===================== Product Identification =====================
MSDS NAME:NAMALAC - WHITE 0003016
NIIN:00N017261
MSDS Number: BLCFP
=== Responsible Party ===
Company:MOBILE PAINT MFG CO INC
Box:717
City:THEODORE
State:AL
ZIP:36582-9315
Country:US
Info Phone Num:205-443-6110
Emergency Phone Num:800-255-3924
CAGE:88633
=== Contractor Identification ===
Company:MOBILE PAINT MANUFACTURING CO INC
Box:717
City:THEODORE
State:AL
ZIP:36582
Country:US
Phone:334-443-6110
CAGE:88633
============= Composition/Information on Ingredients =============
Name:OTHER PREC:CONTAMD CLTHG & SKIN THORO.USE SOAP & H*2O AFTER
HNDLG.CLOSE CNTNRS AFTER EACH USE.DO NOT TRANSFER PROD(ING4)
RTECS #:9999999ZZ
Name:ING 3:TO UNLBLD CNTNRS.DO NOT HANDLE UNTIL MFG SAFETY PREC
HAVE BEEN READ & UNDERSTOOD.KEEP OUT OF REACH OF CHILDREN.
RTECS #:9999999ZZ
Name:RESP PROT: IN CONFINED AREAS USE NIOSH/MSHA APPROVED AIR
LINE TYPE RESPIRATORS OR HOODS.
RTECS #:9999999ZZ
Name:VENT: ON SURFACE COATED WITH THIS PRODUCT. IF BAKING VENT
FUMES.
RTECS #:9999999ZZ
Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 40%
Other REC Limits:525 MG/M3
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 25%
Other REC Limits:15 MG/M3 (MFR)
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: ANESTH. EXCESS INHAL CAN CAUSE
IRRIT OF RESP TRACT, OR ACUTE NERV SYS DEPRESS CHARACT BY HDCH,
DIZ, STAG GAIT, CONFUSN, UNCON, COMA AND EVEN ASPHYX. SKIN: MOD
IRRIT, DEFAT, DERM, MAY BE SENSITI ZER IN SOME PEOPLE. EYES: SEVERE
IRRIT,REDNESS, TEARING, BLURRED VISION, MAY BE SENSITIZER IN
SOME(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:PEOPLE.SKIN ABSORP:RSLT IN SYMP LIKE
INHAL EFTS ABOVE.INGEST:GI IRRIT,NAUS,VOMIT & DIARR.ASPIR INTO
LUNGS DURING INGEST/VOMIT MAY CAUSE MILD TO SEVERE PULM INJURY/POSS
DEATH.REPORTS ASSOC RPT D/PRLNGD OCCUP OVEREXP TO SOLV W/PERM
BRAIN/NERV SYS DMG.INT MISSUSE BY DELIB CONC/INHAL CONTENTS MAY BE
HARMFUL/FATAL.
Medical Cond Aggravated by Exposure:EXPOSURE TO PETROLEUM SOLVENTS MAY
AGGRAVATE PREXISITNG DERMATITIS.
======================= First Aid Measures =======================
First Aid:INHAL: REMOVE TO FRESH AIR. ADMIN O*2 IF BRTHG DFCLT. RESTORE
BRTHG IF NEC. TREAT SYMPTOMATICALLY. CONSULT MD. SKIN: WASH
AFFECTED AREA W/SOAP & H*2O. REMOVE & LAUNDER CONTAM CLTHG. CONSULT
MD IF NEED ED. EYES: FLUSH IMMED W/LRG AMTS OF H*2O FOR AT LST 15
MIN. TAKE TO MD FOR MEDICAL TREATMENT. INGEST: DRINK 1/2 GLASSES OF
H*2O TO DILUTE. DO NOT INDUCE VOMIT. GET MD HELP IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:110F,43C
Lower Limits:0.9
Upper Limits:7.0
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.DURING EMER CNDTN OVEREXP TO DECOMP PROD MAY CAUSE HLTH HAZ.SYMP
MAY NOT BE IMMED APPARENT.GET (SUPP DATA)
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. APPLICATN TO HOT SURFACES REQS SPEC PRECS. H*2O SPRAY
MAY BE INEFT. IF H*2O IS USED, FOG NOZZLES (SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT(FLAME, HOT
SURFACE, & ELECTRICAL, STATIC, OR FRICTION SPARKS). AVOID BREATHING
VAPORS. VENTILATE AREA. CONTAIN & REMOVE WITH INERT ABSORBENT &
NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS ONLY
IN BLDGS DESIGNED TO COMPLY W/OSHA 1910.106. KEEP CLOSURES TIGHT &
CNTNR UPRIGHT TO PRVNT LEAKAGE.
