===================== Product Identification =====================
MSDS NAME:SAFETY-KLEEN GENERAL PURPOSE CLEANER 666 50
NIIN:00N017247
MSDS Number: BLCFF
=== Responsible Party ===
Company:SAFETY-KLEEN CORPORATION
Address:777 BIG TIMBER ROAD
City:ELGIN
State:IL
ZIP:60123
Country:US
Info Phone Num:708-697-8460
Emergency Phone Num:800-942-5969;800-424-9300(CHEMTREC)
CAGE:30530
=== Contractor Identification ===
Company:SAFETY-KLEEN CORP
Address:1301 GERVAIS ST, SUITE 300
Box:City:COLUMBIA
State:SC
ZIP:29201
Country:US
Phone:1-803-933-4200
CAGE:30530
============= Composition/Information on Ingredients =============
Name:SILICIC ACID (H*2SIO*3), DISODIUM SALT; (SODIUM
METASILICATE). ACGIH TLV GIVEN BY MFR FOR SODIUM HYDROXIDE.
CAS:6834-92-0
RTECS #:VV9275000
Fraction by Wt: <65%
ACGIH TLV:2 MG/M3, C (MFR)
Name:SODIUM CARBONATE (2:1). LIMITS GIVEN BY MFR FOR
PARTICULATES NOT OTHERWISE CLASSIFIED.
CAS:497-19-8
RTECS #:VZ4050000
Fraction by Wt: <25%
OSHA PEL:15MG/M3 TDUST;5RDUST
ACGIH TLV:10 MG/M3
Name:SODIUM PHOSPHATE, TRIBASIC (SARA III)
CAS:7601-54-9
RTECS #:TC9490000
Fraction by Wt: <5%
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:PINE OIL
CAS:8002-09-3
RTECS #:TK5100000
Fraction by Wt: <0.5%
Name:FLUORESCEIN, DISODIUM SALT; (URANINE DYE)
CAS:518-47-8
RTECS #:LM5425000
Fraction by Wt: <0.025%
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN:CORR-MAY CAUSE SEVERE
IRRIT TO SKIN W/POSS PAIN & BLISTERING. EYES:CONT W/DUST/MIST WILL
CAUSE SEVERE IRRIT. MATL IS CORR & EXPOS MAY CAUSE REDNESS, PAIN,
BLURRED VISION & CORNEAL DMG. INH AL:DUSTS/MISTS ARE CORR TO MUC
MEMB OF UPPER RESP SYSTEM. SEVERE IRRIT & POSS PULM EDEMA MAY
OCCUR.(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INGEST:WILL CAUSE IRRIT OF THE MOUTH
& GI TRACT FOLLOWED BY NAUS, ABDOM PAIN, VOMIT & LOCAL TISS
DESTRUCT. DELAYED GASTRIC PERFORATION MAY RESULT. CHRONIC:
SKIN:PRLNGD CONT MAY CAUSE SKIN UL CERS. EYES:PRLNGD CONT MAY CAUSE
CORNEAL DMG. INHAL:PRLNGD CONT W/DUST/MIST MAY RESULT IN
PERFORATION OF NASAL SEPTUM.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH PRE-EXISTING LUNG
OR SKIN DYSFUNCTION MAY HAVE INCREASED SUSCEPTIBILITY TO EFFECTS OF
THE EXPOSURE. CONTACT WITH SKIN MAY AGGRAVATE PRE-EXISTING
DERMATITIS.
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR AT LEAST 20 MIN LIFTING UPPER & LOWER
LIDS OCCASNLY. GET MD IMMED. IF IRRIT/REDNESS FROM EXPOS TO
VAPS/MISTS DEVELOP, MOVE VICTIM AWAY FROM EXPOS & IN FRESH AIR.
SKIN: REMOVE C ONTAM CLTHG. WASH SKIN TWICE W/SOAP & WATER. IF
IRRIT PERSISTS, GET MD. INGEST: IF CONSCIOUS, DILUTE W/4 TO 8 OZ OF
WATER & GET MD IMMED. DO NOT INDUCE VOMIT. INHAL: REMOVE TO FRESH
AIR (SUPP DATA)
===================== Fire Fighting Measures =====================
Flash Point:NON-FLAMMABLE
Extinguishing Media:THIS PRODUCT IS NON-COMBUSTIBLE. WATER SPRAY, DRY
CHEMICAL, CO*2 OR FOAM MAY BE USED IN AREAS WHERE THIS PROD IS
STORED.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT WHERE THERE IS A POTENTIAL FOR EXPOSURE TO
SMOKE, FUMES, COMBUSTIBLE PRODUCTS.
