
ALL STYLES OF FIBERGLASS 65997-17-3
9005-25-8
9002-89-5
HUMISEAL STRIPPER 1075 71-55-6
HUMISEAL THINNER 73 123-86-4
111-76-2
PASTE WOOD FILLER INTERIOR SOLVENT BASE 480 14807-96-6
64742-88-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net