===================== Product Identification =====================
MSDS NAME:DEVCLAD 182 GRAY CONVERTER, 182C0210
NIIN:00N017210
MSDS Number: BLCDJ
=== Responsible Party ===
Company:DEVOE COATINGS COMPANY
Address:4000 DUPONT CIR
City:LOUISVILLE
State:KY
ZIP:40207
Info Phone Num:502-897-9861
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:1HK86
=== Contractor Identification ===
Company:DEVOE COATINGS CO
Address:4000 DUPONT CIRCLE
Box:7600
City:LOUISVILLE
State:KY
ZIP:40207-4802
Country:US
Phone:502-897-9861
CAGE:1HK86
============= Composition/Information on Ingredients =============
Name:INGRED 13: ELIMINATE ALL IGNITION SOURCES.
RTECS #:9999999ZZ
Name:OTHER PREC: IF MATL IS PART OF A TWO COMPONENT PROD, THEN
MIXTURE OF BASE & CONVERTER PORTIONS WILL HAVE HAZ(SEE ING 16)
RTECS #:9999999ZZ
Name:INGRED 15: OF BOTH COMPONENTS. OBSERVE ALL APPLICABLE PREC.
RTECS #:9999999ZZ
Name:AMINE COMPOUND
Fraction by Wt: 50%
Name:TETRASODIUM PYROPHATE
Fraction by Wt: <5%
Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 35%
Other REC Limits:20 MPPCF (MFR)
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192
Name:CALCIUM SILICATE
CAS:1344-95-2
RTECS #:VV9150000
Fraction by Wt: 10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9192
Name:SUPP DATA:CAUSE HLTH HAZ. SYMP MAY NOT BE IMMED APPARENT.
OBTAIN MEDICAL ATTENTION.
RTECS #:9999999ZZ
Name:FIRST AID PROC:INGEST: INTENTIONAL MISUSE BY DELIBERATELY
CONC & INHALING CONTENTS MAY BE HARMFUL/FATAL.
RTECS #:9999999ZZ
Name:SPILL PROC: W/INERT ABSORBENT AND NON-SPARKING TOOLS. STORE
IN CLSD CNTNR UNTIL PROPERLY DISPOSED OF.
RTECS #:9999999ZZ
Name:RESP PROT: WHEN USED IN RESTRICTED VENT AREAS, WEAR
NIOSH/MSHA APPRVD CHEM/MECH FILTER DESIGNED TO REMOVE (SEE ING 10)
RTECS #:9999999ZZ
Name:INGRED 8:A COMBINATION OF PARTICULATES & VAP. WHEN USED IN
CONFINED AREAS, WEAR NIOSH/MSHA APPRVD AIR SUPP (SEE ING 10)
RTECS #:9999999ZZ
Name:INGRED 9:RESP/USE HOODS. USE NIOSH/MSHA APPRVD RESP WHEN
FLAME CUTTING, WELDING, BRAZING & SANDING MATL COATED W/PROD.
RTECS #:9999999ZZ
Name:VENT: APPLICABLE SAFETY & HLTH STANDARDS IN MIXING,
APPLICATION & CURING AREAS & TO REMOVE SANDING DUSTS OF (SEE ING
12)
RTECS #:9999999ZZ
Name:INGRED 11: DRIED COATINGS & DECOMP PROD DURING WELDING &
FLAME CUTTING ON SURFS COATED W/PROD. VAPS MAY (SEE INGRED 13)
RTECS #:9999999ZZ
Name:INGRED 12: SPREAD LONG DISTANCES. PVNT BUILD-UP BY REMOVING
HEAVY SOLVENT VAPS FROM LOWER LEVS OF WORK AREA.(SEE ING 14)
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: BREATHING: IRRIT OF RESP TRACT;
HDCH, NAUSEA, DIZZ, WEAKNESS AND FATIGUE. EXTREME EXPOS CAN RSLT IN
UNCONSCIOUSNESS & EVEN RESP ARREST. SKIN/EYE CONTACT: CAUSES EYE &
SKIN IRRIT. MAY BE HARMFUL IF ABSORBED THROUGH SKIN. INGEST: CAN
CAUSE STOMACH &/OR INTESTINAL IRRIT, NAUSEA, VOMIT & (SEE EFTS OF
OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: DIARRHEA. CHRONIC: REPORTS HAVE
ASSOCIATED RPTD & PRLNGD OCCUPATIONAL OVEREXPO TO SOLV W/PERM BRAIN
AND NERVOUS SYSTEM DAMAGE. PROLONGED OR REPEATED BREATHING OF SPRAY
MIST &/OR SANDING DUS T OVER A PERIOD OF YEARS MAY CAUSE
DUSTDISEASE OF LUNGS.
