Search   
MSDS  : ROTELLA OIL 30, 54003
CAS  : 64742-54-7
64742-18-3
NAME  : first aid proc: ingested. however, get med attn. note to
8: viscosity, low volatility prod. i.e.. most oils
spill proc: take up with an absorbent material and dispose
mineral oil, petroleum distillates, hydrotreated heavy
mineral oil, petroleum distillates, acid-treated heavy
additive containing zinc dialkyl dithiophosphate
minor additives
efts of overexp:for carcinogenicity in experimental animals
5: msds should be followed to minimize employee's
===================== Product Identification =====================

MSDS NAME:ROTELLA OIL 30, 54003
NIIN:00N017194
MSDS Number: BLCDG
=== Responsible Party ===
Company:SHELL OIL COMPANY
Box:4320
City:HOUSTON
State:TX
ZIP:77210
Info Phone Num:713-241-4819
Emergency Phone Num:713-473-9461 800-424-9300(CHEMTREC)
CAGE:54527
=== Contractor Identification ===
Company:SHELL OIL COMPANY
Box:2463
City:HOUSTON
State:TX
ZIP:77210
Country:US
Phone:800-231-6950
CAGE:54527

============= Composition/Information on Ingredients =============

Name:FIRST AID PROC: INGESTED. HOWEVER, GET MED ATTN. NOTE TO
PHYS: IN GEN, EMESIS INDUCTION IS UNNEC IN HIGH (SEE ING 8)
RTECS #:9999999ZZ

Name:INGRED 8: VISCOSITY, LOW VOLATILITY PROD. I.E.. MOST OILS
AND GREASES.
RTECS #:9999999ZZ

Name:SPILL PROC: TAKE UP WITH AN ABSORBENT MATERIAL AND DISPOSE
OF PROPERLY.
RTECS #:9999999ZZ

Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED HEAVY
PARAFFINIC; (DISTILLATES, HYDROTREATED HEAVY PARAFFINIC)
CAS:64742-54-7
RTECS #:PY8035500
Fraction by Wt: 50-80%
OSHA PEL:300 PPM;500 PPM STEL
ACGIH TLV:300 PPM;500 PPM STEL

Name:MINERAL OIL, PETROLEUM DISTILLATES, ACID-TREATED HEAVY
NAPHTHENIC; (DISTILLATES, ACID-TREATED HEAVY NAPHTHENIC)
CAS:64742-18-3
RTECS #:PY8032000
Fraction by Wt: 15-40%
OSHA PEL:300 PPM;500 PPM STEL
ACGIH TLV:300 PPM;500 PPM STEL

Name:ADDITIVE CONTAINING ZINC DIALKYL DITHIOPHOSPHATE
Fraction by Wt: 10-25%

Name:MINOR ADDITIVES
Fraction by Wt: <1%

Name:EFTS OF OVEREXP:FOR CARCINOGENICITY IN EXPERIMENTAL ANIMALS
OF USED MOTOR OILS. HNDLG PROC & SFTY PREC IN (SEE ING 6)
RTECS #:9999999ZZ

Name:INGRED 5: MSDS SHOULD BE FOLLOWED TO MINIMIZE EMPLOYEE'S
EXPOS TO USED PRODUCT.
RTECS #:9999999ZZ

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE: LUBRICATING OILS ARE GEN
CONSIDERED NO MORE THAN MINIMALLY IRRIT TO EYES. SKIN: LUBRICATING
OILS ARE GEN CONSIDERED NO MORE THAN MILDLY IRRIT TO SKIN. PRLNGD &
RPTD CONTACT MAY RSLT IN VARIOUS SK IN DISORDERS SUCH AS DERM,
FOLLICULITISOR OIL ACNE. INHAL: INHAL OF VAP (GENERATED AT HIGH
TEMPS (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:MINERAL OIL,CAS#64742-18-3 LISTED IN
RTECS AS IARC GROUP 1.
Effects of Overexposure:HLTH HAZ:ONLY) OR OIL MIST FROM PROD MAY RSLT
IN MILD IRRIT OF UPPER RESP TRACT. INGEST: LUBRICATING OILS ARE GEN
CONSIDERED NO MORE THAN SLIGHTLY TOXIC IF SWALLOWED. SIGNS & SYMP:
IRRIT AS NOTED ABOV E. OTHER HLTH EFTS: INTERNATIONAL AGENCY FOR
RESEARCH ON CANCER HAS DETERM THERE IS SUFFICIENT EVIDENCE (SEE
INGRED 5)
Medical Cond Aggravated by Exposure:PREEXISTING SKIN & RESP DISORDERS
MAY BE AGGRAVATED BY EXPOS TO THIS PRODUCT.

