=====================  Product Identification  =====================

MSDS NAME:FOIL-FAST EPOXY INJECTION GEL COMPONENT A - (SUPDAT)
NIIN:00N066956
Kit Part:Y
MSDS Number: CBFCR
=== Responsible Party ===
Company:THE RAWLPLUG COMPANY
Address:TWO FB POWERS SQUARE
City:NEW ROCHELLE
State:NY
ZIP:10802
Country:US
Info Phone Num:914-235-8300
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:0D064
=== Contractor Identification ===
Company:THE RAWLPLUG COMPANY
Address:TWO FB POWERS SQUARE
Box:City:NEW ROCHELLE
State:NY
ZIP:10802
Country:US
Phone:914-235-8300
CAGE:0D064

=============  Composition/Information on Ingredients  =============

Name:CALCIUM CARBONATE; (COATED PRECIPITATED CALCIUM CARBONATE)
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:10 MG/M3 (MFR)

Name:MODIFIED BISPHENOL A/EPICHLOROHYDRIN BASE EPOXY RESIN
CAS:25068-38-6
RTECS #:SL6475000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/M3 RDUST

Name:ZINC OXIDE (SARA 313) (CERCLA)
CAS:1314-13-2
RTECS #:ZH4810000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE REVERSIBLE
    INFLAMMATORY EFFECT ON UPPER RESPIRATORY SYSTEM. SKIN CONTACT: MAY
    CAUSE REVERSIBLE INFLAMMATORY EFFECT ON SKIN OR TISSUE AT SITE OF
    CONTACT. CAUSES AN ALLERGIC SENSIT IZATION IN A SUBSTANTIAL PORTION
    OF HUMANS OR ANIMALS IN NORMAL TISSUE AFTER REPEATED EXPOSURES. EYE
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CONTACT: EYE IRRITANT. INGESTION: MAY
    CAUSE EFFECTS TO THE GI TRACT, USUALLY RESULTING FROM INGESTION OF
    THE MATERIAL SUCH AS IRRITATION, NAUSEA, GI DISORDERS, ULCERATION,
    DIARRHEA OR CONSTI PATION.
Medical Cond Aggravated by Exposure:ASTHMA TYPE CONDITIONS, CHRONIC
    BRONCHITIS AND OTHER CHRONIC RESPIRATORY CONDITIONS. RECURRENT SKIN
    ECZEMA. PRESENSITIZATION TO PRODUCT.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED,
    INSTITUTE ARTIFICIAL RESPIRATION. CONSULT MD. SKIN: WASH SKIN
    THOROUGHLY WITH WATER. REMOVE CONTAMINATED CLOTHING. IF SYMPTOMS
    PERSISTS, CONSULT M D. EYES: RINSE EYES THOROUGHLY WITH WATER FOR
    AT LEAST 15 MINUTES. CONSULT MD. INGEST: DILUTE WITH WATER. CONSULT
    MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>220F,>104C
Extinguishing Media:FOAM/WATER FOG/DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID CONTACT WITH THE MATERIAL. WEAR SUITABLE
    PROTECTIVE CLOTHING. CONTAIN SPILL AND COLLECT WITH ABSORBENT
    MATERIAL AND TRANSFER INTO SUITABLE CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY AREA BETWEEN 40F
    TO 90F. KEEP CONTAINERS TIGHTLY CLOSED AND SEALED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR IS
    RECOMMENDED, ESPECIALLY IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST IS HIGHLY RECOMMENDED. MECHANICAL EXHAUST IS
    HIGHLY RECOMMENDED.
Protective Gloves:CHEM RESISTANT PLASTIC OR RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . AVOID
    SKIN CNTCT. WEAR LONG SLEEVE SHIRT & LONG PANTS & OTHER APPROP
    PROT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: BASE RESIN.

==================  Physical/Chemical Properties  ==================

Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:WHITE PASTE; MILD AROMATIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:EXOTHERM WHEN CURING IN MASS.
Hazardous Decomposition Products:NITROGEN OXIDES, CARBON MONOXIDE,
    CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL ENVIRONMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***