===================== Product Identification =====================
MSDS NAME:WR-LPU PAINT BASE CLEAR
NIIN:00N066979
Kit Part:Y
MSDS Number: CBFFD
=== Responsible Party ===
Company:SYSTEMS THREE RESINS INC
Address:1155 NW 46TH STREET
Box:70436
City:SEATTLE
State:WA
ZIP:98107
Country:US
Info Phone Num:206-782-7976
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:WKH
CAGE:0N8J4
=== Contractor Identification ===
Company:SYSTEMS THREE RESINS INC
Address:1155 NW 46TH STREET
Box:70436
City:SEATTLE
State:WA
ZIP:98107
Country:US
Phone:206-782-7976
CAGE:0N8J4
============= Composition/Information on Ingredients =============
Name:2-PYRROLIDINONE, 1-METHYL-;(N-METHYL-2-PYRROLIDONE)
CAS:872-50-4
RTECS #:UY5790000
Fraction by Wt: <8%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:TRIETHYLAMINE;(N,N-DIETHYLETHANAMINE) (CERCLA)
CAS:121-44-8
RTECS #:YE0175000
Fraction by Wt: <2%
OSHA PEL:25 PPM
ACGIH TLV:1 PPM; 5 STEL, S
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:ETHANOL, 2-(2-ETHOXYETHOXY)-, ACETATE; (DIETHYLENE GLYCOL
MONOETHYL ETHER ACETATE)
CAS:112-15-2
RTECS #:KK8295000
Fraction by Wt: <2%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:VOLATILE ORGANIC CONTENT: 105 GM/L.
RTECS #:9999999VO
Name:SPILL PROC: DIATOMACEOUS EARTH, SAWDUST OR OTHER ABSORBENT,
AND SHOVELED INTO DISPOSAL CONTAINERS.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE IRRITATION TO SKIN
AND SEVERE IRRITATION TO EYES. CHRONIC: MAY CAUSE SKIN
SENSITIZATION OR OTHER ALLERGIC RESPONSE FROM PROLONGED AND
REPEATED CONTACT. IF IS NOT EXPECTED THAT ANY OF THE INGREDIENTS
ARE CARCINOGENIC.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:THIS MATERIAL MAY BE A SKIN
SENSITIZER IN CERTAIN SUSCEPTIBLE PERSONS. SENSITIZED PERSONS ARE
NOT KNOWN TO HAVE OTHER HEALTH PROBLEMS AS A RESULT OF
SENSITIZATION.
======================= First Aid Measures =======================
First Aid:INHAL: REMOVE TO FRESH AIR & PROVIDE O*2 IF BRTHG IS DFCLT.
GIVE ARTF RESP IF NOT BRTHG. GET MED ATTN. INGEST: INDUCE VOMIT.
GET IMMED MED ATTN. SKIN: REMOVE CONTAM CLTHG & SHOES & WIPE EXCESS
OFF SKI N. FLUSH SKIN W/WATER. FOLLOW BY WASHING IN SOAP & WATER.
IF IRRIT OCCURS, SEEK MED ATTN. DO NOT REUSE CLTHG UNTIL CLEANED.
CONTAM LEATHER ARTICLES (SHOES) CAN NOT BE DECONTAM & SHOULD BE
(SUP DAT)
===================== Fire Fighting Measures =====================
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE USED TO COOL FIRE EXPOSED CNTNRS. TOXIC FUMES
MAY BE EVOLVED WHEN THIS SUBSTANCE BURNS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
================== Accidental Release Measures ==================
Spill Release Procedures:VENT AREA. AVOID CONT W/MATL. PERS NOT WEARING
APPROP PROT EQUIP SHOULD LEAVE AREA OF SPILL UNTIL CLEANUP IS
COMPLETE. STOP SPILL AT SOURCE, DIKE AREA TO PVNT SPREADING, PUMP
LIQUID TO SALV TANK/DRUM. REMAINING LIQ MAY BE TAKEN UP ON
CLAY,(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD RESP IS REQD WHEN SPRAYING
THIS MATL. FOR EMERS, A NIOSH/MSHA APPRVD SCBA OR FULL-FACED
RESPIRATOR IS RECOMMENDED.
Ventilation:PROVIDE ADEQUATE VENTILATION IN WORK AREAS. CONFINE
MATERIAL IN SEALED CONTAINERS WHEN NOT IN USE.
Protective Gloves:NEOPRENE/VINYL/RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGG (SUP DAT)
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA. WEAR BODY-COVERING CLTHG TO AVOID SKIN
CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: DESTROYED. EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST
15 MIN. SEEK IMMED MED ATTN. SPILL PROC: DIATOMACEOUS EARTH,
SAWDUST OR OTHER ABSORBENT AND SHOVELED INTO DISPOSAL CONTAINERS.
EYE PROT: & FULL LENGTH FSHLD .
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>190F,>88C
Vapor Density:HVR/AIR
Spec Gravity:9.5 #/GAL
Evaporation Rate & Reference:NONVOLATILE
Solubility in Water:TOTAL
Appearance and Odor:CLEAR TO HAZY LIQUID.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, MINERAL ACIDS.
Stability Condition to Avoid:HEAT WILL COAGULATE PRODUCT.
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN.
==================== Disposal Considerations ====================
Waste Disposal Methods:WASTE IS NOT HAZARDOUS BY RCRA CRITERIA (40 CFR
261). PLACE IN AN APPROPRIATE DISPOSAL FACILITY IN COMPLIANCE WITH
LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|