======================= First Aid Measures =======================

First Aid:EYE: FLUSH W/H*2O FOR 15 MIN WHILE HOLDING EYELIDS OPEN. GET
MED ATTN. SKIN: REMOVE CONTAM CLTHG & WIPE EXCESS OFF. WASH W/SOAP
& WATER OR WATERLESS HAND CLEANER FOLLOWED BY SOAP AND WATER. IF
IRRIT O CCURS, GET MED ATTN. INHAL: REMOVE VICTIM TO FRESH AIR &
PROVIDE O*2 IF BRTHG IS DFCLT. GET MED ATTN. INGEST: DO NOT INDUCE
VOMIT. IN GEN NO TREATMENT IS NEC UNLESS LRG QTYS OF PROD ARE(SEE
ING 7)

===================== Fire Fighting Measures =====================

Flash Point Method:PMCC
Flash Point:390F,199C
Extinguishing Media:USE H*2O FOG, DRY CHEM/CO*2. DO NOT USE A DIRECT
STREAM OF H*2O. PROD WILL FLOAT & CAN BE REIGNITED ON SURF OF H*2O.
Fire Fighting Procedures:MATL WILL NOT BURN UNLESS PREHEATED. DO NOT
ENTER CONFINED FIRE-SPACE W/OUT FULL BUNKER GEAR(HELMET W/FACE
SHIELD, BUNKER COATS, GLOVES & RUB (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

================== Accidental Release Measures ==================

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE
CAUTIOUS JUDGMENT WHEN CLEANING UP LRG SPILLS. LRG SPILLS: WEAR
NIOSH/MSHA APPRVD RESP & PROT CLTHG AS APPROP. SHUT OFF SOURCE OF
LEAK IF SAFE TO DO SO. DI KE AND CONTAIN. SMALL SPILLS:(SEE ING 9)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:MINIMIZE SKIN CONTACT. WASH W/SOAP &
H*2O BEFORE EATING, DRINKING, OR USING TOILET FACILITIES. LAUNDER
CONTAM CLTHG BEFORE REUSE.
Other Precautions:PROPERLY DISPOSE OF CONTAMINATED LEATHER ARTICLES,
INCLUDING SHOES, THAT CANNOT BE DECONTAMINATED. STORE IN A COOL,
DRY PLACE WITH ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAMES AND
HIGH TEMPERATURE S.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:IF EXPOS MAY OR DOES EXCEED OCCUPATIONAL EXPOS
LIMITS, USE A NIOSH/MSHA APPRVD RESP TO PVNT OVEREXPOS. IN ACCORD
W/29 CFR 1910.134 USE EITHER A NIOSH/MSHA APPROVED ATMOSPHERE-SUPP
RESP/AIR-PURIFYING R ESP FOR ORG VAPORS AND PARTICULATES.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: BOOTS), INCLUDING A NIOSH/MSHA APPRVD POS-PRESS SCBA.
COOL FIRE EXPOSED CNTNRS W/H*2O. HAZ DECOMP PROD: PARTICULATES &
GASES WILL EVOLVE WHEN MATL UNDERGOES PYROLYSIS/COMBUST. CO, OXI
DES OF SULFER, N & PHOSPHROUS, & OTHER UNIDENTIFIED ORG COMPONDS
MAY BE FORMED UPON COMBUSTION.

================== Physical/Chemical Properties ==================

Spec Gravity:0.8745
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER OIL, SLIGHT HYDROCARBON ODOR.

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:AVOID HEAT, OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DECOMP PROD ARE HIGHLY
DEPENDENT ON COMBUST CONDITIONS. COMPLEX MIX OF AIRBORNE SOLID,
LIQ, (SEE SUPP DATA)

