===================== Product Identification =====================
MSDS NAME:CARBON STEEL HR & CR, A36
NIIN:00N017177
MSDS Number: BLCCW
=== Responsible Party ===
Company:A M CASTLE & COMPANY
Address:3400 NORTH WOLF RD
City:FRANKLIN PARK
State:IL
ZIP:60131
Country:US
Info Phone Num:708-455-7111
Emergency Phone Num:708-455-7111
CAGE:11045
=== Contractor Identification ===
Company:CASTLE A M AND CO
Address:3400 N WOLF RD
Box:City:FRANKLIN PARK
State:IL
ZIP:60131-1319
Country:US
Phone:847-455-7111
CAGE:11045
============= Composition/Information on Ingredients =============
Name:IRON. PEL AND TLV AS IRON OXIDE (FUME)
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 97-99%
OSHA PEL:10 MG(FE)/M3 TDUST
ACGIH TLV:5 MG(FE)/M3
Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: <2%
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293
Name:GRAPHITE, SYNTHETIC
CAS:7440-44-0
RTECS #:FF5250100
Fraction by Wt: <2%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293
Name:ALUMINUM (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: <1%
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192
Name:PHOSPHOROUS (YELLOW) (SARA III)
CAS:7723-14-0
RTECS #:TH3500000
Fraction by Wt: <1%
OSHA PEL:0.1 MG/M3
ACGIH TLV:0.1 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:SULFUR. PEL AND TLV AS SO*2.
CAS:7704-34-9
RTECS #:WS4250000
Fraction by Wt: <1%
OSHA PEL:2 PPM; 5 PPM STEL
ACGIH TLV:2 PPM; 5 PPM STEL
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: <1%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:VANADIUM PENTOXIDE (SARA III)
CAS:1314-62-1
RTECS #:YW2460000
Fraction by Wt: <1%
OSHA PEL:C,0.5 MG/M3
ACGIH TLV:0.05 MG/M3RDUST;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:COLOMBIAN
CAS:7440-03-1
Fraction by Wt: <1%
Name:BISMUTH
CAS:7440-69-9
RTECS #:EB2600000
Fraction by Wt: <1%
Name:LEAD (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: <1%
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:SUPP DATA:WELDING/SAWING, BRAZING & GRINDING MAY RELEASE
FUMES/DUSTS WHICH MAY PRESENT HLTH HAZS IF TLV'S ARE EXCEEDED.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM EXPOSURE TO FUMES/DUST MAY
PRODUCE IRRITAITON OF EYES AND RESPIRATORY SYSTEM. INHALATION OF
HIGH CONCENTRATIONS OF FRESHLY FORMED OXIDE FUMES OF IRON,
MANGANESE AND LEAD MAY CAUSE METAL FUM E FEVER CHARACTERIZED BY
METALLIC TASTEIN MOUTH AND IRRITATION OF THROAT & INFLUENZA-LIKE
SYMPTOMS. (EFTS OF OVEREPX)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:CHRONIC INHAL OF HIGH CONCENTRATIONS
OF IRON OXIDE FUMES OR DUST MAY LEAD TO BENIGN PNEUMOCONIOSIS
(SIDEROSIS). INHAL OF HIGH CONC OF FERRIC OXIDE MAY POSS ENHANCE
RISK OF LUNG CANCER DEVELOP MENT IN WORKERS EXPOSED TO PULMONARY
CARCINOGENS. INHAL/INGEST OF LEAD PARTICLES MAY RESULT IN
LEAD-INDUCED (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHAL:IF EXPOSED TO EXCESSIVE LEVELS OF METAL FUMES, REMOVE
TO FRESH AIR, GET MD IMMED. EYE:FLUSH WITH COPIOUS AMOUNTS OF WATER
FOR AT LEAST 15 MINUTES. INGEST:CALL MD IMMEDIATELY.
===================== Fire Fighting Measures =====================
Extinguishing Media:USE EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:STEEL PRODUCTS IN THE SOLID STATE PRESENT NO
FIRE OR EXPLOSION HAZARD. WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT
================== Accidental Release Measures ==================
Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:IN WELDING, PRECAUTIONS SHOULD BE
TAKEN FOR AIRBORNE CONTAMINANTS WHICH MAY ORIGINATE FROM COMPONENTS
OF THE WELDING ROD.
Other Precautions:ARC OR SPARK GENERATED WHEN WELDING OR BURNING COULD
BE A SOURCE OF IGNITION FOR COMBUSTIBLE AND FLAMMABLE MATERIALS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED DUST AND FUME, RESPIRATOR
SHOULD BE USED TO AVOID EXCESSIVE INHALATION OF PARTICULATES WHEN
EXPOSURE EXCEEDS TLV'S.
Ventilation:LOC EXHST VENT SHOULD BE UTILIZED WHEN WELDING, BURNING,
SAWING, BRAZING, GRINDING/MACHINING WHEN EXPOSURE EXCEEDS TLV'S
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED BY WELDING STANDARDS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP:SYSTEMIC TOX. SYMPS OF LEAD POISONING INCLUDE ABDOMINAL
CRAMPS, ANEMIA, MUSCLE WEAKNESS & HDCH. PRLNGD EXPOS CAN CAUSE
BEHAVIORAL CHANGES, KIDNEY DMG, CNS DMG & REPRO EFTS. STEEL PRODS
IN NATURAL STATE DO NOT PRESENT AN INHAL, INGEST OR CONTACT HAZ.