Other Precautions:DO NOT STORE OR USE NEAR HEAT,SPARKS,OR FLAME.NEVER
USE PRESS TO EMPTY.DRUM MUST NOT BE WASHED OUT OR USED FOR OTHER
PURPOSES.DRUMS OF THIS MTRL SHOULD BE GROUNDED WHEN POURING. DO NOT
GET INTO EYES. AVOID SKIN CONTACT (SUPP DATA)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IN OUTDOOR OR OPEN AREAS USE NIOSH/MSHA APPVD
MECH FILTER RESP TO REMOVE SOLID AIR BORNE PARTICLES. IN RESTRICTED
VENT AREAS USE NIOSH/MSHA APPRVD CHEM-MECH FILTERS DISIGNED TO
REMOVE A COMBINATION OF PARTICULATE & GAS/VAPOR. (ING 5)
Ventilation:I/A/W OSHA REGULATION 29 CFR 1910.94,1910.107, 1910.108.
REMOVE DECOMP PRODS FORMED DURING WELDING/FLAME CUTTING (ING 6)
Protective Gloves:RECOMMENDED
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:PROT OUTER WEAR & PRVNT PRLNGD SKIN CONTACT
W/CONTAMINATED CLOTHING.
Work Hygienic Practices:AVOID BREATHING VAPORS & CONTACT WITH SKIN.
WASH SKIN THOROUGHLY BEFORE BREAKS & MEALS & AT END OF WORK PERIOD.
Supplemental Safety and Health
FIRE FIGHT PROC: MD ATTN. KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT,SPARKS & OPEN FLAME. EXPLO HAZ: ARE PREF. H*2O MAY BE USED TO
COOL CLSD CNTNRS TO PRVNT PRESS BUILD-UP. OTHER PREC: CAN CAUSE
ALLE RGIC RESP RXN. CAN CAUSE ALLERGIC SKIN RXN. PRVNT PRLNGD/RPTD
BRTHG OF VAPORS/SPRAY MIST OR SANDING DUST. WASH (ING 3)
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Density:HVR/AIR
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TYPICAL PAINT SOLVENT ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:HIGH TEMPS
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMP AS IN WELDING.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE, AND FEDERAL
REGULATIONS. INCINERATE IN APPROVED FACITLIY. DO NOT INCINERATE
CLOSED CONTAINER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
OVEN & GRIDDLE CLEANER, 356
| 1310-58-3
112-34-5 |
|
OVEN & GRIDDLE AEROSOL R, 801
| 75-28-5
1310-73-2 |
|
PC70 THINNER
| 67-63-0
67-56-1 |
|
XM 27.324 THINNER FOR SOLDER CREAM
| |
|
AQUEOUS AMINE SOLUTION
| 110-91-8
108-91-8 |
|
ELECTRODE CLEANING SOLUTION
| 67-56-1
7647-01-0 |
|
FUEL OIL, 008102
| 68334-30-5 |
|
ACRAGLAS GEL RESIN
| 1675-54-3 |
|
CARBON STEEL HR & CR, A36
| 7439-89-6
7439-96-5
7440-44-0
7429-90-5
7723-14-0
7704-34-9
7440-21-3
1314-62-1
7440-03-1
7440-69-9
7439-92-1 |
|
BRAYCO MICRONIC 883 RED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
