===================== Product Identification =====================
MSDS NAME:CAAPCOAT B-274 BLACK POLYURETHANE RAIN EROSION COATING PER M
NIIN:00-459-1756
Status Code:A
MSDS Number: CKNMH
=== Responsible Party ===
Company:CAAP CO INC
Address:152 PEPE'S FARM RD
City:MILFORD
State:CT
ZIP:06460
Country:US
Info Phone Num:203-877-0375
Emergency Phone Num:703-527-3887
Chemtrec Ind/Phone:(800)424-9300
CAGE:60922
=== Contractor Identification ===
Company:CAAP CO INC
Address:152 PEPE'S FARM RD
Box:City:MILFORD
State:CT
ZIP:06460
Country:US
Phone:203-877-0375
CAGE:60922
============= Composition/Information on Ingredients =============
Name:XYLENE
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 44%
Other REC Limits:150 PPM-STEL
OSHA PEL:100PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:METHYL ISOBUTYL KETONE
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 16%
Other REC Limits:75 PPM-STEL
OSHA PEL:50 PPM TWA
ACGIH TLV:50 PPM TWA
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:RESIDUAL METHYLENE BIS ( 4-CYCLOHEXYLISOCYANATE )
CAS:5124-30-1
RTECS #:HQ9250000
Fraction by Wt: <0.5%
OSHA PEL:0.01 PPM CEILING
ACGIH TLV:0.005 PPM TWA
Name:ISCOYANATE TERMINATED POLYESTER PREPOLYMER
CAS:54954-83-5
Fraction by Wt: 39.8%
Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: 0-0.5%
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3
===================== Hazards Identification =====================
Health Hazards Acute and Chronic:CONTACT MAY DAMAGE EYE , IRRITATE
SKIN, AND CAUSE RESPIRATORY IRRITAITON UPON INHALATION. CHRONIC
HEALTH HAZARDS: REPEATED OR PROLONGED EXPOSURE MAY CAUSE DEFATTING
OF THE SKIN, DERMATITIS, AND POSS IBLE SENSITIZATION. INHALATION
OF VERY HIGH VAPOR CONCENTRATIONS OR PROLONGED EXPOSURE MAY CAUSE
NEURAL DYSFUNCTION, KIDNEY AND LIVER DAMAGE.
Effects of Overexposure:VAPOR EXPOSURE: BURNING EYES, HEADACHE,
DIZZINESS, THROAT IRRITATION. LOSS OF APPETITE. NAUSEA. CONTACT:
MAY CAUSE IRRITATION OF SKIN, BURING OF SKIN OR EYES.
Medical Cond Aggravated by Exposure:PREEXISTING ALLERGIES, EYE,SKIN AND
RESPIRATORY DISORDERS.
======================= First Aid Measures =======================
Eyes: FLUSH WITH WATER, GET IMMEDIATE MEDICAL ATTENTION.
SKIN: REMOVE CONTAMINATED CLOTHING. WASH SKIN PROMPTLY WITH SOAP
AND WATER. REPEAT IF NECESSARY. IF SIGNS AND SYMPTOMS OF EXPOSURE
EXIST, GET IMMEDIATE MEDICAL ATTENTION. INHALATION: REMOVE TO
FRESH AIR, GIVE ARTIFICIAL RESPIRATION IF NECESSARY, GET IMMEDIATE
MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING GET
IMMEDIATE MEDICA L ATTENTION IF VOMITING OCCURS SPONTANEOUSLY. KEEP
VICTIM'S HEAD BELOW HIS HIPS TO PREVENT BREATHING VOMITUS INTO
LUNGS.
===================== Fire Fighting Measures =====================
Flash Point Method:TOC
Flash Point:=20.C, 68.F
TOC68F
Lower Limits:1
Upper Limits:8
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USUAL METHODS FOR FLAMMABLE LIQUIDS. THE
PRODUCT IS NOT MISCIBLE WITH WATER. ALTHOUGH WATER MAY BE USED TO
COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:NONE, PROUDUCT IS A FLAMMABLE LIQUID.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION &DO NOT SMOKE
IN THE AREA. WEAR PROTECTIVE EQUIPMENT INCLUDING SOLVENT RESISTANT
GLOVES, APRON, BOOTS, &A SCBAIN THE PRESSURE DEMAND MODE OR A
POSITIVE PRESSURE AIR-SUP PLIED RESPIRATOR. CONTAIN THE SPILL WITH
DIKES OF ABSORBENT MATERIAL AND SOAK UP THE SPILL WITH THE
ABSORBENT MATERIAL. CLEAN UP THE ABSORBENT AND CONTAIN SECURELY.
