===================== Product Identification =====================
MSDS NAME:PASTE WOOD FILLER INTERIOR SOLVENT BASE 480
NIIN:00N017291
MSDS Number: BLCGF
=== Responsible Party ===
Company:DEVOE & RAYNOLDS CO
Address:4000 DUPONT CIRCLE
City:LOUISVILLE
State:KY
ZIP:40207
Info Phone Num:502-589-9340
Emergency Phone Num:502-589-9340
CAGE:EO559
=== Contractor Identification ===
Company:DEVOE & RAYNOLDS CO, INC.
Box:7600
CAGE:EO559
Company:DEVOE COATINGS CO
Address:4000 DUPONT CIRCLE
Box:7600
City:LOUISVILLE
State:KY
ZIP:40207-4802
Country:US
Phone:502-897-9861
CAGE:1HK86
============= Composition/Information on Ingredients =============
Name:ING 9: TO REMOVE A COMBINATION OF PARTICULATES & VAP. WHEN
USED IN CONFINED AREAS, WEAR NIOSH/MSHA APPRVD (SEE ING 11)
RTECS #:9999999ZZ
Name:INGRED 10: AIR SUPPLY RESP/HOODS. USE NIOSH/MSHA APPRVD
RESP WHEN FLAME CUTTING, WELDING, BRAZING & SANDING (SEE ING 12)
RTECS #:9999999ZZ
Name:INGRED 11: MATERIAL COATED WITH THIS PRODUCT. FOLLOW
RESPIRATOR MFR'S DIRECTIONS FOR RESPIRATOR USE.
RTECS #:9999999ZZ
Name:VENT: BELOW CURRENT APPLIC SFTY & HLTH STANDARDS IN MIXING,
APPLICATION & CURING AREAS, & TO REMOVE SANDING (SEE ING 14)
RTECS #:9999999ZZ
Name:INGRED 13: DUSTS OF DRIED COATING & DECOMP PROD DURING
WELDING & FLAME CUTTING ON SURFS COATED W/PROD. (SEE INGRED 15)
RTECS #:9999999ZZ
Name:INGRED 14: HEAVY SOLV VAPS SHOULD BE REMOVED FROM LOWER
LEVS OF WORK AREA & ALL IGNITION SOURCES SHOULD BE ELIMINATED.
RTECS #:9999999ZZ
Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 60%
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192
Name:MINERAL SPIRITS. VP: 2 @ 68 F. LEL: 1.
CAS:64742-88-7
Fraction by Wt: 20%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM
Name:SOYA ALKYD RESIN
Fraction by Wt: 15%
Name:FIRST AID PROC: PHYSICIAN IMMEDIATELY. ASPIRATION OF
VOMITUS CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL.
RTECS #:9999999ZZ
Name:SPILL PROC: TOOLS. STORE IN CLOSED CONTAINERS UNTIL
PROPERLY DISPOSED OF.
RTECS #:9999999ZZ
Name:OTHER PREC: KEEP OUT OF REACH OF CHILDREN. WARNING: PROD
MAY CONTAIN CHEM KNOW TO STATE OF CALIFORNIA TO (SEE INGRED 8)
RTECS #:9999999ZZ
Name:INGRED 7: CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE
HARM.
RTECS #:9999999ZZ
Name:RESP PROT: SANDING DUST. WHEN USED IN RESTRICTED AREAS,
WEAR NIOSH/MSHA APPRVD CHEM/MECH FILTERS DESIGNED (SEE ING 10)
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: IRRIT OF RESP TRACT;
HDCH, NAUSEA, DIZZ, WEAK & FATIGUE. EXTREME EXPOS CAN RSLT IN
UNCONSCIOUSNESS & EVEN RESP ARREST. SKIN/EYE: PRIMARY IRRIT.
INGEST: CAN CAUSE STOMACH &/OR INTESTINAL IRRIT, NAUSEA, VOMIT &
DIARRHEA. ASPIR OF VOMITUS CAN CAUSE CHEM PNEUMONITIS, WHICH CAN BE
FATAL. (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CHRONIC: REPORTS HAVE ASSOCIATED RPTD
& PRLNGD OCCUPATIONAL OVEREXP TO SOLV W/PERM BRAIN & NERVOUS SYS
DAMAGE. PROLONGED AND REPEATED BREATHING OF SPRAY MIST AND/OR
SANDING DUST OVER A PERIO D OF YEARS MAY CAUSE DUST DISEASE OF
LUNGS.
