Search   
MSDS  
:
 ISOPAR K
CAS  
:
 
NAME  
:
 hydrotreated heavy naphtha (petroleum) cas no 64742-48-9
Catalog of Chemical Suppliers, Buyers, Custom Synthesis Companies And Equipment Manufacturers
[ ISOPAR K ]
Suppliers:   
Not Available
Buyers:  
Not Available
=====================  Product Identification  =====================

MSDS NAME:ISOPAR K
NIIN:00N001054
MSDS Number: BCGXP
=== Responsible Party ===
Company:EXXON COMPANY
Address:800 BELL ST
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Emergency Phone Num:713-870-6000
CAGE:72447
=== Contractor Identification ===
Company:EXXON COMPANY U.S.A.
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-656-5949 / 713-656-3424
CAGE:29700
Company:EXXON COMPANY, U.S.A.
Address:ROOM 2344
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-656-5949
CAGE:72447

=============  Composition/Information on Ingredients  =============

Name:HYDROTREATED HEAVY NAPHTHA (PETROLEUM) CAS NO 64742-48-9
Fraction by Wt: 100%
ACGIH TLV:300 PPM (MFR)

=====================  Hazards Identification  =====================

Effects of Overexposure:VAPOR:IRRIT EYES,RESP
    TRACT;HDCH,DIZ,ANESTHETIC,CNS EFFCT. EYES:IRRIT. SKIN:DEFAT,IRRIT
    W/POSS DERM

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/CLEAR WATER FOR 15 MIN OR UNTIL IRRIT SUBSIDES;IF
    IRRIT PERSISTS,CALL MD. SKIN:REMOVE CONTAM CLOTHES,WASH THOROUGHLY
    W/SOAP & WATER. INH:REMOVE FROM EXPOS,CALL MD IMMED.START RESUSC OR
    GIV E O*2 AS NEC. INGEST:DO NOT INDUCE VOMIT,CALL MD!!

=====================  Fire Fighting Measures  =====================

Flash Point:120F TCC
Lower Limits:0.7
Upper Limits:7.0
Extinguishing Media:FOAM,WATER SPRAY (FOG),DRY CHEM,CO*2,VAPORIZING LIQ
    TYPE
Fire Fighting Procedures:H*20 MAY BE INEFFCT,USE TO COOL FIRE EXPOS
    CANS,DISPERSE VAP
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID

==================  Accidental Release Measures  ==================

Spill Release Procedures:SHUT OFF & ELIMINATE ALL IGNIT SOURCES. KEEP
    PEOPLE AWAY. RECOVER FREE PRODUCT. ADD SAND,EARTH OR OTHER SUITABLE
    ABSORBENT TO SPILL AREA.MINIMIZE BRTH VAP & SKIN CONTCT. VENTIL
    CONFINED SPACES. OPEN W INDOW/DOORS. KEEP FROM SEWERS,WATER
    COURSES,LAND.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS & STORAGE CONTAINERS
    CLSD WHEN NOT IN USE. DO NOT STORE NEAR HEAT,SPARKS,FLAME OR STRONG
    OXIDANT. WASH AFTER USING. NO SMOKING.
Other Precautions:TO PREVENT FIRE OR EXPLOSION RISK FROM STATIC
    ACCUMULATION & DISCHARGE,EFFECTIVELY GROUND PRODUCT TRANSFER SYSTEM
    IAW NFPA STD FOR PETROLEUM PRODUCTS. NFPA CODES: H:1,F:2,R:0

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD SUPPLIED AIR RESP AS
    CONDITIONS REQ;CONSULT SAFETY
Ventilation:ADEQ TO KEEP BELOW TLV,PREVENT EXPLO CONC;USE EXPLO-PRF EQP
Protective Gloves:CHEM RESISTANT
Eye Protection:SPLASH GOG OR FACE SHIELD
Other Protective Equipment:CHEM RESIST APRON,OTHER IMPERVIOUS CLOTHING
Supplemental Safety and Health
HUMAN HEALTH RISKS VARY W/INDIVIDUALS,FOLLOW PRECAUTIONS. MFR STATES IT
    IS HIGHLY UNLIKELY THE KIDNEY EFFCT SEEN IN MALE RATS HAVE SIGNIF
    IMPLICATION FOR HUMANS AT OR BELOW RECM VAP LIMITS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:345-386F
Vapor Pres:<10
Vapor Density:>5.0
Spec Gravity:0.76
Evaporation Rate & Reference:0.1 (NBU AC = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR WATER-WHITE LIQUID,ESSENTIALLY ODORLESS
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS LIKE LIQ CHLORINE,CONC O*2,NA/CA HYPOCHLORIT
Hazardous Decomposition Products:FUMES,SMOKE,CO,ALDEHYDES & OTHER
    DECOMP PROD - INCOMP CMBUST