*
====================== Handling and Storage ======================
Other Precautions:** THE SOLID END PRODUCT IS A NON-HAZARDOUSE LANDFULL
ITEM.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF USE CONDITIONS GENERATE VAPORS OR MISTS WEAR
A NIOSH APPROVED RESPIRATOR APPROPRIATE FOR THOSE EMISSION LEVELS
AT POINT OF USE. APPROPRIATE RESPIRATORS INCLUDE A FULL FACEPIECE
OR A PURIFYING CAR TIRDGE EQUIPPED FOR ORGANIC VAPORS AND MISTS, A
SELF-CONTAINED BREATHING APPARATUS IN THE PRESSURE DEMAND MODE, OR
A POSITIVE PRESSURE AIR-SUPPLIED RESPIRATOR.
Ventilation:VENTILATION: A SPRAY BOOTH IS REQUIRED FOR SPRAY
APPLICATIONS.
Protective Gloves:SOLVENT RESISTENT GLOVES
Eye Protection:SOLVENT RESISTENT GOGGLES
Other Protective Equipment:AN EYEWASH AND SAFETY SHOWER SHOULD BE
NEARBY AND READY FOR USE.
Work Hygienic Practices:WASH WELL AFTER USE.
Supplemental Safety and Health
ONLY PROPERLY TRAINED AND PROTECTED PERSONNEL SHOULD BE IN THE
IMMEDIATE SPRAY AREA. THE EXHAUST VENTILATION SHOULD BE SUFFICIENT
TO KEEP THE AIRBORNE CONCENTRATIONS BELOW THE PEL'S. VENTILATION
SYS TEMS SHOULD BE DESIGNED TO DRAW AIR PAST THE OPERATOR, THEN
PAST THE SOURCE OF THE VAPOR. AND THEN TO THE EXHAUST.
================== Physical/Chemical Properties ==================
Boiling Pt:>116.1C, 241.F
B.P. Text:241-281F ( 116-138C )
Vapor Pres:( MM HG ) : 8
Vapor Density:AIR=1 3.6
Spec Gravity:0.96 ( COATING )
VOC Pounds/Gallon:519
pH:6.0
VOC Grams/Liter:4.33
Viscosity:250-500 CPS AT 75+/-2 F
Evaporation Rate & Reference:.85
Solubility in Water:INSOLUABLE COAT
Appearance and Odor:LIGHT TO DRK GRY OR GRN LIQUID, AROMATIC SOLVENT O
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
THE PRODUCT IS INCOMPATIBLE WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:THE PRODUCT IS STABLE BUT SHOULD BE KEPT
AWAY FROM ALL IGNITION SOURCES, HOT SURFACES, AND TEMPERATURE ABOVE
100 F ( 38 C )
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN, AS WELL AS TRACES OF HCN MAY BE RELEASED DURING
COMBUSTION.
=================== Toxicological Information ===================
Toxicological Information:VENTILIATION SHOULD BE IN ACCORDACNE WITH
ACGIH GUIDELINES AS CONTAINED IN ITS INDUSTRIEAL VENTILATION
PUBICATION.
===================== Ecological Information =====================
Ecological:*SWEEP AND WET MOP THE AFFECTED AREA WITH SOAP AND WATER.
VENTILATED THE AREA AS WELL AS POSSIBLE.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATION IN AN APPROPRIATELY DESIGNED AND
LICENSED INCUNERATOR IS PROFERRED THIS IS A RCRA HAZARDOUS
IGNITABLE WASTE. REGULATIONS MAY VARY FROM STATE TO STATE.
DISPOSE OF ACCORDING TO STATE, LOC AL, AND FEDERAL REGULATIONS WHEN
THE FP-200, CURING AGENT AND ACCELERATOR ARE MIXED TOGETHER AND THE
SOLVENT IS ALLOWED TO EVAPORATE,**
=================== MSDS Transport Information ===================
Transport Information:THE USER MUST BE FULLY PROTECTED FROM EXPOSURE TO
THE MATERIAL CURING MIXING AND SPRAY APPLICATION. IF EXPOSURE
MIGHT OCCUR A FULL PERMEATION RESISTANT PROTECTIVE SUIT INCLUDING
HEAD COVERING, FACE S HIELD, GLOVES, AND OVERSHORES IS REQUIRED.
===================== Regulatory Information =====================
State Regulatory Information:MIBK, MEK, XYLENE: MA, PA RIGHT-TO-KNOW.
METHYLENE
BIS (4-CYCLOHEXYLISOCYANTE) : MA, NJ, PA
RIGHT-TO-KNOW.
======================= Other Information =======================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|