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.
======================= First Aid Measures =======================
First Aid:INHAL: LEAVE AREA TO OBTAIN FRESH AIR. IF CONTINUED DFCLTY IS
EXPER, SUMMON MED ASSISTANCE IMMED. IF BRTHG CEASES, RESTORE USING
APPRVD CPR TECHNIQUES & SUMMON MED ASSISTANCE IMMED. EYE: FLUSH
W/LRG A MTS OF H*2O FOR AT LEAST 15 MIN. GET MED ASSISTANCE. SKIN:
WASH AREA THORO W/SOAP & H*2O. REMOVE SOILED CLTHG. GET MED
ASSISTANCE IF IRRIT PERSISTS. INGEST: DO NOT INDUCE VOMIT.
CONSULT(SEE INGERED 5)
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:102F,39C
Lower Limits:SEE INGRED
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM OR OTHER NFPA APPROVED
METHOD FOR TREATING CLASS B FIRE.
Fire Fighting Procedures:SUMMON PROFESSIONAL FIREFIGHTERS. USE
NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP . H*2O SPRAY MAY BE
INEFFECTIVE. IF H*2O IS USED, FOG NOZ (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT & FLAME. DUE TO PRESS BUILD-UP CLSD CONTRS EXPOSED TO EXTREME
HEAT MAY EXPLODE. NEVER USE WELDING/ (SEE SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (HEAT,FLAME).
DO NOT SMOKE. AVOID BRTHG VAPS. BEFORE ATTEMPTING CLEAN-UP REFER TO
HAZ CAUTION INFORM IN OTHER SECTIONS OF MSDS FORM. VENT AREA.
CONTAIN SPILLED MATL & RE MOVE W/INERT ABSORB & NON-SPARKING
(SEEING 6)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT & FLAME. DO NOT
SMOKE. PVNT BUILD-UP OF VAPS BY MAINTAINING CONTINUOUS FLOW OF
FRESH AIR. DO NOT STORE ABOVE 120 F.
Other Precautions:DO NOT STORE NEAR FIRE/OPEN FLAME. STORE LRG QTYS IN
BUILDINGS DESIGNED TO COMPLY W/OSHA 1910.106. KEEP CONTR CLSD WHEN
NOT IN USE. DO NOT TRANSFER CONTENTS TO BOTTLES/OTHER UNLABELLED
CONTRS. DO NOT REUSE EMPTY CONTRS. (SEE ING 7)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:DO NOT BRTH VAPS, SPRAY MIST/SANDING DUST. WHEN
SPRAY APPLIED IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT, & DURING
SANDING/GRINDING OPER, USE NIOSH/MSHA APPRVD MECH FILTER RESP TO
REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY & (SEE ING 9)
Ventilation:USE ONLY W/ADEQ VENT. PROVIDE GEN DILUTION/LOCAL EXHAUST
VENT IN VOL & PATTERN TO KEEP AIR CONTAM CONC (SEE INGRED 13)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERMEABLE CLOTHING AND BOOTS TO PREVENT
CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, SMOKING OR USING WASHROOM.
Supplemental Safety and Health
FIRE FIGHT PROC: ARE PREFERABLE. IF EXPOSED TO FIRE/EXTREME HEAT, H*2O
SHOULD BE USED TO COOL CLSD CONTRS & PVNT PRESS BUILD-UP/POS
AUTO-IGNIT. EXPLO HAZ: CUTTING TORCH ON/NEAR CONTR (EVEN EMPTY) AS
P ROD/ITS RESIDUE MAY IGNITE. DURING EMERCONDITIONS, OVEREXP TO
DECOMP PROD MAY CAUSE HLTH HAZ. SYMP MAY (SEE ING 4)
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:SEE ING 2
Vapor Density:>1
Spec Gravity:1.539
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:45.2
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZ FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CO, CO*2 AND OXIDES OF METALS LISTED IN