==================== Disposal Considerations ====================

Waste Disposal Methods:REMOVE W/VACUUM TRUCKS OR PUMP TO STORAGE
SALVAGE VESSELS. SOAK UP RESIDUE W/ABSORB SUCH AS CLAY, SAND, OR
OTHER SUITABLE MATLS; DISP OF PROPERLY. FLUSH AREA W/H*2O TO REMOVE
TRACE RESIDUE. DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL REGS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
OVEN & GRIDDLE CLEANER, 356 1310-58-3
112-34-5
OVEN & GRIDDLE AEROSOL R, 801 75-28-5
1310-73-2
PC70 THINNER 67-63-0
67-56-1
XM 27.324 THINNER FOR SOLDER CREAM
AQUEOUS AMINE SOLUTION 110-91-8
108-91-8
ELECTRODE CLEANING SOLUTION 67-56-1
7647-01-0
FUEL OIL, 008102 68334-30-5
ACRAGLAS GEL RESIN 1675-54-3
CARBON STEEL HR & CR, A36 7439-89-6
7439-96-5
7440-44-0
7429-90-5
7723-14-0
7704-34-9
7440-21-3
1314-62-1
7440-03-1
7440-69-9
7439-92-1
BRAYCO MICRONIC 883 RED 115-86-6
68037-01-4
118-82-1
29385-43-1
BRAYCO MICRONIC 883 UNDYED 115-86-6
68037-01-4
118-82-1
29385-43-1
OMC POWER TRIM FLUID, 60-375 64741-89-5
64741-88-4
OMC HI-VIS GEAR LUBE, 31-250 64741-88-4
64742-01-4
ULTRA STICK RP 8OZ BRUSH TOP, 45051 78-93-3
25014-31-7
9011-29-4
8050-31-5
112945-52-5
9003-55-8
108-88-3
110-54-3
142-82-5
DARINA GREASE AX, 70330 1302-78-9
68910-93-0
7632-00-0
64742-52-5
64742-57-0
ROTELLA OIL 30, 54003 64742-54-7
64742-18-3
N,N-DIMETHYLFORMAMIDE, 99.9+%,HPLC GRADE, 2 68-12-2
DEVCLAD 182 GRAY CONVERTER, 182C0210 14807-96-6
1344-95-2
SAVIN PRISM I CYAN COLOR DEVELOPER, 8231
SAVIN PRISM I DRY YELLOW INK/TONER, 8227
SAVIN PRISM I DRY CYAN INK/TONER, 8225
SAVIN PRISM I DRY BLACK INK/TONER 8221 1333-86-4
SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
SAVIN PRISM I BLACK COLOR DEVELOPER, 8229 1333-86-4
ARACAST XU AY 238 15336-82-0
TINUVIN 292 41556-26-7
82919-37-7
FLAME RETARDANT FLOOR COVERING 7783-20-2
7783-28-0
UNDERCOATER SOUND DEADNER 75-09-2
64742-89-8
8052-42-4
74-98-6
75-28-5
BOILER TRT, 2462 7681-57-4
SUNOCO MULTI-PURPOSE 2EP 7620-77-1
64742-65-0
15377-18-5
68511-50-2
8052-42-4
68457-79-4
EPOXY RESIN COMPONENT, 10-347-1R 25068-38-6
7631-86-9
EPOXY HARDNER, 10-347-2R 112-24-3
7631-86-9
STEPAN FOAM KB8820 188200
EASY-COTE (179559) 654
SAFETY-KLEEN GENERAL PURPOSE CLEANER 666 50 6834-92-0
497-19-8
7601-54-9
8002-09-3
518-47-8
COVENTRY S/G SUPER WHITE 0133517 57-55-6
13463-67-7
UNITED 695 586-62-9
7705-14-8
80-56-8
79-92-5
99-86-5
NAMALAC - WHITE 0003016 8052-41-3
13463-67-7
CPS 5000 SERIES COLOR #16515 GRAY 941 SP 64742-89-8
1288 CLEAR SEAL
TEMPLATE EMULSIONS 7783-96-2
7783-90-6
9009-70-8
10108-64-2
REFRIGERANT GAS R22 158 75-45-6
REFRIGERANT GAS R11 161 75-69-4
TOUCH-N FOAM INSTANT INSULATION 1367-48-5
75-71-8
115-10-6
26447-40-5
URETHANE PART A R4-026 110-43-0
108-88-3
1330-20-7
100-41-4
67-64-1
URETHANE PART B R0-090 28182-81-2
110-43-0
ALL STYLES OF FIBERGLASS 65997-17-3
9005-25-8
9002-89-5
HUMISEAL STRIPPER 1075 71-55-6
HUMISEAL THINNER 73 123-86-4
111-76-2
PASTE WOOD FILLER INTERIOR SOLVENT BASE 480 14807-96-6
64742-88-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net