====================  Disposal Considerations  ====================

Waste Disposal Methods:ASSURE CONFORMITY W/APPLICABLE GOVERNMENTAL
    REGULATIONS. CONTINUE TO OBSERVE PRECAUSTIONS FOR VOLATIL,FLAMMABLE
    VAPORS FROM ABSORBED MATERIAL. EMPTY CONTAINERS RETAIN RESIDUE
    (LIQ/VAP) & CAN BE DANGER OUS - FOLLOW ALL MSDS PRECAUTIONS
    CAREFULLY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
413 BONDING ADDITIVE 108-65-6
LODYNE HS-300 107-41-5
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,A 111-15-9
1330-20-7
110-43-0
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,B 1330-20-7
111-15-9
110-43-0
AMOCUT TRI-PURPOSE CUTTING OIL
4730 GRAY CHEMICAL RESISTANT URETHANE, PT A 1330-20-7
111-15-9
4730 GRAY CHEMICAL RESISTANT URETHANE, PT B 1330-20-7
111-15-9
ACRYLOID 150 OIL ADDITIVE
19 BLACK INK 67-63-0
71-36-3
AQUA-SOLV 111-76-2
TRIM MIST 7758-09-0
HEPTANE 142-82-5
ATLAC 382 FB 4010A 100-42-5
98-29-3
121-69-7
HETRON 28429 100-42-5
PROTECTIVE CREAM NO. 211 557-05-1
9005-67-8
107-88-0
102-71-6
57-11-4
411 PROTECTIVE CREAM 1314-13-2
57-55-6
102-71-6
106-11-6
57-11-4
EPOXY THINNER RULE 66 78-93-3
67-63-0
110-80-5
108-88-3
1330-20-7
RUBBER REJUVENATOR,HURST NO. 116 108-88-3
67-56-1
78-93-3
75-09-2
110-80-5
SLIPSTREAM 54, (FORMERLY M-54)
VYNA-BOND ADHESIVE 78-93-3
109-99-9
108-94-1
METAL PRIMER A FOR FLEXANE
BIOMET TBTO(BUTINOX) 56-35-9
Y-4695, SPRD LUSTRE DP TNT 5 8030-30-6
VARSOL 18 8030-30-6
ISOPAR K
DALPAD (A COALESCING AGENT) 122-99-6
104-68-7
CASTOLITE-AP 80-62-6
100-42-5
BRAKE FLUID 455 143-22-6
DOWANOL DB 112-34-5
DERAKANE 411-45,VINYL ESTER RESIN 100-42-5
DERAKANE 411-C-50 VINYL ESTER RESIN, 19634 100-42-5
DOWFROST,HEAT TRANSFER FLUID 57-55-6
7758-11-4
7732-18-5
ESTERON 245 BE HERBICIDE 2545-59-7
ADDITIN 30, R-660 90-30-2
91-59-8
GULFCUT HD SOLUBLE OIL 8012-95-1
ALUMICUT 8008-20-6
D.E.H. (R) 24 EPOXY CURING AGENT, 19191 112-24-3
4097-89-6
6531-38-0
24028-46-4
DERAKANE 510A VINYL ESTER RESIN, 12247 100-42-5
68140-84-1
ADIPRENE L-83 584-84-9
SULFURIC ACID, ELECTROLYTE 7664-93-9
RIDGID NUCLEAR THREAD CUTTING OIL, 16043 64742-50-3
920-Y-131 MIL-C-4556D TYPE G PRIMER 71-36-3
920-W-966,MIL-C-4556D TYPE G TOPCOAT 71-36-3
8002-05-9
1330-20-7
DENFLEX 1162-A 79-46-9
DENFLEX 1162-B
INSECTICIDE,METHYL BROMIDE,TYPE 2 74-83-9
DULUX 21667-D,PURE WHITE ALKYD ENAMEL 108-88-3
1330-20-7
7439-92-1
DULUX 72092-D,GRAY ALKYD ENAMEL 1330-20-7
7439-92-1
108-88-3
DULUX 77-S,ENAMEL HARDENER 108-88-3
1330-20-7
7440-31-5
VARI-TEMP 3864-S,ENAMEL REDUCER 1330-20-7
80-15-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com