Unusual Fire/Explosion Hazard:PROTECTIVE CLOTHING FOR SKIN AND EYE
PROTECTION SHOULD BE WORN TO PROTECT AGAINST HIGHLY ALKALINE
MATERIALS.
================== Accidental Release Measures ==================
Spill Release Procedures:DO NOT TOUCH MATL. ISOLATE AREA AND DENY
ENTRY. VENT AREA AND AVOID BRTHG VAPS AND/OR MISTS. ABSORB ONTO
SAND OR OTHER ABSORBENT MATERIAL. SHOVEL INTO CLOSABLE CONTAINER
FOR DISPOSAL. WEAR PROT EQUIPM ENT. CONTAIN AWAY FROM SURF WATERS &
SEWERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:EMPTY PROD CNTNRS MAY CONTAIN PROD
RESIDUE. DO NOT PRESSURIZE, CUT, HEAT, WELD, GRIND OR EXPOSE CNTNRS
TO FLAME/OTHER SOURCES OF IGNITION.
Other Precautions:KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE AND
DURING TRANSPORT. DO NOT GET IN EYES, ON SKIN OR CLOTHING. AVOID
BREATHING DUST OR MIST. DO NOT SMOKE WHEN USING THIS PRODUCT.
CONTACT LENSES SHOULD N OT BE WORN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPRVD RESP PROT EQUIP WHEN CONC
OF DUST EXCEEDS APPLICABLE EXPOS LIMIT. DEPENDING ON AIRBORNE CONC,
USE A NIOSH/MSHA APPRVD RESP/GAS MASK W/APPROP CARTRIDGES &
CANISTERS (DUST FILTER). SELECTION & USE OF RESP (SEE SUPP DATA)
Ventilation:PROVIDE LOC EXHST/GENERAL DILUTION VENT AS DETERMINED
NECESSARY TO MAINTAIN CONC OF DUST BELOW APPLIC EXPOS LIMITS.
Protective Gloves:NEOPRENE GLOVES TO PREVENT CONT W/SKIN.
Eye Protection:CHEM WORK GOGG. MAY ADD FULL (SUPP DATA)
Other Protective Equipment:CLEAN WATER FOR FLUSHING EYES & SKIN. RUBBER
BOOTS, APRON & OTHER PROT CLTHG. EMER EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:USE GOOD PERS HYGIENE. WASH THORO W/SOAP AND
WATER AFTER HANDLING AND BEFORE EATING, DRINKING OR USING TOBACCO
PRODS.
Supplemental Safety and Health
PH: 1% SOLN= 12.0. FIRST AID PROC: IMMED. USE OXYGEN IF THERE IS
DIFFICULTY BRTHG/ARTF RESP IF BRTHG HAS STOPPED. DO NOT LEAVE
VICTIM UNATTENDED. GET MD IMMED IF NEC. RESP PROT: PROTECTIVE EQUIP
SHOUL D BE I/A/W OSHA GENERAL INDUSTRY STANDARD 29 CFR
1910.134-RESP PROT. EYE: LENGTH FACESHIELD TO GOGGLES .
================== Physical/Chemical Properties ==================
HCC:B3
Melt/Freeze Pt:M.P/F.P Text:162F,72C
Spec Gravity:60.5 LBS/CU FT
pH:SUPDAT
Solubility in Water:28%
Appearance and Odor:POWDER - UNIFORM, GRANULAR, FREE-FLOWING,
YELLOW/GREEN WITH PINE OIL ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS (E.G. CHLORINE, PEROXIDES, STRONG ACIDS).
Stability Condition to Avoid:COULD BE CORROSIVE TO ALUMINUM SURFACES
DUE TO HIGH PH.