BRAYCO MICRONIC 883 UNDYED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
OMC POWER TRIM FLUID, 60-375
| 64741-89-5
64741-88-4 |
|
OMC HI-VIS GEAR LUBE, 31-250
| 64741-88-4
64742-01-4 |
|
ULTRA STICK RP 8OZ BRUSH TOP, 45051
| 78-93-3
25014-31-7
9011-29-4
8050-31-5
112945-52-5
9003-55-8
108-88-3
110-54-3
142-82-5 |
|
DARINA GREASE AX, 70330
| 1302-78-9
68910-93-0
7632-00-0
64742-52-5
64742-57-0 |
|
ROTELLA OIL 30, 54003
| 64742-54-7
64742-18-3 |
|
N,N-DIMETHYLFORMAMIDE, 99.9+%,HPLC GRADE, 2
| 68-12-2 |
|
DEVCLAD 182 GRAY CONVERTER, 182C0210
| 14807-96-6
1344-95-2 |
|
SAVIN PRISM I CYAN COLOR DEVELOPER, 8231
| |
|
SAVIN PRISM I DRY YELLOW INK/TONER, 8227
| |
|
SAVIN PRISM I DRY CYAN INK/TONER, 8225
| |
|
SAVIN PRISM I DRY BLACK INK/TONER 8221
| 1333-86-4 |
|
SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
| |
|
SAVIN PRISM I BLACK COLOR DEVELOPER, 8229
| 1333-86-4 |
|
ARACAST XU AY 238
| 15336-82-0 |
|
TINUVIN 292
| 41556-26-7
82919-37-7 |
|
FLAME RETARDANT FLOOR COVERING
| 7783-20-2
7783-28-0 |
|
UNDERCOATER SOUND DEADNER
| 75-09-2
64742-89-8
8052-42-4
74-98-6
75-28-5 |
|
BOILER TRT, 2462
| 7681-57-4 |
|
SUNOCO MULTI-PURPOSE 2EP
| 7620-77-1
64742-65-0
15377-18-5
68511-50-2
8052-42-4
68457-79-4 |
|
EPOXY RESIN COMPONENT, 10-347-1R
| 25068-38-6
7631-86-9 |
|
EPOXY HARDNER, 10-347-2R
| 112-24-3
7631-86-9 |
|
STEPAN FOAM KB8820 188200
| |
|
EASY-COTE (179559) 654
| |
|
SAFETY-KLEEN GENERAL PURPOSE CLEANER 666 50
| 6834-92-0
497-19-8
7601-54-9
8002-09-3
518-47-8 |
|
COVENTRY S/G SUPER WHITE 0133517
| 57-55-6
13463-67-7 |
|
UNITED 695
| 586-62-9
7705-14-8
80-56-8
79-92-5
99-86-5 |
|
NAMALAC - WHITE 0003016
| 8052-41-3
13463-67-7 |
|
CPS 5000 SERIES COLOR #16515 GRAY 941 SP
| 64742-89-8 |
|
1288 CLEAR SEAL
| |
|
TEMPLATE EMULSIONS
| 7783-96-2
7783-90-6
9009-70-8
10108-64-2 |
|
REFRIGERANT GAS R22 158
| 75-45-6 |
|
REFRIGERANT GAS R11 161
| 75-69-4 |
|
TOUCH-N FOAM INSTANT INSULATION
| 1367-48-5
75-71-8
115-10-6
26447-40-5 |
|
URETHANE PART A R4-026
| 110-43-0
108-88-3
1330-20-7
100-41-4
67-64-1 |
|
URETHANE PART B R0-090
| 28182-81-2
110-43-0 |
|
ALL STYLES OF FIBERGLASS
| 65997-17-3
9005-25-8
9002-89-5 |
|
HUMISEAL STRIPPER 1075
| 71-55-6 |
|
HUMISEAL THINNER 73
| 123-86-4
111-76-2 |
|
PASTE WOOD FILLER INTERIOR SOLVENT BASE 480
| 14807-96-6
64742-88-7 |
|
|