=====================  Product Identification  =====================

MSDS NAME:CAAPCOAT FE-AS OR FLUOROELASTOMER CURING AGENT
NIIN:01-126-1427
Status Code:A
Kit Part:Y
MSDS Number: CKNMQ
=== Responsible Party ===
Company:CAAP CO INC
Address:152 PEPES FARM ROAD
City:MILFORD
State:CT
ZIP:06460
Info Phone Num:(203) 877-0375
Emergency Phone Num:7035273887
Chemtrec Ind/Phone:(800)424-9300
CAGE:6P753
=== Contractor Identification ===
Company:CAAP CO INC
Address:152 PEPES FARM ROAD
Box:City:MILFORD
State:CT
ZIP:06460
Phone:(203) 877-0375
CAGE:6P753

=============  Composition/Information on Ingredients  =============

Name:METHYL ISOBUTYL KETONE
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 35%
Other REC Limits:75PPM STEL
OSHA PEL:50PPM TWA
ACGIH TLV:50PPM TWA
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ALIPHATIC AMINE
RTECS #:TS1003232
Fraction by Wt: 65%
Other REC Limits:5MGB/M3-WEEL)AIHA)
ACGIH TLV:0.5PPM

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACTPERMIABLE TO SKIN  MAY
    DAMAGE EYES IRRITATE SKIN ND CAUSE RESPIRATORY IRRITATION UPON
    INHALATION. CHRONIC; REPEATED R PROLONGED EXPOSURE MAY CAUSE
    DEFATTING OF TEH SKIN, DERMATITUS AND P OSSIBLE SENSITIZATION.
    INHALATION OF VERY HIGHG VIPOR CONCENTRATRIONS ABOVE PEL'S MAY
    CAUSE NEURAL IMPAIRMENT, KIDNE AND LIVER DAMAGE.
Explanation of Carcinogenicity:PRODUCT GAVE A NEGATIME AMES SREEN TEST
    RESULT; NONE OF THE INGREDINTS ARE LISTED AS CARCINOGENT.
Effects of Overexposure:VAPOR EXPOSURE; BURINING EYES, HEADACHE AND
    DIZINESS, THROAT IRRITATION LOSS OF APPETITE NAUSEA. CONTACT:
    COROSIE ACCORDING TO DOT COROSIVITY TEST. MAY CAUSE IRRITATION OF
    SKIN. BUTNING OF SKIN OR EYE S.
Medical Cond Aggravated by Exposure:PREEXISTING ALLERGIES EYE SKIN AND
    RESPIRATORY DISORDERS.