Hazardous Decomposition Products:WHEN HEATED TO DECOMPOSITION PRODUCT,
MAY EMIT TOXIC FUMES OF SODIUM AND POTASSIUM.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
OVEN & GRIDDLE CLEANER, 356
| 1310-58-3
112-34-5 |
|
OVEN & GRIDDLE AEROSOL R, 801
| 75-28-5
1310-73-2 |
|
PC70 THINNER
| 67-63-0
67-56-1 |
|
XM 27.324 THINNER FOR SOLDER CREAM
| |
|
AQUEOUS AMINE SOLUTION
| 110-91-8
108-91-8 |
|
ELECTRODE CLEANING SOLUTION
| 67-56-1
7647-01-0 |
|
FUEL OIL, 008102
| 68334-30-5 |
|
ACRAGLAS GEL RESIN
| 1675-54-3 |
|
CARBON STEEL HR & CR, A36
| 7439-89-6
7439-96-5
7440-44-0
7429-90-5
7723-14-0
7704-34-9
7440-21-3
1314-62-1
7440-03-1
7440-69-9
7439-92-1 |
|
BRAYCO MICRONIC 883 RED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
BRAYCO MICRONIC 883 UNDYED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
OMC POWER TRIM FLUID, 60-375
| 64741-89-5
64741-88-4 |
|
OMC HI-VIS GEAR LUBE, 31-250
| 64741-88-4
64742-01-4 |
|
ULTRA STICK RP 8OZ BRUSH TOP, 45051
| 78-93-3
25014-31-7
9011-29-4
8050-31-5
112945-52-5
9003-55-8
108-88-3
110-54-3
142-82-5 |
|
DARINA GREASE AX, 70330
| 1302-78-9
68910-93-0
7632-00-0
64742-52-5
64742-57-0 |
|
ROTELLA OIL 30, 54003
| 64742-54-7
64742-18-3 |
|
N,N-DIMETHYLFORMAMIDE, 99.9+%,HPLC GRADE, 2
| 68-12-2 |
|
DEVCLAD 182 GRAY CONVERTER, 182C0210
| 14807-96-6
1344-95-2 |
|
SAVIN PRISM I CYAN COLOR DEVELOPER, 8231
| |
|
SAVIN PRISM I DRY YELLOW INK/TONER, 8227
| |
|
SAVIN PRISM I DRY CYAN INK/TONER, 8225
| |
|
SAVIN PRISM I DRY BLACK INK/TONER 8221
| 1333-86-4 |
|
SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
| |
|
SAVIN PRISM I BLACK COLOR DEVELOPER, 8229
| 1333-86-4 |
|
ARACAST XU AY 238
| 15336-82-0 |
|
TINUVIN 292
| 41556-26-7
82919-37-7 |
|
FLAME RETARDANT FLOOR COVERING
| 7783-20-2
7783-28-0 |
|
UNDERCOATER SOUND DEADNER
| 75-09-2
64742-89-8
8052-42-4
74-98-6
75-28-5 |
|
BOILER TRT, 2462
| 7681-57-4 |
|
SUNOCO MULTI-PURPOSE 2EP
| 7620-77-1
64742-65-0
15377-18-5
68511-50-2
8052-42-4
68457-79-4 |
|
EPOXY RESIN COMPONENT, 10-347-1R
| 25068-38-6
7631-86-9 |
|
EPOXY HARDNER, 10-347-2R
| 112-24-3
7631-86-9 |
|
STEPAN FOAM KB8820 188200
| |
|
EASY-COTE (179559) 654
| |
|
SAFETY-KLEEN GENERAL PURPOSE CLEANER 666 50
| 6834-92-0
497-19-8
7601-54-9
8002-09-3
518-47-8 |
|
COVENTRY S/G SUPER WHITE 0133517
| 57-55-6
13463-67-7 |
|
UNITED 695
| 586-62-9
7705-14-8
80-56-8
79-92-5
99-86-5 |
|
NAMALAC - WHITE 0003016
| 8052-41-3
13463-67-7 |
|
CPS 5000 SERIES COLOR #16515 GRAY 941 SP
| 64742-89-8 |
|
1288 CLEAR SEAL
| |
|
TEMPLATE EMULSIONS
| 7783-96-2
7783-90-6
9009-70-8
10108-64-2 |
|
REFRIGERANT GAS R22 158
| 75-45-6 |
|
REFRIGERANT GAS R11 161
| 75-69-4 |
|
TOUCH-N FOAM INSTANT INSULATION
| 1367-48-5
75-71-8
115-10-6
26447-40-5 |
|
URETHANE PART A R4-026
| 110-43-0
108-88-3
1330-20-7
100-41-4
67-64-1 |
|
URETHANE PART B R0-090
| 28182-81-2
110-43-0 |
|
ALL STYLES OF FIBERGLASS
| 65997-17-3
9005-25-8
9002-89-5 |
|
HUMISEAL STRIPPER 1075
| 71-55-6 |
|
HUMISEAL THINNER 73
| 123-86-4
111-76-2 |
|
PASTE WOOD FILLER INTERIOR SOLVENT BASE 480
| 14807-96-6
64742-88-7 |
|
|