HOWEVER, OPERATIONS SUCH AS BURNING, (SEE ING 12)
================== Physical/Chemical Properties ==================
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>2500F
Spec Gravity:APPROXIMATELY 7
Appearance and Odor:GRAY-BLACK SOLID, ODORLESS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACIDS TO PRODUCE HYDROGEN GAS.
Hazardous Decomposition Products:METALLIC DUST OR FUMES MAY BE PRODUCED
DURING WELDING, BURNING, GRINDING AND POSSIBLY MACHINING. REFER TO
ANSI Z49.1
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
OVEN & GRIDDLE CLEANER, 356
| 1310-58-3
112-34-5 |
|
OVEN & GRIDDLE AEROSOL R, 801
| 75-28-5
1310-73-2 |
|
PC70 THINNER
| 67-63-0
67-56-1 |
|
XM 27.324 THINNER FOR SOLDER CREAM
| |
|
AQUEOUS AMINE SOLUTION
| 110-91-8
108-91-8 |
|
ELECTRODE CLEANING SOLUTION
| 67-56-1
7647-01-0 |
|
FUEL OIL, 008102
| 68334-30-5 |
|
ACRAGLAS GEL RESIN
| 1675-54-3 |
|
CARBON STEEL HR & CR, A36
| 7439-89-6
7439-96-5
7440-44-0
7429-90-5
7723-14-0
7704-34-9
7440-21-3
1314-62-1
7440-03-1
7440-69-9
7439-92-1 |
|
BRAYCO MICRONIC 883 RED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
BRAYCO MICRONIC 883 UNDYED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
OMC POWER TRIM FLUID, 60-375
| 64741-89-5
64741-88-4 |
|
OMC HI-VIS GEAR LUBE, 31-250
| 64741-88-4
64742-01-4 |
|
ULTRA STICK RP 8OZ BRUSH TOP, 45051
| 78-93-3
25014-31-7
9011-29-4
8050-31-5
112945-52-5
9003-55-8
108-88-3
110-54-3
142-82-5 |
|
DARINA GREASE AX, 70330
| 1302-78-9
68910-93-0
7632-00-0
64742-52-5
64742-57-0 |
|
ROTELLA OIL 30, 54003
| 64742-54-7
64742-18-3 |
|
N,N-DIMETHYLFORMAMIDE, 99.9+%,HPLC GRADE, 2
| 68-12-2 |
|
DEVCLAD 182 GRAY CONVERTER, 182C0210
| 14807-96-6
1344-95-2 |
|
SAVIN PRISM I CYAN COLOR DEVELOPER, 8231
| |
|
SAVIN PRISM I DRY YELLOW INK/TONER, 8227
| |
|
SAVIN PRISM I DRY CYAN INK/TONER, 8225
| |
|
SAVIN PRISM I DRY BLACK INK/TONER 8221
| 1333-86-4 |
|
SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
| |
|
SAVIN PRISM I BLACK COLOR DEVELOPER, 8229
| 1333-86-4 |
|
ARACAST XU AY 238
| 15336-82-0 |
|
TINUVIN 292
| 41556-26-7
82919-37-7 |
|
FLAME RETARDANT FLOOR COVERING
| 7783-20-2
7783-28-0 |
|
UNDERCOATER SOUND DEADNER
| 75-09-2
64742-89-8
8052-42-4
74-98-6
75-28-5 |
|
BOILER TRT, 2462
| 7681-57-4 |
|
SUNOCO MULTI-PURPOSE 2EP
| 7620-77-1
64742-65-0
15377-18-5
68511-50-2
8052-42-4
68457-79-4 |
|
EPOXY RESIN COMPONENT, 10-347-1R
| 25068-38-6
7631-86-9 |
|
EPOXY HARDNER, 10-347-2R
| 112-24-3
7631-86-9 |
|
STEPAN FOAM KB8820 188200
| |
|
EASY-COTE (179559) 654
| |
|
SAFETY-KLEEN GENERAL PURPOSE CLEANER 666 50
| 6834-92-0
497-19-8
7601-54-9
8002-09-3
518-47-8 |
|
COVENTRY S/G SUPER WHITE 0133517
| 57-55-6
13463-67-7 |
|
UNITED 695
| 586-62-9
7705-14-8
80-56-8
79-92-5
99-86-5 |
|
NAMALAC - WHITE 0003016
| 8052-41-3
13463-67-7 |
|
CPS 5000 SERIES COLOR #16515 GRAY 941 SP
| 64742-89-8 |
|
1288 CLEAR SEAL
| |
|
TEMPLATE EMULSIONS
| 7783-96-2
7783-90-6
9009-70-8
10108-64-2 |
|
REFRIGERANT GAS R22 158
| 75-45-6 |
|
REFRIGERANT GAS R11 161
| 75-69-4 |
|
TOUCH-N FOAM INSTANT INSULATION
| 1367-48-5
75-71-8
115-10-6
26447-40-5 |
|
URETHANE PART A R4-026
| 110-43-0
108-88-3
1330-20-7
100-41-4
67-64-1 |
|
URETHANE PART B R0-090
| 28182-81-2
110-43-0 |
|
ALL STYLES OF FIBERGLASS
| 65997-17-3
9005-25-8
9002-89-5 |
|
HUMISEAL STRIPPER 1075
| 71-55-6 |
|
HUMISEAL THINNER 73
| 123-86-4
111-76-2 |
|
PASTE WOOD FILLER INTERIOR SOLVENT BASE 480
| 14807-96-6
64742-88-7 |
|
|