===================== Product Identification =====================
MSDS NAME:AMICON T661A
NIIN:00N066955
Kit Part:Y
MSDS Number: CBFCP
=== Responsible Party ===
Company:EMERSON & CUMING INC
Address:77 DRAGON COURT
City:WOBURN
State:MA
ZIP:01888
Country:US
Info Phone Num:617-928-3300
Emergency Phone Num:617-935-4850; 617-938-3630
Preparer's Name:DAVID HAAS
CAGE:DO244
=== Contractor Identification ===
Company:EMERSON & CUMING
Address:55 HAYDEN AVE
Box:City:LEXINGTON
State:MA
ZIP:02173
Country:US
Phone:617-861-6600
CAGE:0B562
Company:EMERSON & CUMING INC DIV/W R GRACE CO
Address:117 DRAGON COURT
City:AUOBURN
State:MA
ZIP:01888
Phone:(617) 935-4850 OR (617) 938-8630
CAGE:DO244
============= Composition/Information on Ingredients =============
Name:MODIFYING AGENT; (MODIFIERS) (MIXTURE WITH ING 2)
Fraction by Wt: <2%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:PIGMENTS
Fraction by Wt: <2%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ALUMINUM OXIDE (2:3); (ALUMINUM OXIDE) (SARA 313)
CAS:1344-28-1
RTECS #:BD1200000
Fraction by Wt: 70-80%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
Name:EPOXY RESIN
Fraction by Wt: 20-30%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:PROPANE, 1-BUTOXY-2,3-EPOXY-; (N-BUTYL GLYCIDYL ETHER)
(BGE)
CAS:2426-08-6
RTECS #:TX4200000
Fraction by Wt: 2-5%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM
Name:SPILL PROCS: IN SEALED CNTNRS. FOR LG SPILLS: DIKE TO
CONTAIN SPILLED MATL & TO PVNT RUNOFF INTO DRAINS, SEWERS (ING 7)
RTECS #:9999999ZZ
Name:ING 6: & OTHER WATERWAYS. SHOVEL/PUMP TO DRUM/SALVAGE TANK.
ABSORB RESIDUAL MATL W/SAND, VERMICULITE OR OTHER (ING 8)
RTECS #:9999999ZZ
Name:ING 7: ABSORBENT MATERIAL. SCRAPE OR SHOVEL INTO
CONTAINERS.
RTECS #:9999999ZZ
Name:OTHER PRECS: PERSON KNOWLEDGEABLE IN INTENDED USAGE CNDTNS
& EQUIP. THIS CMPD CAUSES EYE & SKIN IRRIT & MAY (ING 10)
RTECS #:9999999ZZ
Name:ING 9: CAUSE ALLERGIC SKIN REACTIONS.
RTECS #:9999999ZZ
Name:OTHER PROT EQUIP: OR OTHER IMPERVIOUS CLOTHING, IF
REQUIRED, IN ORDER TO PREVENT CONTAMINATION OF CLOTHING.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL:VAPS AT ELEVATED TEMPS
MAY CAUSE IRRIT. EYE/SKIN:IRRIT UPON DIRECT CNTCT. PRLNGD EXPOS MAY
RSLT IN SKIN SENSIT. INGEST:HARMFUL IF SWALLOWED. CHRONIC: ALTHOUGH
SIGNIFICANCE IS UNKNOWN, EPO XY RESIN IN PROD HAS BEEN SHOWN TO BE
MUTAGENIC IN SOME MICROBIAL TESTS BUT HAS FAILED TO SHOW (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MUTAGENICITY IN OTHERS. CHROMOSOMAL
ABERRATIONS WERE OBSERVED IN CULTURED RAT LIVER CELLS. EXPOS TO
FILLER MATL IS UNLIKELY TO OCCUR UNLESS PROD IS APPLIED IN MANNER
WHICH RSLTS IN GENERATION OF MISTS/FUMES OR WHEN MACHINING OF PROD
RSLTS IN GENERATION OF DUST PARTICLES. RECENT STUDIES INDICATE
(SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHAL: REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING
DIFFICULT; GIVE ARTIFICIAL RESPIRATION IF NOT BREATHING; GET
IMMEDIATE MEDICAL ATTENTION. EYES: IMMEDIATELY FLUSH EYES WITH
WATER FOR AT LEAST 15 M INUTES; GET MEDICAL ATTENTION. SKIN: REMOVE
CONTAMINATED CLOTHING. WASH AFFECTED AREA WITH WATER. INGEST:
DILUTE WITH WATER. GET IMMEDIATE MEDICAL ATTENTION. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST.
