|
|
| ===================== Product Identification ===================== MSDS NAME:N,N-DIMETHYLFORMAMIDE, 99.9+%,HPLC GRADE, 2 NIIN:00N017197 MSDS Number: BLCDH === Responsible Party === Company:ALDRICH CHEMICAL CO Box:355 City:MILWAUKEE State:WI ZIP:53201 Info Phone Num:414-273-3850 Emergency Phone Num:414-273-3850 CAGE:60928 === Contractor Identification === Company:ALDRICH CHEMICAL CO INC Address:1001 WEST ST PAUL AVE Box:355 City:MILWAUKEE State:WI ZIP:53233 Country:US Phone:414-273-3850 CAGE:60928 ============= Composition/Information on Ingredients ============= Name:DIMETHYLFORMAMIDE CAS:68-12-2 RTECS #:LQ2100000 Fraction by Wt: 99.9% OSHA PEL:S, 10 PPM ACGIH TLV:S, 10 PPM; 9192 EPA Rpt Qty:1 LB DOT Rpt Qty:1 LB Name:THE MANUFACTURER STATES THAT NO HAZARDOUS INGREDIENTS ARE PRESENT IN THIS PRODUCT. RTECS #:9999999ZZ Other REC Limits:NONE SPECIFIED ===================== Hazards Identification ===================== LD50 LC50 Mixture:LD50:(ORAL,RAT)2800 MG/KG Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE: HARMFUL IF SWALLOWED, INHALED, OR ABSORBED THROUGH SKIN. VAPOR OR MIST IS IRRIT TO EYES, MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT. CAUSES SKIN IRRITATION. EXPOSURE CAN CAUSE STOMACH PAINS, VOMITING, DIARRHEA, NAUSEA, DIZZINESS AND HEADACHE. CHRONIC: DAMAGE TO LIVER AND KIDNEYS. Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= Eyes: FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. ASSURE ADEQUATE FLUSHING OF EYES BY SEPARATING EYELIDS WITH FINGERS. SKIN:FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MIN WHI LE REMOVING CONTAM CLOTHING AND SHOES. INHAL: REMOVE TO FRESH AIR. IF NOT BRTHG GIVE ARTF RESP. IF BRTHG IS DIFFICULT, GIVE O*2. CALL A PHYS. INGEST: CALL MD IMMEDIATELY . ===================== Fire Fighting Measures ===================== Flash Point:136F,58C Lower Limits:2.2% Upper Limits:15.2% Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL POWDER, ALCOHOL OR POLYMER FOAM. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . COMBUSTIBLE. Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS. ================== Accidental Release Measures ================== Spill Release Procedures:SHUT OFF ALL SOURCES OF IGNITION. WEAR NIOSH/MSHA APPRVD SCBA, RUBBER BOOTS AND HEAVY RUBBER GLOVES. ABSORB ON SAND OR VERMICULITE AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT BREATH VAP. AVOID CONTACT W/EYES, SKIN & CLTHG. AVOID PRLNGD/RPTD EXPOS. READILY ABSORBED THROUGH SKIN. WASH THORO AFTER HANDLING. Other Precautions:IRRITANT. KEEP TIGHTLY CLOSED. KEEP AWAY FROM HEAT AND OPEN FLAME. STORE IN A COOL DRY PLACE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA-APPROVED RESPIRATOR. Ventilation:MECHANICAL EXHAUST REQUIRED. Protective Gloves:CHEMICAL-RESISTANT GLOVES. Eye Protection:CHEMICAL WORKERS GOGGLES.(SEE SUPP DATA) Other Protective Equipment:IMPERVIOUS PROTECTIVE CLOTHING. SAFETY SHOWER AND EYE BATH. Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE. DISCARD CONTAMINATED SHOES. Supplemental Safety and Health EYE PROT: MAY ADD FULL LENGTH FACESHIELD TO GOGGLES . ================== Physical/Chemical Properties ================== HCC:F4 Boiling Pt:B.P. Text:307F,153C Melt/Freeze Pt:M.P/F.P Text:-78F,-61C Vapor Pres:2.7MM @20C Vapor Density:2.5 Spec Gravity:0.944 Appearance and Odor:COLORLESS LIQUID. ================= Stability and Reactivity Data ================= ACID CHLORIDES, OXIDIZING AGENTS, CHLOROFORMATES, REDUCING AGENTS, HALOGENS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE CARBON MONOXIDE, CARBON DIOXIDE, AND NITROGEN OXIDES. ==================== Disposal Considerations ==================== Waste Disposal Methods:THIS COMBUSTIBLE MATERIAL MAY BE BURNED IN A CHEMICAL INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE AND LOCAL LAWS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation. *** END OF RECORD *** |
Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net
Last modified: 05/25/2025 01:55:25
Chemcas.com| Ads link:todaystock.net
Last modified: 05/25/2025 01:55:25