Medical Cond Aggravated by Exposure:NONE, WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.
======================= First Aid Measures =======================
First Aid:INHAL: OBTAIN FRESH AIR. IF CONTINUED DFCLTY IS EXPER, GET MD
IMMED. IF BRTHG CEASES, GIVE ARTF/RESP & CALL MD IMMED. EYE: FLUSH
IMMED W/LRG AMTS OF H*2O FOR AT LST 15 MIN. GET MED ASSIST. SKIN:
WASH AFFECTED AREA W/SOAP & H*2O . REMOVE SOILED CLTHG. GET MED
ASSISTANCE IF IRRIT PERSISTS. INGEST: GET MD IMMED. NOTICE: (SEE
ING 6)
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:100F,38C
Extinguishing Media:CO*2 DRY CHEMICAL, FOAM, OR OTHER NATIONAL FIRE
PROTECTION ASSOCIATION (NFPA) APPRVD METH FOR TREATING CLASS B
FIRES.
Fire Fighting Procedures:SUMMON PROFESSIONAL FIREFIGHTERS. USE
NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H*2O SPRAY MAY BE
INEFFECTIVE. IF H*2O IS USED, FOG NOZ (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & FLAME. DUE TO PRESS BUILD-UP, CLSD
CNTNRS EXPOSED TO EXTREME HEAT MAY EXPLODE.(SEE SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFS, & ELEC, STATIC/FRICTIONAL SPARKS). PVNT BRTHG OF VAPS. VENT
AREA. BEFORE ATTEMPTING CLEAN-UP, REFER TO HAZ CAUTION INFORMATION
IN OTHER SECTIONS OF M SDS. CONTAIN SPILLED MATL & REMOVE(SEE
INGRED 7)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & FLAMES.
DO NOT SMOKE. PVNT BUILD-UP OF VAPS BY MAINTAINING CONTINUOUS FLOW
OF FRESH AIR.
Other Precautions:DO NOT STORE ABOVE 120 F/NEAR FIRE/OPEN FLAME. STORE
LRG QTYS IN BUILDINGS TO COMPLY W/OSHA 1910.106. KEEP CNTNR CLSD
WHEN NOT IN USE. DO NOT TRANSFER CONTENTS TO BOTTLES/OTHER
UNLABELLED CNTNRS.DO NO T REUSE EMPTY CNTNRS.(SEE INGRED 15)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:DO NOT BRTH VAPS, SPRAY MIST/SANDING DUST. WHEN
SPRAY APPLIED IN OUTDOOR/OPEN AREAS, & DURING SANDING/GRINDING
OPER, USE NIOSH/MSHA APPRVD MECH FILTER RESP TO REMOVE SOLID
AIRBORNE PARTICLES OF OVERSP RAY & SANDING DUST. (SEE INGRED 8)
Ventilation:PROVIDE GEN DILUTION/LOCAL EXHAUST VENT IN VOLUME & PATTERN
TO KEEP AIR CONTAMINANT CONC BELOW CURRENT (SEE INGRED 11)
Protective Gloves:IMPERMEABLE GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERMEABLE CLOTHING AND BOOTS TO PREVENT
SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: PREFERABLE. IF EXPOSED TO FIRE/EXTREME HEAT, H*2O
SHOULD BE USED TO COOL CLSD CNTNRS & PVNT PRESS BUILD UP/POS
AUTO-IGNIT. EXPLO HAZ: NEVER USE A WELDING/CUTTING TORCH ON/NEAR
CNTNR ( EVEN EMPTY) AS PROD/ITS RESIDUE MAY IGNITE. DURING EMER
CONDITIONS OVEREXP TO DECOMP PROD MAY CAUSE HLTH (SEE INGRED 5)
================== Physical/Chemical Properties ==================
HCC:F6
Boiling Pt:B.P. Text:340F,171C
Vapor Pres:<1
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE TOXIC FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CO, CO*2, OXIDES OF PHOSPHORUS, OXIDES OF
NITROGEN.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPRVD FACILITY. DO NOT