===================== Fire Fighting Measures =====================
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOX VAPS MAY BE EVOLVED UPON EXPOS TO
HEAT/OPEN FLAME. IF EXPOS TO ELEVATED TEMPS FOR EXTENDED PERIODS OF
TIME, SPONT EXOTHERMIC POLYM MAY OCCUR, RSLTG (SUPDAT)
================== Accidental Release Measures ==================
Spill Release Procedures:NOTE:CLEANUP OF LG SPILLS SHOULD BE DONE I/A/W
PROVISIONS OF OSHA 29CFR 1910.120 ("HAZ WASTE OPERATIONS & EMER
RESPONSE"). SEE PERSONAL PROT EQUIP GUIDELINES. FOR SM SPILLS: WIEP
UP OR ABSORB W/VERMIC ULITE OR OTHER ABSORB MATL. COLLECT WASTE
(ING 6)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. CONSULT TECHNICAL DATA SHEET FOR STORAGE INSTRUCTIONS. KEEP
AWAY FROM INTENSE HEAT, OPEN FLAMES.
Other Precautions:RECOMS DESCRIBED FOR SPEC PRECS/PERSONAL PROT EQUIP
ARE PROVIDED AS GEN GUIDANCE FOR MINIMIZING EXPOS WHEN HNDLG PROD.
BECAUSE USAGE CNDTNS VARY DEPENDING ON CUSTOMER APPLICATION,
SPECIFIC SAFE HNDLG PROCS SHOULD BE DEVELOPED BY (ING 9)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR AN APPROPRIATE, PROPERLY FITTED, NIOSH/MSHA
APPROVED RESPIRATOR WHEN CONTAMINANT LEVELS EXCEED THE RECOMMENDED
EXPOSURE LIMITS.
Ventilation:PREVENT BREATHING OF VAPORS, MIST OR SPRAY. USE ONLY WITH
PROPER MECHANICAL EXHAUST VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . WEAR
GLOVES & PROT CLTHG TO PVNT EXPOS. USE CHEM-RESISTANT APRON (ING
11)
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING AND WASH BEFORE
REUSE. DO NOT INGEST OR SWALLOW THIS MATERIAL.
Supplemental Safety and Health
EXPLO HAZ:IN VIOLENT RUPTURING OF SEALED CNTNRS. MATL TO AVOID: ACIDS,
ALCOHOL. EFTS OF OVEREXP:BUTYL & PHENYL GLYCIDYL ETHERS MAY INDUCE
MUTAGENIC CHGS IN LAB ANIMALS. THIS HAS NOT BEEN RELATED TO HU MAN
EXPOS, HOWEVER, GOOD VENT & INDUS HYGIENE PRACTS SHOULD BE FOLLOWED
WHEN HNDLG CMPDS CNTNG EITHER BGE OR PGE.
================== Physical/Chemical Properties ==================
Vapor Pres:<1 @ 25C
Vapor Density:HVR/AIR
Spec Gravity:2.3-2.4(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE PASTE; VERY SLIGHT, IF ANY, ODOR.
Percent Volatiles by Volume:<1 WT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, AMINES, AMIDES, STRONG LEWIS/MINERAL ACIDS,
MERCAPTANS, ANHYDRIDES, THIOSULFATES, CARBOXYLIC (SUPDAT)
Stability Condition to Avoid:STORAGE IN OPEN CNTNRS, EXPOSURE TO HEAT
&/OR OPEN FLAME, UNCONTROLLED MIXING WITH (OR EXPOS TO) INCOMPAT
SUBSTANCES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ALDEHYDES, ACIDS.
Conditions to Avoid Polymerization:HAZARDOUS POLYMERIZATION MAY OCCUR
IF EXPOSED TO HEAT OR OPEN FLAME.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF SPILLED MATERIAL IN ACCORDANCE WITH
CURRENT LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|