=======================  First Aid Measures  =======================

Eyes: FLUSWH WITH WATER FOR 16 MINUTES. GET IMMEDIATE MECICAL
    ATTENTION. SKIN: WASH WELL WITH SOAP AND WATER, REMOVE CONTAMINAGED
    CLOTHING. IF IRRITATION PRRSISTS OR IF SIGNS AND SYMPTOMES OF
    OVEREXPO SURE EXIST, GET IMMEDIATE MEDICAL ATTENTION. INHALATION,
    REMOVE TO FRESH AIR, GIVE ARTIFICIAL RESPIRATION IF NOT BEEATHING.
    IF BREATHING IS DIFFICAULT, GIVE OXYGEN. GET IMMEDIATE MEDICAL
    ATTENTION. IN GESTION: DO NOT INDUCE VOMITING, GET IMMEDIATE
    MEDICAL ATTTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:=23.3C, 74.F
VALUES FOR MBK
Lower Limits:1.2
Upper Limits:8.0
Extinguishing Media:(ALL ABOVE VALUES FOR MBK.) CO2 FOAM DRY CHEMICAL.
Fire Fighting Procedures:USE FULL PROTECTIVE GEAR INCLUDING A SCBA AND
    CHEMICLA PROTECTIVE SUIT FOR AMINE/AMONIA TYPE CORROSSIVE VAPORS. 
    KEEP PERSONELLE UPWIND OF HE FIRE.
Unusual Fire/Explosion Hazard:NONE. THE PRODUCT IS A FLAMABLE LIQUID. 
    TJE PRODUCT BEOMES A COOSIVE LIQUID UPON THE ADDITION OF WATER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AND DO NOT
    SMOKE IN THE AREA. WEAR PROTECTIVE EQUIPMENT INCLUDING SOLVENT
    RESISTENT GLOVES, APRON, BOOTS, AND A SCBA IN THE PRESSURE DEMAND
    MODE, OR A POSITIVE PRESSURE  AIR SUPPLIED RESPIRATOR.  CONTAIN
    SPILL WITH ANABSORBANT MATERIAL. CLEAN THE ABSORBANT AND CONTAIN
    SECURELY. SWEEP &WET MOP THE AFECTED AREA WITH SOAP AND WATER.
    VENTILATE AREA AS WELL AS POSSIBLE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF USE CONDITIONS GENERATE VAPORS OR MISTS WEAR
    A NIOSH MSCIA APPROVED RESPIRATOR APPROPRIATE FOR EMITIONS AT POINT
    OF USE.  APPROPRIATE RESPIRATORS INCLUDE A FULL FACEPIECE OR A
    PURIFYING CARTRIGGE R ESPIRATOR EQUIPPED FOR ORGANIC BAPROD AND
    MISTS, A SCBA IN THE PRESSURE DEMAND MODE, R A POSITIVE PRESSURE
    AIR-SUPPLIED RESPIRATOR.
Ventilation:THIS PRODUCT IS NOT USED ALONE, IT IS USED IN CONJUNCTION
    WITH AAAPCOAT FLUOROELSTROMER COATING. A SPRAY BOOTH IS REQUIRED
    FOR SPRYA APPLICATIONS. ONLY PROPPERC
Protective Gloves:SOLVENT RESISTENT GLOVES
Eye Protection:SOLVENT RESISTENT GLASSES/GOGGLES/FACE PIECE.
Other Protective Equipment:AN EYE WASH AND SAETY SHOWER SHOULD BE
    NEARBY AND READY FOR USE.  WEAR AN APRON.
Work Hygienic Practices:DO NOT WEAR CONTACT LENSES WHEN EARING THIS
    PRODUCT BECAUSE CONTACT LENSES CONTRIBUEE TO THE SEVERITY OF AN EYE
    INJURY.  WASH WELL WITH SOAP AND WATER AFTER HANDLING THE PRODUCT.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:=116.1C, 241.F
B.P. Text:241F
Vapor Pres:15MMHG
Vapor Density:3.5AIR=1
Spec Gravity:0.83H2O=1 CURING AGENT
Evaporation Rate & Reference:1.6 BUTYL ACETATE=1
Solubility in Water:SLIGHT (CURING AGENT)
Appearance and Odor:CLEAR YELLOW LIQUID/PUNGENT ODOR (CURING AGENT)

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A VIGOROUS REACTION. LIQUID CHLORINE CAN
    REACT EXPLOSIVELY WITH DIBUTYL PHTHALATE.
Stability Condition to Avoid:HIGH HEAT, SPARKS, FLAMES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INDINERATION IN AN APPROPRIATELY DESIGNED AND
    LICINCES INCINERATOR IS PREFERRED; THIS IS A RCRA HAZARDOUS
    IFNITABLE WASTE. RWGUALTIONS MAY VARY FROM STATE TO STATE; DISPODE
    OF ACCORDIG TO STATE, FEDER AL AND LOVAL REGULATIONS.

===================  MSDS Transport Information  ===================

Transport Information:SHIPPING NAME: PAINT RELATEC MATERIAL DOT
    CLASSIFICATION 3 (FLAMMABLE LIQUID)

=====================  Regulatory Information  =====================

SARA Title III Information:METHYLISOBUTYLKETONE MBK.
Federal Regulatory Information:AL INGREDIENTS ARE TSCA LISTED.
State Regulatory Information:THE FOLLOWING CHEMICALS ARE SPECIFICALLY
    LISTED BY INDIIDUAL STATES: OTHER PRODUCT SPCIFIC HEALTHE AND
    SAFETY DATA IN OTHER SECTIONS OF THE MSDS MAY BE APPLICABLE FOR
    STATE REQUIREMENTS. FOR DEDAILS O N YOUR REGULATORY REQUIREMENTS,
    YOU HSOULD CONTACT THE APPROPRIATE AGENCY IN YOUR STATE.  MBK: CA,
    MA PA, RIGHT-TO-KNOW.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***