INCINERATE CLOSED CNTNRS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
OVEN & GRIDDLE CLEANER, 356
| 1310-58-3
112-34-5 |
|
OVEN & GRIDDLE AEROSOL R, 801
| 75-28-5
1310-73-2 |
|
PC70 THINNER
| 67-63-0
67-56-1 |
|
XM 27.324 THINNER FOR SOLDER CREAM
| |
|
AQUEOUS AMINE SOLUTION
| 110-91-8
108-91-8 |
|
ELECTRODE CLEANING SOLUTION
| 67-56-1
7647-01-0 |
|
FUEL OIL, 008102
| 68334-30-5 |
|
ACRAGLAS GEL RESIN
| 1675-54-3 |
|
CARBON STEEL HR & CR, A36
| 7439-89-6
7439-96-5
7440-44-0
7429-90-5
7723-14-0
7704-34-9
7440-21-3
1314-62-1
7440-03-1
7440-69-9
7439-92-1 |
|
BRAYCO MICRONIC 883 RED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
BRAYCO MICRONIC 883 UNDYED
| 115-86-6
68037-01-4
118-82-1
29385-43-1 |
|
OMC POWER TRIM FLUID, 60-375
| 64741-89-5
64741-88-4 |
|
OMC HI-VIS GEAR LUBE, 31-250
| 64741-88-4
64742-01-4 |
|
ULTRA STICK RP 8OZ BRUSH TOP, 45051
| 78-93-3
25014-31-7
9011-29-4
8050-31-5
112945-52-5
9003-55-8
108-88-3
110-54-3
142-82-5 |
|
DARINA GREASE AX, 70330
| 1302-78-9
68910-93-0
7632-00-0
64742-52-5
64742-57-0 |
|
ROTELLA OIL 30, 54003
| 64742-54-7
64742-18-3 |
|
N,N-DIMETHYLFORMAMIDE, 99.9+%,HPLC GRADE, 2
| 68-12-2 |
|
DEVCLAD 182 GRAY CONVERTER, 182C0210
| 14807-96-6
1344-95-2 |
|
SAVIN PRISM I CYAN COLOR DEVELOPER, 8231
| |
|
SAVIN PRISM I DRY YELLOW INK/TONER, 8227
| |
|
SAVIN PRISM I DRY CYAN INK/TONER, 8225
| |
|
SAVIN PRISM I DRY BLACK INK/TONER 8221
| 1333-86-4 |
|
SAVIN PRISM I DRY MAGENTA INK/TONER, 8223
| |
|
SAVIN PRISM I BLACK COLOR DEVELOPER, 8229
| 1333-86-4 |
|
ARACAST XU AY 238
| 15336-82-0 |
|
TINUVIN 292
| 41556-26-7
82919-37-7 |
|
FLAME RETARDANT FLOOR COVERING
| 7783-20-2
7783-28-0 |
|
UNDERCOATER SOUND DEADNER
| 75-09-2
64742-89-8
8052-42-4
74-98-6
75-28-5 |
|
BOILER TRT, 2462
| 7681-57-4 |
|
SUNOCO MULTI-PURPOSE 2EP
| 7620-77-1
64742-65-0
15377-18-5
68511-50-2
8052-42-4
68457-79-4 |
|
EPOXY RESIN COMPONENT, 10-347-1R
| 25068-38-6
7631-86-9 |
|
EPOXY HARDNER, 10-347-2R
| 112-24-3
7631-86-9 |
|
STEPAN FOAM KB8820 188200
| |
|
EASY-COTE (179559) 654
| |
|
SAFETY-KLEEN GENERAL PURPOSE CLEANER 666 50
| 6834-92-0
497-19-8
7601-54-9
8002-09-3
518-47-8 |
|
COVENTRY S/G SUPER WHITE 0133517
| 57-55-6
13463-67-7 |
|
UNITED 695
| 586-62-9
7705-14-8
80-56-8
79-92-5
99-86-5 |
|
NAMALAC - WHITE 0003016
| 8052-41-3
13463-67-7 |
|
CPS 5000 SERIES COLOR #16515 GRAY 941 SP
| 64742-89-8 |
|
1288 CLEAR SEAL
| |
|
TEMPLATE EMULSIONS
| 7783-96-2
7783-90-6
9009-70-8
10108-64-2 |
|
REFRIGERANT GAS R22 158
| 75-45-6 |
|
REFRIGERANT GAS R11 161
| 75-69-4 |
|
TOUCH-N FOAM INSTANT INSULATION
| 1367-48-5
75-71-8
115-10-6
26447-40-5 |
|
URETHANE PART A R4-026
| 110-43-0
108-88-3
1330-20-7
100-41-4
67-64-1 |
|
URETHANE PART B R0-090
| 28182-81-2
110-43-0 |
|
ALL STYLES OF FIBERGLASS
| 65997-17-3
9005-25-8
9002-89-5 |
|
HUMISEAL STRIPPER 1075
| 71-55-6 |
|
HUMISEAL THINNER 73
| 123-86-4
111-76-2 |
|
PASTE WOOD FILLER INTERIOR SOLVENT BASE 480
| 14807-96-6
64742-88-7 |
|
|