INGREDIENTS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
OVEN & GRIDDLE CLEANER, 356
| 1310-58-3
112-34-5 |
|
OVEN & GRIDDLE AEROSOL R, 801
| 75-28-5
1310-73-2 |
|
PC70 THINNER
| 67-63-0
67-56-1 |
|
XM 27.324 THINNER FOR SOLDER CREAM
| |
|
AQUEOUS AMINE SOLUTION
| 110-91-8
108-91-8 |
|
ELECTRODE CLEANING SOLUTION
| 67-56-1
7647-01-0 |
|
FUEL OIL, 008102
| 68334-30-5 |
|
ACRAGLAS GEL RESIN
| 1675-54-3 |
|
CARBON STEEL HR & CR, A36
| 7439-89-6
7439-96-5
7440-44-0
7429-90-5
7723-14-0
7704-34-9
7440-21-3
1314-62-1
7440-03-1
7440-69-9
7439-92-1 |
|
BRAYCO MICRONIC 883 RED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
BRAYCO MICRONIC 883 UNDYED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
OMC POWER TRIM FLUID, 60-375
| 64741-89-5
64741-88-4 |
|
OMC HI-VIS GEAR LUBE, 31-250
| 64741-88-4
64742-01-4 |
|
ULTRA STICK RP 8OZ BRUSH TOP, 45051
| 78-93-3
25014-31-7
9011-29-4
8050-31-5
112945-52-5
9003-55-8
108-88-3
110-54-3
142-82-5 |
|
DARINA GREASE AX, 70330
| 1302-78-9
68910-93-0
7632-00-0
64742-52-5
64742-57-0 |
|
ROTELLA OIL 30, 54003
| 64742-54-7
64742-18-3 |
|
N,N-DIMETHYLFORMAMIDE, 99.9+%,HPLC GRADE, 2
| 68-12-2 |
|
DEVCLAD 182 GRAY CONVERTER, 182C0210
| 14807-96-6
1344-95-2 |
|
SAVIN PRISM I CYAN COLOR DEVELOPER, 8231
| |
|
SAVIN PRISM I DRY YELLOW INK/TONER, 8227
| |
|
SAVIN PRISM I DRY CYAN INK/TONER, 8225
| |
|
SAVIN PRISM I DRY BLACK INK/TONER 8221
| 1333-86-4 |
|
SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
| |
|
SAVIN PRISM I BLACK COLOR DEVELOPER, 8229
| 1333-86-4 |
|
ARACAST XU AY 238
| 15336-82-0 |
|
TINUVIN 292
| 41556-26-7
82919-37-7 |
|
FLAME RETARDANT FLOOR COVERING
| 7783-20-2
7783-28-0 |
|
UNDERCOATER SOUND DEADNER
| 75-09-2
64742-89-8
8052-42-4
74-98-6
75-28-5 |
|
BOILER TRT, 2462
| 7681-57-4 |
|
SUNOCO MULTI-PURPOSE 2EP
| 7620-77-1
64742-65-0
15377-18-5
68511-50-2
8052-42-4
68457-79-4 |
|
EPOXY RESIN COMPONENT, 10-347-1R
| 25068-38-6
7631-86-9 |
|
EPOXY HARDNER, 10-347-2R
| 112-24-3
7631-86-9 |
|
STEPAN FOAM KB8820 188200
| |
|
EASY-COTE (179559) 654
| |
|
SAFETY-KLEEN GENERAL PURPOSE CLEANER 666 50
| 6834-92-0
497-19-8
7601-54-9
8002-09-3
518-47-8 |
|
COVENTRY S/G SUPER WHITE 0133517
| 57-55-6
13463-67-7 |
|
UNITED 695
| 586-62-9
7705-14-8
80-56-8
79-92-5
99-86-5 |
|
NAMALAC - WHITE 0003016
| 8052-41-3
13463-67-7 |
|
CPS 5000 SERIES COLOR #16515 GRAY 941 SP
| 64742-89-8 |
|
1288 CLEAR SEAL
| |
|
TEMPLATE EMULSIONS
| 7783-96-2
7783-90-6
9009-70-8
10108-64-2 |
|
REFRIGERANT GAS R22 158
| 75-45-6 |
|
REFRIGERANT GAS R11 161
| 75-69-4 |
|
TOUCH-N FOAM INSTANT INSULATION
| 1367-48-5
75-71-8
115-10-6
26447-40-5 |
|
URETHANE PART A R4-026
| 110-43-0
108-88-3
1330-20-7
100-41-4
67-64-1 |
|
URETHANE PART B R0-090
| 28182-81-2
110-43-0 |
|
ALL STYLES OF FIBERGLASS
| 65997-17-3
9005-25-8
9002-89-5 |
|
HUMISEAL STRIPPER 1075
| 71-55-6 |
|
HUMISEAL THINNER 73
| 123-86-4
111-76-2 |
|
PASTE WOOD FILLER INTERIOR SOLVENT BASE 480
| 14807-96-6
64742-88-7 |
|
|